码迷,mamicode.com
首页 > 其他好文 > 详细

sap ftp 处理

时间:2014-07-14 10:48:27      阅读:249      评论:0      收藏:0      [点我收藏+]

标签:des   blog   http   使用   strong   文件   

【转】

本文示例如何使用SAP FTP Function将文件从应用服务器传输到另外一个FTP服务器上。

DATA: BEGIN OF ig_ftp_result OCCURS 0,
        line(100),
      END OF ig_ftp_result.

DATA: l_path(128)       TYPE c.  "文件路径,必须以/结尾
DATA: l_filename(128)   TYPE c.  "文件名
DATA: l_ftpcommand(100) TYPE c.  "FTP命令
DATA: l_handle          TYPE i.                 "HAND
"源路径,必须以/结尾
DATA: cons_source(128) TYPE c . " VALUE ‘/usr/sap/SY-SYSID/SYS/src/‘.
DATA:  cons_dens LIKE zftpt-zpath.                      "目标路径

CONSTANTS cons_key TYPE i  VALUE 26101957.

*// INITIALIZATION
INITIALIZATION.
*服务器上下载文件的路径
  CONCATENATE ‘/usr/sap/‘ sy-sysid ‘/SYS/src/‘ INTO cons_source.

*// START OF SELECTION
START-OF-SELECTION.
  PERFORM frm_ftp_file.


FORM frm_ftp_file .
  DATA:
    l_dstlen          TYPE i,                 "DESTINATION LEN
    l_pw(64)          TYPE c.                 "密码

* 连接FTP服务器
  l_pw = ‘password‘.

*-- FTP_CONNECT requires an encrypted password to work 
*   CREATE THE NEW PW BASE ON LOGIN FTP PASS WORD.
  CALL ‘AB_RFC_X_SCRAMBLE_STRING‘         "PASS WORD BUILD FUNCTION
    ID ‘SOURCE‘      FIELD l_pw           "PASS WORD
    ID ‘KEY‘         FIELD cons_key      "THE KEY TO CREATE NEW PW
    ID ‘SCR‘         FIELD ‘X‘
    ID ‘DESTINATION‘ FIELD l_pw           "PASS WORD
    ID ‘DSTLEN‘      FIELD l_dstlen.      "NEW PASS WORD LEN

  DO 3 TIMES.
*   OPEN THE FTP SERVER.
    CALL FUNCTION ‘FTP_CONNECT‘
      EXPORTING
        user            = ‘username‘   "USER
        password        = l_pw             "PASS WORD
        host            = ‘192.168.1.10‘   
        rfc_destination = ‘SAPFTPA‘        "DEFAULT
      IMPORTING
        handle          = l_handle
      EXCEPTIONS
        not_connected   = 1
        OTHERS          = 2.

    IF sy-subrc = 0.
      EXIT.
    ENDIF.

  ENDDO.

  IF sy-subrc <> 0.
    WRITE :/ sy-datum, sy-uzeit, sy-uname,  ‘CONNECT FTP FAILED!‘.            "MESSAGEG
    STOP.
  ENDIF.


* Change local directory
  CLEAR l_ftpcommand.
  CONCATENATE ‘lcd‘ cons_source INTO l_ftpcommand SEPARATED BY space.
  PERFORM frm_ftp_command USING l_ftpcommand pr_return.
  IF pr_return = ‘1‘.
    WRITE:/ sy-datum, sy-uzeit, sy-uname,  ‘FTP改变本地路径错误!‘.
    STOP.
  ENDIF.

* Change ftp directory
  IF cons_dens <> ‘‘.
    CLEAR l_ftpcommand.
    CONCATENATE ‘cd‘ cons_dens INTO l_ftpcommand SEPARATED BY space.
    PERFORM frm_ftp_command USING l_ftpcommand pr_return.
    IF pr_return = ‘1‘.
      WRITE:/ sy-datum, sy-uzeit, sy-uname,  ‘改变FTP路径出现错误!‘.
      STOP.
    ENDIF.
  ENDIF.

* Change TRANSFER MODE
  CLEAR l_ftpcommand.
*  l_ftpcommand = ‘binary‘.
  l_ftpcommand = ‘ascii‘.
  PERFORM frm_ftp_command USING l_ftpcommand pr_return.
  IF pr_return = ‘1‘.
    WRITE:/ sy-datum, sy-uzeit, sy-uname,  ‘改变FTP传输模式出现错误!‘.
    STOP.
  ENDIF.

* Put File into FTP SERVER
  CLEAR l_ftpcommand.
  CONCATENATE ‘put‘  l_filename INTO l_ftpcommand SEPARATED BY space.
  PERFORM frm_ftp_command USING l_ftpcommand pr_return.
  IF pr_return = ‘1‘.
    WRITE:/ sy-datum, sy-uzeit, sy-uname,  ‘文件传输中出现错误!‘.
    STOP.
  ENDIF.

*  断开FTP服务器
  CALL FUNCTION ‘FTP_DISCONNECT‘
    EXPORTING
      handle = l_handle.

  WRITE:/ sy-datum, sy-uzeit, sy-uname,  ‘文件传输成功!‘.

ENDFORM.                    " FRM_FTP_FILE

************************************************************************
*& FORM FRM_FTP_COMMAND                                                *
************************************************************************
*& FTP Command                                                         *
************************************************************************
FORM frm_ftp_command USING pr_command pr_ret.
  CALL FUNCTION ‘FTP_COMMAND‘
    EXPORTING
      handle                = l_handle
      command               = pr_command
*     COMPRESS              =
*     RFC_DESTINATION       =
*     VERIFY                =
*   IMPORTING
*     FILESIZE              =
*     FILEDATE              =
*     FILETIME              =
    TABLES
      data                  = ig_ftp_result
   EXCEPTIONS
     tcpip_error           = 1
     command_error         = 2
     data_error            = 3
     OTHERS                = 4
            .

* Disconnect
  IF sy-subrc <> 0.
    pr_ret = ‘1‘.
    CALL FUNCTION ‘FTP_DISCONNECT‘
      EXPORTING
        handle = l_handle.
    EXIT.
  ENDIF.

ENDFORM.                    "FRM_FTP_COMMAND

sap ftp 处理,布布扣,bubuko.com

sap ftp 处理

标签:des   blog   http   使用   strong   文件   

原文地址:http://www.cnblogs.com/rainysblog/p/3841974.html

(0)
(0)
   
举报
评论 一句话评论(0
登录后才能评论!
© 2014 mamicode.com 版权所有  联系我们:gaon5@hotmail.com
迷上了代码!