码迷,mamicode.com
首页 > 其他好文 > 详细

使用PF_PACKET和SOCK_RAW发送自己定义type以太网数据包

时间:2015-12-21 18:10:40      阅读:235      评论:0      收藏:0      [点我收藏+]

标签:

本文介绍使用PF_PACKET和SOCK_RAW发送自己定义type以太网数据包,使用wireshare抓包能够获取到数据包,为Linux内核添加网络协议做铺垫。

先上码:

#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>           // close()
#include <string.h>           // strcpy, memset(), and memcpy()
#include <netdb.h>            // struct addrinfo
#include <sys/types.h>        // needed for socket(), uint8_t, uint16_t, uint32_t
#include <sys/socket.h>       // needed for socket()
#include <netinet/in.h>       // IPPROTO_ICMP, INET_ADDRSTRLEN
#include <netinet/ip.h>       // struct ip and IP_MAXPACKET (which is 65535)
#include <netinet/ip_icmp.h>  // struct icmp, ICMP_ECHO
#include <arpa/inet.h>        // inet_pton() and inet_ntop()
#include <sys/ioctl.h>        // macro ioctl is defined
#include <bits/ioctls.h>      // defines values for argument "request" of ioctl.
#include <net/if.h>           // struct ifreq
#include <linux/if_ether.h>   // ETH_P_IP = 0x0800, ETH_P_IPV6 = 0x86DD
#include <linux/if_packet.h>  // struct sockaddr_ll (see man 7 packet)
#include <net/ethernet.h>

#include <errno.h>            // errno, perror()
#define ETH_P_DEAN 0x8874 //自己定义的以太网协议type

int main (int argc, char **argv)
{
    int i, datalen,frame_length, sd, bytes;
    char *interface="eth1";;
    uint8_t data[IP_MAXPACKET];
    uint8_t src_mac[6];
    uint8_t dst_mac[6];;
    uint8_t ether_frame[IP_MAXPACKET];
    struct sockaddr_ll device;
    struct ifreq ifr;

    // Submit request for a socket descriptor to look up interface.
    if ((sd = socket (PF_PACKET, SOCK_RAW, htons (ETH_P_ALL))) < 0) {//第一次创建socket是为了获取本地网卡信息
        perror ("socket() failed to get socket descriptor for using ioctl() ");
        exit (EXIT_FAILURE);
    }

    // Use ioctl() to look up interface name and get its MAC address.
    memset (&ifr, 0, sizeof (ifr));
    snprintf (ifr.ifr_name, sizeof (ifr.ifr_name), "%s", interface);
    if (ioctl (sd, SIOCGIFHWADDR, &ifr) < 0) {
        perror ("ioctl() failed to get source MAC address ");
        return (EXIT_FAILURE);
    }
    close (sd);

    // Copy source MAC address.
    memcpy (src_mac, ifr.ifr_hwaddr.sa_data, 6);

    // Report source MAC address to stdout.
    printf ("MAC address for interface %s is ", interface);
    for (i=0; i<5; i++) {
        printf ("%02x:", src_mac[i]);
    }
    printf ("%02x\n", src_mac[5]);

    // Find interface index from interface name and store index in
    // struct sockaddr_ll device, which will be used as an argument of sendto().
    memset (&device, 0, sizeof (device));
    if ((device.sll_ifindex = if_nametoindex (interface)) == 0) {
        perror ("if_nametoindex() failed to obtain interface index ");
        exit (EXIT_FAILURE);
    }
    printf ("Index for interface %s is %i\n", interface, device.sll_ifindex);

    // Set destination MAC address: you need to fill these out
    dst_mac[0] = 0x10;//设置目的网卡地址
    dst_mac[1] = 0x78;
    dst_mac[2] = 0xd2;
    dst_mac[3] = 0xc6;
    dst_mac[4] = 0x2f;
    dst_mac[5] = 0x89;

    // Fill out sockaddr_ll.
    device.sll_family = AF_PACKET;
    memcpy (device.sll_addr, src_mac, 6);
    device.sll_halen = htons (6);

    // 发送的data,长度能够随意,可是抓包时看到最小数据长度为46,这是以太网协议规定以太网帧数据域部分最小为46字节,不足的自己主动补零处理
    datalen = 12;
    data[0] = ‘h‘;
    data[1] = ‘e‘;
    data[2] = ‘l‘;
    data[3] = ‘l‘;
    data[4] = ‘o‘;
    data[5] = ‘ ‘;
    data[6] = ‘w‘;
    data[7] = ‘o‘;
    data[8] = ‘r‘;
    data[9] = ‘l‘;
    data[10] = ‘d‘;
    data[11] = ‘!‘;

    // Fill out ethernet frame header.
    frame_length = 6 + 6 + 2   + datalen;
    // Destination and Source MAC addresses
    memcpy (ether_frame, dst_mac, 6);
    memcpy (ether_frame + 6, src_mac, 6);

    ether_frame[12] = ETH_P_DEAN / 256;
    ether_frame[13] = ETH_P_DEAN % 256;

    // data
    memcpy (ether_frame + 14 , data, datalen);
    
    // Submit request for a raw socket descriptor.
    if ((sd = socket (PF_PACKET, SOCK_RAW, htons (ETH_P_ALL))) < 0) {//创建正真发送的socket
        perror ("socket() failed ");
        exit (EXIT_FAILURE);
    }
    // Send ethernet frame to socket.
    if ((bytes = sendto (sd, ether_frame, frame_length, 0, (struct sockaddr *) &device, sizeof (device))) <= 0) {
        perror ("sendto() failed");
        exit (EXIT_FAILURE);
    }
    printf ("send num=%d,read num=%d\n",frame_length,bytes);     
    // Close socket descriptor.
    close (sd);


    return (EXIT_SUCCESS);
}

抓包获取:
技术分享


下一章我们在Linux使用dev_add_pack加入此type的协议探測。

感谢David Buchan的网页提供的參考代码:

http://www.pdbuchan.com/rawsock/rawsock.html


使用PF_PACKET和SOCK_RAW发送自己定义type以太网数据包

标签:

原文地址:http://www.cnblogs.com/mengfanrong/p/5063676.html

(0)
(0)
   
举报
评论 一句话评论(0
登录后才能评论!
© 2014 mamicode.com 版权所有  联系我们:gaon5@hotmail.com
迷上了代码!