码迷,mamicode.com
首页 > 其他好文 > 详细

redis+Keepalived实现Redis高可用性

时间:2015-10-13 10:52:09      阅读:265      评论:0      收藏:0      [点我收藏+]

标签:

目前,Redis还没有一个类似于MySQL Proxy或Oracle RAC的官方HA方案。
Redis作者有一个名为Redis Sentinel的计划(http://redis.io/topics/sentinel),据称将会有监控,报警和自动故障转移三大功能,非常不错。但可惜的是短期内恐怕还不能开发完成。
官方的redis集群方案还在开发阶段,3.0.0beta版本已经支持redis cluster功能。
因此,如何在出现故障时自动转移是一个需要解决的问题。
通过对网上一些资料的搜索,有建议采用HAProxy或Keepalived来实现的,事实上如果是做Failover而非负载均衡的话,Keepalived的效率肯定是超过HAProxy的,所以我决定采用Keepalived的方案。

环境介绍:
Master: 10.6.1.143
Slave: 10.6.1.144
Virtural IP Address (VIP): 10.6.1.200

设计思路:
当 Master 与 Slave 均运作正常时, Master负责服务,Slave负责Standby;
当 Master 挂掉,Slave 正常时, Slave接管服务,同时关闭主从复制功能;
当 Master 恢复正常,则从Slave同步数据,同步数据之后关闭主从复制功能,恢复Master身份,于此同时Slave等待Master同步数据完成之后,恢复Slave身份。
然后依次循环。

需要注意的是,这样做需要在Master与Slave上都开启本地化策略,否则在互相自动切换的过程中,未开启本地化的一方会将另一方的数据清空,造成数据完全丢失。

下面,是具体的实施步骤:
在Master和Slave上安装Keepalived
$ sudo apt-get install keepalived

首先,在Master上创建如下配置文件:

$ sudo vim /etc/keepalived/keepalived.conf
vrrp_script chk_redis { 
                script "/etc/keepalived/scripts/redis_check.sh"   ###监控脚本 
                interval 2                                        ###监控时间 
} 
vrrp_instance VI_1 { 
        state MASTER                            ###设置为MASTER
        interface eth0                          ###监控网卡    
        virtual_router_id 51
        priority 101                            ###权重值
        authentication { 
                     auth_type PASS             ###加密 
                     auth_pass redis            ###密码 
        } 
        track_script { 
                chk_redis                       ###执行上面定义的chk_redis
        } 
        virtual_ipaddress { 
             10.6.1.200                         ###VIP 
        }
        notify_master /etc/keepalived/scripts/redis_master.sh
        notify_backup /etc/keepalived/scripts/redis_backup.sh
        notify_fault  /etc/keepalived/scripts/redis_fault.sh
        notify_stop   /etc/keepalived/scripts/redis_stop.sh 
}

然后,在Slave上创建如下配置文件:

$ sudo vim /etc/keepalived/keepalived.conf
vrrp_script chk_redis { 
                script "/etc/keepalived/scripts/redis_check.sh"   ###监控脚本 
                interval 2                                        ###监控时间 
} 
vrrp_instance VI_1 { 
        state BACKUP                                ###设置为BACKUP 
        interface eth0                              ###监控网卡
        virtual_router_id 51 
        priority 100                                ###比MASTRE权重值低 
        authentication { 
                     auth_type PASS 
                     auth_pass redis                ###密码与MASTRE相同
        } 
        track_script { 
                chk_redis                       ###执行上面定义的chk_redis
        } 
        virtual_ipaddress { 
             10.6.1.200                         ###VIP 
        } 
        notify_master /etc/keepalived/scripts/redis_master.sh
        notify_backup /etc/keepalived/scripts/redis_backup.sh
        notify_fault  /etc/keepalived/scripts/redis_fault.sh
        notify_stop   /etc/keepalived/scripts/redis_stop.sh 
}

在Master和Slave上创建监控Redis的脚本

$ sudo mkdir /etc/keepalived/scripts
$ sudo vim /etc/keepalived/scripts/redis_check.sh
#!/bin/bash
 
ALIVE=`/opt/redis/bin/redis-cli PING`
if [ "$ALIVE" == "PONG" ]; then
  echo $ALIVE
  exit 0
else
  echo $ALIVE
  exit 1
fi

编写以下负责运作的关键脚本:
notify_master /etc/keepalived/scripts/redis_master.sh
notify_backup /etc/keepalived/scripts/redis_backup.sh
notify_fault /etc/keepalived/scripts/redis_fault.sh
notify_stop /etc/keepalived/scripts/redis_stop.sh

因为Keepalived在转换状态时会依照状态来呼叫:
当进入Master状态时会呼叫notify_master
当进入Backup状态时会呼叫notify_backup
当发现异常情况时进入Fault状态呼叫notify_fault
当Keepalived程序终止时则呼叫notify_stop

首先,在Redis Master上创建notity_master与notify_backup脚本:

$ sudo vim /etc/keepalived/scripts/redis_master.sh
#!/bin/bash
 
REDISCLI="/opt/redis/bin/redis-cli"
LOGFILE="/var/log/keepalived-redis-state.log"
 
echo "[master]" >> $LOGFILE
date >> $LOGFILE
echo "Being master...." >> $LOGFILE 2>&1
 
echo "Run SLAVEOF cmd ..." >> $LOGFILE
$REDISCLI SLAVEOF 10.6.1.144 6379 >> $LOGFILE  2>&1
sleep 10 #延迟10秒以后待数据同步完成后再取消同步状态
 
echo "Run SLAVEOF NO ONE cmd ..." >> $LOGFILE
$REDISCLI SLAVEOF NO ONE >> $LOGFILE 2>&1

$ sudo vim /etc/keepalived/scripts/redis_backup.sh
#!/bin/bash
 
REDISCLI="/opt/redis/bin/redis-cli"
LOGFILE="/var/log/keepalived-redis-state.log"
 
echo "[backup]" >> $LOGFILE
date >> $LOGFILE
echo "Being slave...." >> $LOGFILE 2>&1
 
sleep 15 #延迟15秒待数据被对方同步完成之后再切换主从角色
echo "Run SLAVEOF cmd ..." >> $LOGFILE
$REDISCLI SLAVEOF 10.6.1.144 6379 >> $LOGFILE  2>&1

接着,在Redis Slave上创建notity_master与notify_backup脚本:

$ sudo vim /etc/keepalived/scripts/redis_master.sh
#!/bin/bash
 
REDISCLI="/opt/redis/bin/redis-cli"
LOGFILE="/var/log/keepalived-redis-state.log"
 
echo "[master]" >> $LOGFILE
date >> $LOGFILE
echo "Being master...." >> $LOGFILE 2>&1
 
echo "Run SLAVEOF cmd ..." >> $LOGFILE
$REDISCLI SLAVEOF 10.6.1.143 6379 >> $LOGFILE  2>&1
sleep 10 #延迟10秒以后待数据同步完成后再取消同步状态
 
echo "Run SLAVEOF NO ONE cmd ..." >> $LOGFILE
$REDISCLI SLAVEOF NO ONE >> $LOGFILE 2>&1

$ sudo vim /etc/keepalived/scripts/redis_backup.sh
#!/bin/bash
 
REDISCLI="/opt/redis/bin/redis-cli"
LOGFILE="/var/log/keepalived-redis-state.log"
 
echo "[backup]" >> $LOGFILE
date >> $LOGFILE
echo "Being slave...." >> $LOGFILE 2>&1
 
sleep 15 #延迟15秒待数据被对方同步完成之后再切换主从角色
echo "Run SLAVEOF cmd ..." >> $LOGFILE
$REDISCLI SLAVEOF 10.6.1.144 6379 >> $LOGFILE  2>&1

接着,在Redis Slave上创建notity_master与notify_backup脚本:

$ sudo vim /etc/keepalived/scripts/redis_master.sh
#!/bin/bash
 
REDISCLI="/opt/redis/bin/redis-cli"
LOGFILE="/var/log/keepalived-redis-state.log"
 
echo "[master]" >> $LOGFILE
date >> $LOGFILE
echo "Being master...." >> $LOGFILE 2>&1
 
echo "Run SLAVEOF cmd ..." >> $LOGFILE
$REDISCLI SLAVEOF 10.6.1.143 6379 >> $LOGFILE  2>&1
sleep 10 #延迟10秒以后待数据同步完成后再取消同步状态
 
echo "Run SLAVEOF NO ONE cmd ..." >> $LOGFILE
$REDISCLI SLAVEOF NO ONE >> $LOGFILE 2>&1

$ sudo vim /etc/keepalived/scripts/redis_backup.sh
#!/bin/bash
 
REDISCLI="/opt/redis/bin/redis-cli"
LOGFILE="/var/log/keepalived-redis-state.log"
 
echo "[backup]" >> $LOGFILE
date >> $LOGFILE
echo "Being slave...." >> $LOGFILE 2>&1
 
sleep 15 #延迟15秒待数据被对方同步完成之后再切换主从角色
echo "Run SLAVEOF cmd ..." >> $LOGFILE
$REDISCLI SLAVEOF 10.6.1.144 6379 >> $LOGFILE  2>&1

接着,在Redis Slave上创建notity_master与notify_backup脚本:

$ sudo vim /etc/keepalived/scripts/redis_master.sh
#!/bin/bash
 
REDISCLI="/opt/redis/bin/redis-cli"
LOGFILE="/var/log/keepalived-redis-state.log"
 
echo "[master]" >> $LOGFILE
date >> $LOGFILE
echo "Being master...." >> $LOGFILE 2>&1
 
echo "Run SLAVEOF cmd ..." >> $LOGFILE
$REDISCLI SLAVEOF 10.6.1.143 6379 >> $LOGFILE  2>&1
sleep 10 #延迟10秒以后待数据同步完成后再取消同步状态
 
echo "Run SLAVEOF NO ONE cmd ..." >> $LOGFILE
$REDISCLI SLAVEOF NO ONE >> $LOGFILE 2>&1

$ sudo vim /etc/keepalived/scripts/redis_backup.sh
#!/bin/bash

REDISCLI="/opt/redis/bin/redis-cli"
LOGFILE="/var/log/keepalived-redis-state.log"

echo "[backup]" >> $LOGFILE
date >> $LOGFILE
echo "Being slave...." >> $LOGFILE 2>&1

sleep 15 #延迟15秒待数据被对方同步完成之后再切换主从角色
echo "Run SLAVEOF cmd ..." >> $LOGFILE
$REDISCLI SLAVEOF 10.6.1.143 6379 >> $LOGFILE  2>&1

然后在Master与Slave创建如下相同的脚本:

$ sudo vim /etc/keepalived/scripts/redis_fault.sh
#!/bin/bash
 
LOGFILE=/var/log/keepalived-redis-state.log
 
echo "[fault]" >> $LOGFILE
date >> $LOGFILE

$ sudo vim /etc/keepalived/scripts/redis_stop.sh
#!/bin/bash
 
LOGFILE=/var/log/keepalived-redis-state.log
 
echo "[stop]" >> $LOGFILE
date >> $LOGFILE

给脚本都加上可执行权限:
$ sudo chmod +x /etc/keepalived/scripts/*.sh

脚本创建完成以后,我们开始按照如下流程进行测试:
1.启动Master上的Redis
$ sudo /etc/init.d/redis start

2.启动Slave上的Redis
$ sudo /etc/init.d/redis start

3.启动Master上的Keepalived
$ sudo /etc/init.d/keepalived start

4.启动Slave上的Keepalived
$ sudo /etc/init.d/keepalived start

5.尝试通过VIP连接Redis:
$ redis-cli -h 10.6.1.200 INFO

连接成功,Slave也连接上来了。
role:master
slave0:10.6.1.144,6379,online

6.尝试插入一些数据:
$ redis-cli -h 10.6.1.200 SET Hello Redis
OK

从VIP读取数据
$ redis-cli -h 10.6.1.200 GET Hello
"Redis"

从Master读取数据
$ redis-cli -h 10.6.1.143 GET Hello
"Redis"

从Slave读取数据
$ redis-cli -h 10.6.1.144 GET Hello
"Redis"

下面,模拟故障产生:
将Master上的Redis进程杀死:
$ sudo killall -9 redis-server

查看Master上的Keepalived日志
$ tailf /var/log/keepalived-redis-state.log
[fault]
Thu Sep 27 08:29:01 CST 2012

同时Slave上的日志显示:
$ tailf /var/log/keepalived-redis-state.log
[master]
Fri Sep 28 14:14:09 CST 2012
Being master....
Run SLAVEOF cmd ...
OK
Run SLAVEOF NO ONE cmd ...
OK

然后我们可以发现,Slave已经接管服务,并且担任Master的角色了。
$ redis-cli -h 10.6.1.200 INFO
$ redis-cli -h 10.6.1.144 INFO
role:master

然后我们恢复Master的Redis进程
$ sudo /etc/init.d/redis start

查看Master上的Keepalived日志
$ tailf /var/log/keepalived-redis-state.log
[master]
Thu Sep 27 08:31:33 CST 2012
Being master....
Run SLAVEOF cmd ...
OK
Run SLAVEOF NO ONE cmd ...
OK

同时Slave上的日志显示:
$ tailf /var/log/keepalived-redis-state.log
[backup]
Fri Sep 28 14:16:37 CST 2012
Being slave....
Run SLAVEOF cmd ...
OK

可以发现目前的Master已经再次恢复了Master的角色,故障切换以及自动恢复都成功了。
转自:http://heylinux.com/archives/1942.html


redis+Keepalived实现Redis高可用性

标签:

原文地址:http://my.oschina.net/ydsakyclguozi/blog/516167

(0)
(0)
   
举报
评论 一句话评论(0
登录后才能评论!
© 2014 mamicode.com 版权所有  联系我们:gaon5@hotmail.com
迷上了代码!