标签：
krb5-server-1.10.3-42.el6.x86_64.rpm
krb5-workstation-1.10.3-42.el6.x86_64.rpm
krb5-devel-1.10.3-42.el6.x86_64.rpm
ypserv-2.19-26.el6_4.2.x86_64.rpm
ypbind-1.20.4-31.el6.x86_64.rpm
yp-tools-2.9-12.el6.x86_64.rpm
192.168.217.111 bs001.zx.nicx.cn
192.168.217.112 bs002.zx.nicx.cn
192.168.217.113 bs003.zx.nicx.cn
/etc/hosts 中需要进行以上配置，localhost需要带上
127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4
::1 localhost localhost.localdomain localhost6 localhost6.localdomain6
注：正文中以bs00x代表bs00x.zx.nicx.cn机器
|
序号 |
IP |
HOST |
NIS |
KDC |
AppServer |
Client |
|
1 |
192.168.217.111 |
bs001.zx.nicx.cn |
TRUE |
TRUE |
||
|
2 |
192.168.217.112 |
bs002.zx.nicx.cn |
TRUE |
TRUE |
||
|
3 |
192.168.217.113 |
bs003.zx.nicx.cn |
TRUE |
TRUE |
集群机器时间需要保持一致
bs001为NIS服务器，NIS域为ZX.NICX.CN
bs001上执行如下操作：
yum -y install ypserv
NIS依赖rpc协议，需要启动portmap服务
service portmap restart(前提：cp /etc/init.d/rpcbind /etc/init.d/portmap)
或者 /etc/init.d/rpcbind restart
并且将portmap服务设为开机启动
chkconfig portmap on
用rpcinfo -p localhost 查看是否启动成功和本机所有的rpc服务
也可以rpcinfo -p hostname(IP)查看对应主机的所有rpc服务
配置NIS domain
tail -n 1 /etc/sysconfig/network
NISDOMAIN=ZX.NICX.CN
配置nisdomainname临时生效命令
nisdomainname ZX.NICX.CN
可以用nisdomainname命令查看本机所属的domain
启动ypserv服务
并且设为开机启动
service ypserv restart
chkconfig ypserv on
创建NIS数据库，并且添加对应主机，如下：
[root@bs001 ~]# /usr/lib/yp/ypinit -m
At this point, we have to construct a list of the hosts which will run NIS
servers. bs001.zx.nicx.cn is in the list of NIS server hosts. Please continue to add
the names for the other hosts, one per line. When you are done with the
list, type a <control D>.
next host to add: bs001.zx.nicx.cn
next host to add:
The current list of NIS servers looks like this:
bs001.zx.nicx.cn
Is this correct? [y/n: y] y
We need a few minutes to build the databases...
Building /var/yp/ZX.NICX.CN/ypservers...
Running /var/yp/Makefile...
gmake[1]: Entering directory `/var/yp/ZX.NICX.CN‘
Updating passwd.byname...
Updating passwd.byuid...
Updating group.byname...
Updating group.bygid...
Updating hosts.byname...
Updating hosts.byaddr...
Updating rpc.byname...
Updating rpc.bynumber...
Updating services.byname...
Updating services.byservicename...
Updating netid.byname...
Updating protocols.bynumber...
Updating protocols.byname...
Updating mail.aliases...
gmake[1]: Leaving directory `/var/yp/ZX.NICX.CN‘
bs001.zx.nicx.cn has been set up as a NIS master server.
Now you can run ypinit -s bs001.zx.nicx.cn on all slave server.
数据库的位置在/var/yp/ ZX.NICX.CN目录下
bs002上执行如下操作
yum -y yp-tools
启动ypbind服务
/etc/init.d/ypbind start
验证NIS服务器上的账户密码
ypcat -d ZX.NICX.CN -h bs001.zx.nicx.cn passwd
[root@bs002 ~]# ypcat -d ZX.NICX.CN -h bs001.zx.nicx.cn passwd
baoshan:$1$x2LXJfgm$pyfEXYFxY9FkUfrfbNG6f0:500:500:baoshan:/home/baoshan:/bin/bash
当然也可以验证hosts、group等信息
bs001上执行如下操作：
例如建立一个账户zzh
useradd zzh
passwd zzh
[root@bs001 ~]# make -C /var/yp/ === cd /var/yp 然后 make
make: Entering directory `/var/yp‘
gmake[1]: Entering directory `/var/yp/ZX.NICX.CN‘
Updating passwd.byname...
Updating passwd.byuid...
Updating group.byname...
Updating group.bygid...
Updating netid.byname...
gmake[1]: Leaving directory `/var/yp/ZX.NICX.CN‘
make: Leaving directory `/var/yp‘
bs002上执行如下操作：
ypcat -d ZX.NICX.CN -h bs001.zx.nicx.cn passwd
[root@bs002 ~]# ypcat -d ZX.NICX.CN -h bs001.zx.nicx.cn passwd
zzh:$1$g8GlVSWY$rOFvRr0eHpQuQbdqXUCwH0:501:502::/home/zzh:/bin/bash
baoshan:$1$x2LXJfgm$pyfEXYFxY9FkUfrfbNG6f0:500:500:baoshan:/home/baoshan:/bin/bash
进行进一步简单化：
设置/etc/yp.conf
增加domain ZX.NICX.CN server bs001.zx.nicx.cn
[root@bs002 ~]# grep ^domain /etc/yp.conf
domain ZX.NICX.CN server bs001.zx.nicx.cn
执行/etc/init.d/ypbind restart
然后执行ycat passwd
[root@bs002 ~]# /etc/init.d/ypbind start
Starting NIS service: [ OK ]
Binding NIS service: [ OK ]
[root@bs002 ~]# ypcat passwd
zzh:$1$g8GlVSWY$rOFvRr0eHpQuQbdqXUCwH0:501:502::/home/zzh:/bin/bash
baoshan:$1$x2LXJfgm$pyfEXYFxY9FkUfrfbNG6f0:500:500:baoshan:/home/baoshan:/bin/bash
bs001上执行如下操作：
创建允许访问NIS服务器的主机列表，不出现在里面的不能访问NIS服务器。
cat /var/yp/securenets
先写掩码，再写IP或者网段，写法如下
255.255.255.255 192.168.217.111 只允许111机器访问NIS服务器
255.255.255.255 192.168.217.112 只允许112机器访问NIS服务器
255.255.255.255 192.168.217.113 只允许113机器访问NIS服务器
255.255.255.0 192.168.217.0 允许192.168.217.0网段的机器访问NIS服务器
重启生效 service ypserv restart
若/var/yp/securenets 不存在，则允许所有主机访问NIS服务器。
注：以上所有在bs002上执行的操作，均可以在bs001、bs002、bs003
集群机器时间需要保持一致
bs002上执行如下操作：
yum -y install krb5-server krb5-workstation
Kerberos配置文件1
cat /etc/krb5.conf
[libdefaults]
default_realm = ZX.NICX.CN #默认的领域
dns_lookup_realm = false
dns_lookup_kdc = false
ticket_lifetime = 24h
forwardable = yes
[realms]
ZX.NICX.CN = {
kdc = bs002.zx.nicx.cn:88 #Kerberos服务器
admin_server = bs002.zx.nicx.cn:749 #管理主机
}
[logging]
default = FILE:/var/log/krb5libs.log
kdc = FILE:/var/log/krb5kdc.log
admin_server = FILE:/var/log/kadmind.log
[domain_realm] #kerberos members
bs002.zx.nicx.cn = ZX.NICX.CN
bs003.zx.nicx.cn = ZX.NICX.CN
.zx.nicx.cn = ZX.NICX.CN
[appdefaults]
pam = {
debug = false
ticket_lifetime = 36000
renew_lifetime = 36000
forwardable = true
krb4_convert = false
validate = true #add
}
将/etc/krb5.conf传输到所有的客户端服务器。
scp /etc/krb5.conf bs001.zx.nicx.cn:/etc
scp /etc/krb5.conf bs003.zx.nicx.cn:/etc
Kerberos配置文件2
cat /var/kerberos/krb5kdc/kdc.conf
[kdcdefaults]
kdc_ports = 88
kdc_tcp_ports = 88
[realms]
EXAMPLE.COM = {
master_key_type = aes256-cts
default_principal_flags = +preauth #add
acl_file = /var/kerberos/krb5kdc/kadm5.acl
dict_file = /usr/share/dict/words
admin_keytab = /var/kerberos/krb5kdc/kadm5.keytab
supported_enctypes = aes256-cts:normal aes128-cts:normal des3-hmac-sha1:normal arcfour-hmac:normal des-hmac-sha1:normal des-cbc-md5:normal des-cbc-crc:normal
}
Kerberos配置文件3
cat /var/kerberos/krb5kdc/kadm5.acl
*/admin@ZX.NICX.CN * #管理员
生成Kerberos数据库
kdb5_util create -r ZX.NICX.CN -s
Loading random data
Initializing database ‘/var/kerberos/krb5kdc/principal‘ for realm ‘ZX.NICX.CN‘,
master key name ‘K/M@ZX.NICX.CN‘
You will be prompted for the database Master Password.
It is important that you NOT FORGET this password.
Enter KDC database master key:
Re-enter KDC database master key to verify:
启动Kerberos服务
[root@bs002 krb5kdc]# service krb5kdc start
Starting Kerberos 5 KDC: [ OK ]
[root@bs002 krb5kdc]# service kadmin start
Starting Kerberos 5 Admin Server: [ OK ]
端口分别为88和749
上述两个服务设置为开机启动。
chkconfig krb5kdc on
chkconfig kadmin on
之后执行kadmin.local命令进入Kerberos数据库
[root@bs002 ~]# kadmin.local
Authenticating as principal baoshan/admin@ZX.NICX.CN with password.
kadmin.local: listprincs
K/M@ZX.NICX.CN
kadmin/admin@ZX.NICX.CN
kadmin/bs002.zx.nicx.cn@ZX.NICX.CN
kadmin/changepw@ZX.NICX.CN
krbtgt/ZX.NICX.CN@ZX.NICX.CN
kadmin.local:
增加一个principle：
kadmin.local: addprinc root/admin@ZX.NICX.CN
WARNING: no policy specified for root/admin@ZX.NICX.CN; defaulting to no policy
Enter password for principal "root/admin@ZX.NICX.CN":
Re-enter password for principal "root/admin@ZX.NICX.CN":
Principal "root/admin@ZX.NICX.CN" created.
之后listprincs
K/M@ZX.NICX.CN
kadmin/bs002.zx.nicx.cn@ZX.NICX.CN
kadmin/changepw@ZX.NICX.CN
krbtgt/ZX.NICX.CN@ZX.NICX.CN
root/admin@ZX.NICX.CN
注：删除账号命令delprinc root/admin@ZX.NICX.CN
bs003上执行如下操作：
kadmin -p root/admin
[root@bs002 ~]# kadmin -p root/admin
Authenticating as principal root/admin with password.
Password for root/admin@ZX.NICX.CN:
kadmin: listprincs
K/M@ZX.NICX.CN
kadmin/admin@ZX.NICX.CN
kadmin/bs002.zx.nicx.cn@ZX.NICX.CN
kadmin/changepw@ZX.NICX.CN
krbtgt/ZX.NICX.CN@ZX.NICX.CN
root/admin@ZX.NICX.CN
凡是通过Kerberos验证的都叫AppServer
ftp server ftp/hostname@BS001.ZX.NICX.CN
sshd host/hostname@BS001.ZX.NICX.CN
telnet host/hostname@BS001.ZX.NICX.CN
nfs nfs/hostname@BS001.ZX.NICX.CN
bs002上执行如下操作：
服务principle没有密码，用randkey，将密码写入到/etc/krb5.keytab文件中
kadmin.local: addprinc -randkey host/bs002.zx.nicx.cn@ZX.NICX.CN
WARNING: no policy specified for host/bs002.zx.nicx.cn@ZX.NICX.CN; defaulting to no policy
Principal "host/bs002.zx.nicx.cn@ZX.NICX.CN" created.
kadmin.local: listprincs
K/M@ZX.NICX.CN
host/bs002.zx.nicx.cn@ZX.NICX.CN
kadmin/admin@ZX.NICX.CN
kadmin/bs002.zx.nicx.cn@ZX.NICX.CN
kadmin/changepw@ZX.NICX.CN
krbtgt/ZX.NICX.CN@ZX.NICX.CN
root/admin@ZX.NICX.CN
kadmin.local: ktadd -k /etc/krb5.keytab host/bs002.zx.nicx.cn@ZX.NICX.CN
Entry for principal host/bs002.zx.nicx.cn@ZX.NICX.CN with kvno 2, encryption type aes256-cts-hmac-sha1-96 added to keytab WRFILE:/etc/krb5.keytab.
Entry for principal host/bs002.zx.nicx.cn@ZX.NICX.CN with kvno 2, encryption type aes128-cts-hmac-sha1-96 added to keytab WRFILE:/etc/krb5.keytab.
Entry for principal host/bs002.zx.nicx.cn@ZX.NICX.CN with kvno 2, encryption type des3-cbc-sha1 added to keytab WRFILE:/etc/krb5.keytab.
Entry for principal host/bs002.zx.nicx.cn@ZX.NICX.CN with kvno 2, encryption type arcfour-hmac added to keytab WRFILE:/etc/krb5.keytab.
Entry for principal host/bs002.zx.nicx.cn@ZX.NICX.CN with kvno 2, encryption type des-hmac-sha1 added to keytab WRFILE:/etc/krb5.keytab.
Entry for principal host/bs002.zx.nicx.cn@ZX.NICX.CN with kvno 2, encryption type des-cbc-md5 added to keytab WRFILE:/etc/krb5.keytab.
kadmin.local: addprinc zzh@ZX.NICX.CN
WARNING: no policy specified for zzh@ZX.NICX.CN; defaulting to no policy
Enter password for principal "zzh@ZX.NICX.CN":
Re-enter password for principal "zzh@ZX.NICX.CN":
Principal "zzh@ZX.NICX.CN" created.
kadmin.local: quit
[root@bs002 ~]# restorecon /etc/krb5.keytab
[root@bs002 ~]# ls -Zl /etc/krb5.keytab
-rw-------. 1 unconfined_u:object_r:krb5_keytab_t:s0 root root 436 Sep 23 07:05 /etc/krb5.keytab
bs003上执行如下操作：
[root@bs003 ~]# kadmin -p root/admin
Authenticating as principal root/admin with password.
Password for root/admin@ZX.NICX.CN:
kadmin: listprincs
K/M@ZX.NICX.CN
host/bs002.zx.nicx.cn@ZX.NICX.CN
kadmin/admin@ZX.NICX.CN
kadmin/bs002.zx.nicx.cn@ZX.NICX.CN
kadmin/changepw@ZX.NICX.CN
krbtgt/ZX.NICX.CN@ZX.NICX.CN
root/admin@ZX.NICX.CN
zzh@ZX.NICX.CN
kadmin: addprinc -randkey host/bs003.zx.nicx.cn@ZX.NICX.CN
WARNING: no policy specified for host/bs003.zx.nicx.cn@ZX.NICX.CN; defaulting to no policy
Principal "host/bs003.zx.nicx.cn@ZX.NICX.CN" created.
kadmin: listprincs
K/M@ZX.NICX.CN
host/bs002.zx.nicx.cn@ZX.NICX.CN
host/bs003.zx.nicx.cn@ZX.NICX.CN
kadmin/admin@ZX.NICX.CN
kadmin/bs002.zx.nicx.cn@ZX.NICX.CN
kadmin/changepw@ZX.NICX.CN
krbtgt/ZX.NICX.CN@ZX.NICX.CN
root/admin@ZX.NICX.CN
zzh@ZX.NICX.CN
kadmin: ktadd -k /etc/krb5.keytab host/bs003.zx.nicx.cn@ZX.NICX.CN
Entry for principal host/bs003.zx.nicx.cn@ZX.NICX.CN with kvno 2, encryption type aes256-cts-hmac-sha1-96 added to keytab WRFILE:/etc/krb5.keytab.
Entry for principal host/bs003.zx.nicx.cn@ZX.NICX.CN with kvno 2, encryption type aes128-cts-hmac-sha1-96 added to keytab WRFILE:/etc/krb5.keytab.
Entry for principal host/bs003.zx.nicx.cn@ZX.NICX.CN with kvno 2, encryption type des3-cbc-sha1 added to keytab WRFILE:/etc/krb5.keytab.
Entry for principal host/bs003.zx.nicx.cn@ZX.NICX.CN with kvno 2, encryption type arcfour-hmac added to keytab WRFILE:/etc/krb5.keytab.
Entry for principal host/bs003.zx.nicx.cn@ZX.NICX.CN with kvno 2, encryption type des-hmac-sha1 added to keytab WRFILE:/etc/krb5.keytab.
Entry for principal host/bs003.zx.nicx.cn@ZX.NICX.CN with kvno 2, encryption type des-cbc-md5 added to keytab WRFILE:/etc/krb5.keytab.
kadmin: quit
启动bs001和bs002上的sshd服务
bs003上执行如下操作：
[root@bs003 ~]# kinit zzh
Password for zzh@ZX.NICX.CN:
[root@bs003 ~]# klist
Ticket cache: FILE:/tmp/krb5cc_0
Default principal: zzh@ZX.NICX.CN
Valid starting Expires Service principal
09/23/15 07:12:54 09/24/15 07:12:52 krbtgt/ZX.NICX.CN@ZX.NICX.CN
使用zzh账户登录bs002.zx.nicx.cn机器，不用输入密码
[root@bs003 ~]# ssh zzh@bs002.zx.nicx.cn
Could not chdir to home directory /home/zzh: No such file or directory
-bash-4.1$ hostname
bs002.zx.nicx.cn
将key毁掉，然后用zzh重新连接bs002.zx.nicx.cn
[root@bs003 ~]# kdestroy
[root@bs003 ~]# klist
klist: No credentials cache found (ticket cache FILE:/tmp/krb5cc_0)
[root@bs003 ~]# ssh zzh@bs002.zx.nicx.cn
zzh@bs002.zx.nicx.cn‘s password: 此处需要输入密码
配置一下ssh服务器，实现互相登录不用输入密码。
bs003.zx.nicx.cn
man ssh_config
vim /etc/ssh/ssh_config
增加 GSSAPIDelegateCredentials yes
注：上述中在bs003上的操作，可以完全部署在bs001机器上。
KDC服务端和客户端需要配置一致。
cat /etc/krb5.conf
[libdefaults]
default_realm = ZX.NICX.CN
dns_lookup_realm = false
dns_lookup_kdc = false
ticket_lifetime = 24h
forwardable = yes
[realms]
ZX.NICX.CN = {
kdc = bs002.zx.nicx.cn:88
admin_server = bs002.zx.nicx.cn:749
}
[logging]
default = FILE:/var/log/krb5libs.log
kdc = FILE:/var/log/krb5kdc.log
admin_server = FILE:/var/log/kadmind.log
[domain_realm]
bs002.zx.nicx.cn = ZX.NICX.CN
bs003.zx.nicx.cn = ZX.NICX.CN
.zx.nicx.cn = BS001.ZX.NICX.CN
[appdefaults]
pam = {
debug = false
ticket_lifetime = 36000
renew_lifetime = 36000
forwardable = true
krb4_convert = false
validate = true
}
KDC服务端配置
cat /var/kerberos/krb5kdc/kdc.conf
[kdcdefaults]
kdc_ports = 88
kdc_tcp_ports = 88
[realms]
EXAMPLE.COM = {
master_key_type = aes256-cts
default_principal_flags = +preauth
acl_file = /var/kerberos/krb5kdc/kadm5.acl
dict_file = /usr/share/dict/words
admin_keytab = /var/kerberos/krb5kdc/kadm5.keytab
supported_enctypes = aes256-cts:normal aes128-cts:normal des3-hmac-sha1:normal arcfour-hmac:normal des-hmac-sha1:normal des-cbc-md5:normal des-cbc-crc:normal
}
KDC服务端配置
cat /var/kerberos/krb5kdc/kadm5.acl
*/admin@ZX.NICX.CN *
标签：
原文地址：http://www.cnblogs.com/zhzhang/p/4834213.html
