安装以下依赖包：
yum install -y gcc gcc-c++ glibc make autoconf openssl openssl-devel lrzsz memcache(可以先安装，操作时就只是检查)
下载以下软件包：
wget ftp://ftp.csx.cam.ac.uk/pub/software/programming/pcre/pcre-8.37.tar.gz##可用yum
wget http://nginx.org/download/nginx-1.9.6.tar.gz
wget http://keepalived.org/software/keepalived-1.2.19.tar.gz
wget http://cn2.php.net/get/php-5.6.15.tar.gz/from/this/mirror
部署Haproxy
[root@linux-node1haproxy]# vim /etc/salt/master
file_roots:
base:
- /srv/salt/base
prod:
- /srv/salt/prod
test:
- /srv/salt/test
[root@linux-node1haproxy]# /etc/init.d/salt-master restart
###修改完配置文件要重启才能生效
[root@linux-node1~]# mkdir /srv/salt/prod/pkg –p ##生产上一些包放在这
[root@linux-node1~]# mkdir /srv/salt/prod/haproxy
[root@linux-node1~]# mkdir /srv/salt/prod/haproxy/files
[root@linux-node1pkg]# vim pkg-init.sls ##安装包的初始化
pkg-init: ##ID
pkg.installed:
- names:
- gcc
- gcc-c++
- glibc
- make
- autoconf
- openssl
- openssl-devel
- pcre-devel ###nginx需要
[root@linux-node1prod]# cp /home/reid/tools/haproxy-1.6.2.tar.gz haproxy/files/
操作方法：第一次先用手动安装一次，然后再用salt来写一次
[root@linux-node1prod]# cp /home/reid/tools/haproxy-1.6.2.tar.gz haproxy/files/
[root@linux-node1prod]# cd haproxy/files/
[root@linux-node1files]# ls
haproxy-1.6.2.tar.gz
[root@linux-node1files]# cp haproxy-1.6.2.tar.gz /usr/local/src/
[root@linux-node1files]# tar zxf haproxy-1.6.2.tar.gz
[root@linux-node1files]# cd haproxy-1.6.2
[root@linux-node1haproxy-1.6.2]# make TARGET=linux26 PREFIX=/usr/local/haproxy && makeinstall PREFIX=/usr/local/haproxy
[root@linux-node1haproxy-1.6.2]# cd examples/
[root@linux-node1examples]# vim haproxy.init
BIN=/usr/local/haproxy/sbin/$BASENAME ##修改脚本路径
[root@linux-node1examples]# cp haproxy.init /srv/salt/prod/haproxy/files/
[root@linux-node1examples]# cd /srv/salt/prod/haproxy/
[root@linux-node1haproxy]# vim install.sls
include: ##先把包include
- pkg.pkg-init
haproxy-install:
file.managed:
- name: /usr/local/src/haproxy-1.6.2.tar.gz
- source: salt://haproxy/files/haproxy-1.6.2.tar.gz ##放包根据file_roots来设
- user: root
- group: root
- mode: 755
cmd.run: ##安装
- name: cd/usr/local/src && tar zxf haproxy-1.6.2.tar.gz &&cdhaproxy-1.6.2 && make TARGET=linux26 PREFIX=/usr/local/haproxy&&make install PREFIX=/usr/local/haproxy
- unless: test -d /usr/local/haproxy ###如果不存在返回false时就执行
- require:
- pkg: pkg-init ##依赖于这些包
- file: haproxy-install
##haproxy-install下有一个文件模块，依赖于这个，一个ID下一个模块只能使用一次
haproxy-init: ##加入开机启动服务
file.managed:
-name: /etc/init.d/haproxy
- source: salt://haproxy/files/haproxy.init
- user: root
- group: root
- mode: 755
- require:
- cmd: haproxy-install ####haproxy-install下面一个cmd的模块，依赖于这个
cmd.run:
-name: chkconfig --add haproxy
- unless: chkconfig --list |grep haproxy
- require:
- file: /etc/init.d/haproxy
net.ipv4.ip_nonlocal_bind: #监听非本地IP ,负载均衡的机器上只有一个IP，所以要修改一个内核参数
sysctl.present:
- value: 1
haproxy-config-dir: ###创建一个目录，放文件到里面
file.directory:
- name: /etc/haproxy
- user: root
- group: root
- mode: 755
监听非本地IP ,负载均衡的机器上只有一个IP，所以要修改一个内核参数
[root@linux-node1~]# cat /proc/sys/net/ipv4/ip_nonlocal_bind
0
状态间关系：
unless:用于检查的命令仅当“unless”选项指向的命令返回false时才执行name指向的命令
require:我依赖某个状态，它执行了我才执行
[root@linux-node1haproxy]# salt ‘linux-node1.*‘ state.sls haproxy.install env=prod ##加env=prod，因为不加默认是找base,生产上不建议用*来执行，这里为了方便用了* ，而且要加test=True做好测试
[root@linux-node1~]# mkdir /srv/salt/prod/cluster
[root@linux-node1~]# mkdir /srv/salt/prod/cluster/files ##把配置放里面
[root@linux-node1~]# cd /srv/salt/prod/cluster/files/
[root@linux-node1files]# vim haproxy-outside.cfg ##外网负载均衡
global
maxconn 100000
chroot /usr/local/haproxy
uid 99
gid 99
daemon
nbproc 1
pidfile /usr/local/haproxy/logs/haproxy.pid
log 127.0.0.1 local3 info
defaults
option http-keep-alive
maxconn 100000
mode http
timeout connect 5000ms
timeout client 50000ms
timeout server 50000ms
listen stats
mode http
bind 0.0.0.0:8888
stats enable
stats uri /haproxy-status
stats auth haproxy:saltstack
frontend frontend_www_example_com
bind10.0.0.11:80
mode http
option httplog
log global
default_backend backend_www_example_com
backend backend_www_example_com
option forwardfor header X-REAL-IP
option httpchk HEAD / HTTP/1.0
balanceroundrobin
server web-node1 10.0.0.7:8080 check inter 2000 rise 30 fall 15
server web-node2 10.0.0.8:8080 check inter 2000 rise 30 fall 15
###生产建议除了负载均衡都监听80，可以用普通用户来起
cluster目录下写haproxy相关的配置，配置文件的管理和服务的管理—》思路先安装---配置---再起
[root@linux-node1cluster]# vim haproxy-outside.sls
include:
- haproxy.install
haproxy-service:
file.managed:
- name: /etc/haproxy/haproxy.cfg
- source:salt://cluster/files/haproxy-outside.cfg
- user: root
- group: root
- mode: 644
service.running: ##启动服务
- name: haproxy
- enable: True ###开机自启动
- reload: True ###不加，配置文件变化了会restart
- require:
- cmd: haproxy-init
- watch: ##监控配置文件的变化
- file: haproxy-service
[root@linux-node1cluster]# vim /srv/salt/base/top.sls
base:
‘*‘:
- init.env_init
prod:
‘linux-node1.example.com‘:
- cluster.haproxy-outside
‘linux-node2.example.com‘:
- cluster.haproxy-outside
[root@linux-node1~]# salt ‘*‘ state.highstate
Apache的监听端口要修改
Listen:8080
/etc/init.d/httpdrestart ###linux-node2上没有安装
[root@linux-node1~]# echo "linux-node1" >>/var/www/html/index.html
[root@linux-node2~]# echo "linux-node2" >>/var/www/html/index.html
http://10.0.0.7:8888/haproxy-status
部署keepalived
[root@linux-node1etc]# mkdir /srv/salt/prod/keepalived/files -p
[root@linux-node1etc]# cp /usr/local/src/keepalived-1.2.19/keepalived/etc/init.d/keepalived.init/srv/salt/prod/keepalived/files/
[root@linux-node1etc]# cp /usr/local/src/keepalived-1.2.19/keepalived/etc/keepalived/keepalived.conf /srv/salt/prod/keepalived/files/
[root@linux-node1etc]# cd /srv/salt/prod/keepalived/files/
[root@linux-node1files]# ls
keepalived.conf keepalived.init
[root@linux-node1files]# vimkeepalived.init ###启动脚本
start(){
echo -n $"Starting $prog: "
daemon /usr/local/keepalived/sbin/keepalived${KEEPALIVED_OPTIONS}
[root@linux-node1files]# cd ..
[root@linux-node1keepalived]# vim install.sls ##安装
include: ##先include要安装的基础包
- pkg.pkg-init
keepalived-install: ##安装
file.managed:
- name:/usr/local/src/keepalived-1.2.19.tar.gz
- source:salt://keepalived/files/keepalived-1.2.19.tar.gz ###存放安装包
- user: root
- group: root
- mode: 755
cmd.run: ###编译
- name: cd/usr/local/src && tar zxf keepalived-1.2.19.tar.gz && cdkeepalived-1.2.19 && ./config
ure --prefix=/usr/local/keepalived --disable-fwmark&& make && make install
- unless: test -d /usr/local/keepalived
- require:
- pkg: pkg-init
- file:keepalived-install
keepalived-init: ###以下是管理配置文件
file.managed:
- name:/etc/init.d/keepalived
- source:salt://keepalived/files/keepalived.init
- user: root
- group: root
- mode: 755
cmd.run: ###设置开机启动
- name: chkconfig--add keepalived
- unless:chkconfig --list | grep keepalived
- require:
- file:keepalived-init
/etc/sysconfig/keepalived:
file.managed:
- source:salt://keepalived/files/keepalived.sysconfig
- user: root
- group: root
- mode: 644
/etc/keepalived:
file.directory:
- user: root
- group: root
- mode: 755
[root@linux-node1sysconfig]# cp /usr/local/keepalived/etc/sysconfig/keepalived/srv/salt/prod/keepalived/files/keepalived.sysconfig
[root@linux-node1sysconfig]# vim keepalived ====》KEEPALIVED_OPTIONS="-D"
[root@linux-node1keepalived]# ll files/
总用量 12
-rw-r--r--1 root root 3562 11月 21 13:33 keepalived.conf
-rwxr-xr-x1 root root 1335 11月 21 13:39 keepalived.init
-rw-r--r--1 root root 667 11月 21 13:59 keepalived.sysconfig
-rw-r--r--1 root root 330164 11月 21 14:26 keepalived-1.2.19.tar.gz
[root@linux-node1keepalived]# salt ‘*‘ state.sls keepalived.install env=prod
[root@linux-node1keepalived]# lsof -i:4505 ###一直保持连
COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODENAME
salt-mast3643 root 12u IPv4 163688 0t0 TCP *:4505 (LISTEN)
salt-mast3643 root 14u IPv4 165569 0t0 TCP linux-node1.example.com:4505->linux-node1.example.com:34412 (ESTABLISHED)
salt-mast3643 root 15u IPv4 164033 0t0 TCP linux-node1.example.com:4505->linux-node2.example.com:54631(ESTABLISHED)
salt-mini3747 root 24u IPv4 165568 0t0 TCP linux-node1.example.com:34412->linux-node1.example.com:4505 (ESTABLISHED)
saltstack可以用写到mysql上看那能机器没有返回来测试，那能不成功
keepalived的引用
[root@linux-node1~]# cd /srv/salt/prod/cluster/files/
[root@linux-node1files]# cat haproxy-outside-keepalived.conf ###keepalived的配置文件
!Configuration File for keepalived
global_defs{
notification_email {
saltstack@example.com
}
notification_email_fromkeepalived@example.com
smtp_server 127.0.0.1
smtp_connect_timeout 30
router_id {{ROUTEID}}
}
vrrp_instancehaproxy_ha {
state {{STATEID}}
interfaceeth0
virtual_router_id 36
priority {{PRIORITYID}}
advert_int 1
authentication{
auth_typePASS
auth_pass 1111
}
virtual_ipaddress {
10.0.0.11
}
}
[root@linux-node1cluster]# ls
files haproxy-outside.sls
[root@linux-node1cluster]# vim haproxy-outside-keepalived.sls
include:
- keepalived.install
keepalived-service:
file.managed:
- name: /etc/keepalived/keepalived.conf
- source:salt://cluster/files/haproxy-outside-keepalived.conf
- user: root
- group: root
- mode: 644
- template: jinja
{% if grains[‘fqdn‘] == ‘linux-node1.example.com‘ %}
- ROUTEID:haproxy_ha
- STATEID: MASTER
- PRIORITYID: 150
{% elifgrains[‘fqdn‘] == ‘linux-node2.example.com‘ %}
- ROUTEID:haproxy_ha
- STATEID: BACKUP
- PRIORITYID: 100
{% endif %}
service.running:
- name: keepalived
- enable: True
- watch:
- file: keepalived-service
[root@linux-node1cluster]# salt ‘*‘ state.sls cluster.haproxy-outside-keepalived env=prodtest=True
[root@linux-node1cluster]# salt ‘*‘ state.sls cluster.haproxy-outside-keepalived env=prod
[root@linux-node1salt]# vim base/top.sls
base:
‘*‘:
- init.env_init
prod:
‘linux-node1.example.com‘:
- cluster.haproxy-outside
- cluster.haproxy-outside-keepalived
‘linux-node2.example.com‘:
- cluster.haproxy-outside
- cluster.haproxy-outside-keepalived
[root@linux-node1prod]# salt ‘*‘ state.highstate
[root@linux-node1prod]# ip add| grep 11
inet 10.0.0.11/32 scope global eth0
[root@linux-node1prod]# /etc/init.d/keepalived stop
[root@linux-node2~]# ip add |grep 11
inet 10.0.0.11/32 scope global eth0
统一用记管理
[root@linux-node1~]# mkdir /srv/salt/prod/user
[root@linux-node1user]# vim www.sls ##web的管理用户
www-user-group:
group.present:
- name: www
- gid: 1000
user.present:
- name: www
- fullname: www
- shell: /sbin/nologin
- uid: 1000
- gid: 1000
[root@linux-node1user]# salt ‘*‘ state.sls user.www env=prod test=True
[root@linux-node1user]# salt ‘*‘ state.sls user.www env=prod
[root@linux-node1user]# vim mysql.sls ###mysql管理用户
mysql-user-group:
group.present:
- name: mysql
- gid: 501
user.present:
- name: mysql
- fullname: mysql
- shell: /sbin/nologin
- uid: 501
- gid: 501
[root@linux-node1user]# salt ‘*‘ state.sls user.mysql env=prod test=True
[root@linux-node1user]# salt ‘*‘ state.sls user.mysql env=prod
部署Nginx
[root@linux-node1~]# tree /srv/salt/prod/nginx/
/srv/salt/prod/nginx/
├── files
│ ├── nginx-1.9.6.tar.gz
│ └── nginx.init ###启动脚本
└── install.sls
[root@linux-node1~]# tree /srv/salt/prod/cluster/
/srv/salt/prod/cluster/
├── files
│ ├── haproxy-outside.cfg
│ ├──haproxy-outside-keepalived.conf
│ └── nginx-web.conf ##配置文件
├── haproxy-outside-keepalived.sls
├── haproxy-outside.sls
└── nginx-web.sls ###管理配置文件
[root@linux-node1~]# cat /srv/salt/prod/nginx/install.sls
include:
- pkg.pkg-init
nginx-install:
file.managed:
- name: /usr/local/src/nginx-1.9.6.tar.gz
- source:salt://nginx/files/nginx-1.9.6.tar.gz
- user: root
- group: root
- mode: 755
cmd.run:
- name: cd/usr/local/src && tar zxf nginx-1.9.6.tar.gz && cd nginx-1.9.6&&./configure --prefix=/usr/local/nginx --user=www --group=www--with-http_ssl_module --with-http_stub_status_module && make&& make install
- unless: test -d/usr/local/nginx
- pkg: pkg-init
- file:nginx-install
nginx-init:
file.managed:
- name:/etc/init.d/nginx
- source:salt://nginx/files/nginx.init
- user: root
- group: root
- mode: 755
- require:
- cmd:nginx-install
cmd.run:
- name: chkconfig--add nginx
- unless:chkconfig --list | grep nginx
- require:
- file:/etc/init.d/nginx
[root@linux-node1~]# cat /srv/salt/prod/cluster/nginx-web.sls
include:
- nginx.install
nginx-service:
file.managed:
- name:/usr/local/nginx/conf/nginx.conf
- source:salt://cluster/files/nginx-web.conf
service.running:
- name: nginx
- enable: True
- reload: True
- require:
- cmd:nginx-init
- watch:
- file:nginx-service
[root@linux-node1~]# cat /srv/salt/base/top.sls
base:
‘*‘:
- init.env_init
prod:
‘linux-node1.example.com‘:
- cluster.haproxy-outside
- cluster.haproxy-outside-keepalived
-cluster.nginx-web
‘linux-node2.example.com‘:
- cluster.haproxy-outside
- cluster.haproxy-outside-keepalived
-cluster.nginx-web
部署PHP
[root@linux-node1~]# tree /srv/salt/prod/php/
/srv/salt/prod/php/
├── files
│ ├── php-5.6.15.tar.gz
│ ├── php-fpm.conf ###修改下启动用户为www
│ └── php.init
└── install.sls
[root@linux-node1~]# tree /srv/salt/prod/cluster/
/srv/salt/prod/cluster/
├── files
│ ├── haproxy-outside.cfg
│ ├──haproxy-outside-keepalived.conf
│ ├── nginx-web.conf
│ └── php.ini
├── haproxy-outside-keepalived.sls
├── haproxy-outside.sls
├── nginx-web.sls
└── php-web.sls
[root@linux-node1~]# cat /srv/salt/prod/php/install.sls
include:
- pkg.pkg-init
php-install:
file.managed:
- name:/usr/local/src/php-5.6.15.tar.gz
- source:salt://php/files/php-5.6.15.tar.gz
- user: root
- group: root
- mode: 755
cmd.run:
- name: cd/usr/local/src/ && tar xf php-5.6.15.tar.gz && cd php-5.6.15&& ./configure --prefix=/usr/local/php --with-mysql --with-jpeg-dir--with-png-dir --with-zlib --enable-xml --with-libxml-dir --with-curl--enable-bcmath --enable-shmop --enable-sysvsem --enable-inline-optimization --enable-mbregex--with-openssl --enable-mbstring --with-gd --enable-gd-native-ttf--enable-sockets --with-xmlrpc --enable-zip --enable-soap --disable-debug--enable-opcache --enable-zip --with-config-file-path=/usr/local/php/etc--enable-fpm --with-fpm-user=nginx --with-fpm-group=nginx && make&& make install
- unless: test -d/usr/local/php
- pkg: pkg-init
- file:php-install
php-conf:
file.managed:
- name:/usr/local/php/etc/php-fpm.conf
- source:salt://php/files/php-fpm.conf ###启动需要的文件
- user: root
- group: root
- mode: 644
- require:
- cmd:php-install
php-init:
file.managed:
- name:/etc/init.d/php
- source:salt://php/files/php.init ###启动脚本
- user: root
- group: root
- mode: 755
- require:
- cmd:php-install
cmd.run:
- name: chkconfig--add php
- unless:chkconfig --list | grep php
- require:
- file:/etc/init.d/php
[root@linux-node1~]# cat /srv/salt/prod/cluster/php-web.sls
include:
- php.install
php-service:
file.managed:
- name:/usr/local/php/etc/php.ini ###配置文件
- source:salt://cluster/files/php.ini
service.running:
- name: php
- enable: True
- reload: True
- require:
- cmd: php-init
- watch:
- file:php-service
[root@linux-node1~]# cat /srv/salt/prod/cluster/files/nginx-web.conf ###需要修改，前期部署可以一下实现，可以根据不同的站点对业务配置管理
worker_processes 1;
events{
worker_connections 1024;
}
http{
include mime.types;
default_type application/octet-stream;
sendfile on;
keepalive_timeout 65;
server {
listen 8081;
server_name www.reid.org;
root html/blog;
index index.php index.html index.htm;
location ~ .*\.(php|php5)?$ ###支持PHP
{
fastcgi_pass 127.0.0.1:9000;
fastcgi_index index.php;
include fastcgi.conf;
}
error_page 500 502 503 504 /50x.html;
location = /50x.html {
root html;
}
}
}
salt‘*‘ state.sls php.install env=prod test=True
salt‘*‘ state.sls php.install env=prod
salt‘*‘ state.higtstate
测试：
部署Memcached
[root@linux-node1~]#tree /srv/salt/prod/memcached/
/srv/salt/prod/memcached/
├── files
│ └── memcached-1.4.13.tar.gz
├── install.sls
├── memcached.sls
└── service.sls
[root@linux-node1~]# mkdir /srv/salt/prod/libevent/files -p
[root@linux-node1~]# mkdir /srv/salt/prod/memcached/files –p
安装libevent
[root@linux-node1~]# vim /srv/salt/prod/libevent/install.sls
libevent-source-install:
file.managed:
- name:/usr/local/src/libevent-1.4.13-stable.tar.gz
- source:salt://libevent/files/libevent-1.4.13-stable.tar.gz
- user: root
- group: root
- mode: 644
cmd.run:
- name: cd /usr/local/src && tarzxf libevent-1.4.13-stable.tar.gz && cd libevent-1.4.13-stable&& ./config
ure--prefix=/usr/local/libevent && make && make install
- unless: test -d /usr/local/libevent
- require:
- file: libevent-source-install
安装memcached
[root@linux-node1~]# vim /srv/salt/prod/memcached/install.sls
include:
- libevent.install
memcached-source-install:
file.managed:
- name: /usr/local/src/memcached-1.4.13.tar.gz
- source:salt://memcached/files/memcached-1.4.13.tar.gz
- user: root
- group: root
- mode: 644
cmd.run:
- name: cd /usr/local/src && tarzxf memcached-1.4.13.tar.gz && cd memcached-1.4.13 &&./configure --prefix
=/usr/local/memcached--enable-64bit --with-libevent=/usr/local/libevent && make &&make install
- unless: test -d /usr/local/memcached
- require:
- cmd: libevent-source-install
- file: memcached-source-install
启动memcached
[root@linux-node1~]# vim /srv/salt/prod/memcached/service.sls
include:
- memcached.install
- user.www
memcached.service:
cmd.run:
- name: /usr/local/memcached/bin/memcached-d -m 128 -p 11211 -c 8096 -u www
- unless: netstat -tnlp|grep 11211
- require:
- cmd: memcached-source-install
- user: www-user-group
在top file上定义
[root@linux-node1~]# vim /srv/salt/base/top.sls
base:
‘*‘:
- init.env_init
prod:
‘linux-node1.example.com‘:
- cluster.haproxy-outside
- cluster.haproxy-outside-keepalived
- cluster.nginx-web
- cluster.php-web
- cluster.mysql
- memcached.service
‘linux-node2.example.com‘:
- cluster.haproxy-outside
- cluster.haproxy-outside-keepalived
- cluster.nginx-web
- cluster.php-web
- cluster.mysql
- memcached.service
[root@linux-node1~]# netstat -ntlp|grep 11211
tcp 0 0 0.0.0.0:11211 0.0.0.0:* LISTEN 9485/memcached
tcp 0 0 :::11211 :::* LISTEN 9485/memcached
[root@linux-node2~]# netstat -ntlp|grep 11211
tcp 0 0 0.0.0.0:11211 0.0.0.0:* LISTEN 5137/memcached
tcp 0 0 :::11211 :::* LISTEN 5137/memcached
PHP Memcache
[root@linux-node1~]# vim /srv/salt/prod/php/php-memcache.sls
memcache-plugin:
file.managed:
- name: /usr/local/src/memcache-2.2.5.tgz
- source: salt://php/files/memcache-2.2.5.tgz
- user: root
- group: root
- mode: 755
cmd.run:
- name: cd /usr/local/src && tarzxf memcache-2.2.5.tgz && cd memcache-2.2.5 &&/usr/local/php/bin/phpize &
&./configure --enable-memcache --with-php-config=/usr/local/php/bin/php-config&& make && make install
- unless: test -f/usr/local/php/lib/php/extensions/*/memcache.so
- require:
- file: memcache-plugin
/usr/local/php/etc/php.ini:
file.append:
- text:
- extension=memcache.so
部署MySQL（生产上不建议主从用salt部署）
[root@linux-node1~]# tree /srv/salt/prod/mysql/
/srv/salt/prod/mysql/
├── files
│ ├── my-medium.cnf ##配置文件
│ ├── mysql-5.1.72.tar.gz ##安装包
│ └── mysql.server ###启动脚本
└── install.sls ###安装文件
[root@linux-node1~]# cat /srv/salt/prod/mysql/install.sls
include:
- pkg.pkg-init
- user.mysql
mysql-install:
file.managed:
- name: /usr/local/src/mysql-5.1.72.tar.gz
- source:salt://mysql/files/mysql-5.1.72.tar.gz
- user: root
- group: root
- mode: 755
cmd.run:
- name: cd /usr/local/src && tar xfmysql-5.1.72.tar.gz && cd mysql-5.1.72 && ./configure--prefix=/usr/local/mysql--with-unix-socket-path=/usr/local/mysql/tmp/mysql.sock --localstatedir=/usr/local/mysql/data--enable-assembler --enable-thread-safe-client --with-mysqld-user=mysql--with-big-tables --without-debug --with-pthread --enable-assembler--with-extra-charsets=complex --with-readline --with-ssl --with-embedded-server--enable-local-infile --with-plugins=partition,innobase--with-mysqld-ldflags=-all-static --with-client-ldflags=-all-static &&make && make install
- unless: test -d /usr/local/mysql
- require:
- file: mysql-install
- pkg: pkg-init
mysql-data-dir:
file.directory:
- name: /usr/local/mysql/data
- user: mysql
- group: mysql
- require:
- user: mysql
cmd.run:
- name: cd /usr/local/mysql/bin/ &&./mysql_install_db --basedir=/usr/local/mysql --datadir=/usr/local/mysql/data/--user=mysql
- require:
- cmd: mysql-install
mysql-config-file:
file.managed:
- name: /etc/my.cnf
- source: salt://mysql/files/my-medium.cnf
- user: root
- group: root
- mode: 644
mysql-init:
file.managed:
- name: /etc/init.d/mysqld
- source: salt://mysql/files/mysql.server
- user: root
- group: root
- mode: 755
- require:
- cmd: mysql-install
- file: mysql-config-file
cmd.run:
- name: chkconfig --add mysqld
- unless: chkconfig --list | grep mysqld
- require:
- file: /etc/init.d/mysqld
service.running:
- name: mysqld
- enable: True
- require:
- file: /etc/init.d/mysqld
[root@linux-node1~]# salt ‘*‘ state.sls mysql.install env=prod
原文地址：http://reid21.blog.51cto.com/8257755/1717008
