标签：firmware windows directly devices current
经验--安装完esxi主机后，重启不能进入系统
报错提示：在esxi重启之后重启了，屏幕报错： system found unauthorized changes on the firmware,operating system or UEFI devices
press [N] to run the next boot device,or enter directly to BIOS setup if there are no other boot devices installed.
go to bios setup advanced boot and change the current boot device into other secured boot devices
解决的思路：bios默认系统启动类型为windows，要切换到linux系统，因为esxi是linux系统
标签：firmware windows directly devices current
原文地址：http://sanbao.blog.51cto.com/9131723/1692367
