标签：

Running a Loop

1,run:

Puts the receiver into a permanent loop, during which time it processes data from all attached input sources.

Discussion

If no input sources or timers are attached to the run loop, this method exits immediately; 

otherwise, it runs the receiver in the NSDefaultRunLoopMode by repeatedly invoking runMode:beforeDate:. 

In other words, this method effectively begins an infinite loop that processes data from the run loop’s input sources and timers.

Manually removing all known input sources and timers from the run loop is not a guarantee that the run loop will exit. OS X can install and remove additional input sources as needed to process requests targeted at the receiver’s thread. Those sources could therefore prevent the run loop from exiting.

If you want the run loop to terminate, you shouldn‘t use this method. Instead, use one of the other run methods and also check other arbitrary conditions of your own, in a loop. A simple example would be:

BOOL shouldKeepRunning = YES;        // global
NSRunLoop *theRL = [NSRunLoop currentRunLoop];
while (shouldKeepRunning && [theRL runMode:NSDefaultRunLoopMode beforeDate:[NSDate distantFuture]]);

where shouldKeepRunning is set to NO somewhere else in the program.

2,- runMode:beforeDate:

Runs the loop once, blocking for input in the specified mode until a given date.

Return Value

YES if the run loop ran and processed an input source or if the specified timeout value was reached; otherwise,NO if the run loop could not be started.

Discussion

If no input sources or timers are attached to the run loop, this method exits immediately and returns NO;

 otherwise, it returns after either the first input source is processed or limitDate is reached. (每次只处理一个事件，所以runUntilDate 以及 run 要循环调用此方法）

Manually removing all known input sources and timers from the run loop does not guarantee that the run loop will exit immediately. OS X may install and remove additional input sources as needed to process requests targeted at the receiver’s thread. Those sources could therefore prevent the run loop from exiting.

NOTE

    A timer is not considered an input source and may fire multiple times while waiting for this method to return

3,- runUntilDate:

If no input sources or timers are attached to the run loop, this method exits immediately; 

otherwise, it runs the receiver in the NSDefaultRunLoopMode by repeatedly invoking runMode:beforeDate: until the specified expiration date.

RunLoop 的几个run 方法

标签：

原文地址：http://my.oschina.net/u/255456/blog/522567