An elliptical arc draws an arc from the current point to a specified point. The arc command begins with the x and y radius and ends with the ending point of the arc. Between these are three other values: x axis rotation, large arc flag and sweep flag. The x axis rotation is used to rotate the ellipse that the arc is created from. This rotation maintains the start and end points, whereas a rotation with the transform attribute (outside the path description) would cause the entire path, including the start and end points, to be rotated. The large arc flag and sweep flag control which part of the ellipse is used to cut the arc. These are needed because there‘s more than one way to place an ellipse so that it includes the start and end points.

Varying x-axis-rotation Example

The leftmost arc has 0 degrees x-axis rotation, the top-middle arc has 30 degrees, the bottom-middle has 45 degrees and the rightmost has 135 degrees. Notice in the source that only the first move command and the angle change since I‘ve used relative coordinates.

Varying Large Arc and Sweep Flags Example

This example is similar to the one in the w3c specification.