码迷,mamicode.com
首页 > 其他好文 > 详细

Live disk migration with libvirt blockcopy

时间:2015-12-25 16:34:53      阅读:343      评论:0      收藏:0      [点我收藏+]

标签:

nova采用 libvirt blockcopy(python  API virDomainBlockRebase)来做live snapshot.

Create the base image:

 $ qemu-img create -f qcow2 base 1G
$ guestfish -a base.qcow2 
[. . .]
><fs> run 
><fs> part-disk /dev/sda mbr
><fs> mkfs ext4 /dev/sda1
><fs> mount /dev/sda1 /
><fs> touch /foo
><fs> ls /
foo
><fs> exit

Create another QCOW2 overlay snapshot ‘snap1’, with backing file as ‘base’:

$ qemu-img create -f qcow2 -b base.qcow2   -o backing_fmt=qcow2 snap1.qcow2

Add a file to snap1.qcow2:

$ guestfish -a snap1.qcow2 
[. . .]
><fs> run
><fs> part-disk /dev/sda mbr
><fs> mkfs ext4 /dev/sda1
><fs> mount /dev/sda1 /
><fs> touch /bar
><fs> ls /
bar
baz
foo
lost+found
><fs> exit

Create another QCOW2 overlay snapshot ‘snap2’, with backing file as ‘snap1’:

$ qemu-img create -f qcow2 -b snap1.qcow2   -o backing_fmt=qcow2 snap2.qcow2

Add another test file ‘baz’ into snap2.qcow2 using guestfish (refer to previous examples above) to distinguish contents of base, snap1 and snap2.

Create a simple libvirt XML file as below, with source file pointing to snap2.qcow2 — which will be the active block device (i.e. it tracks all new guest writes):

$ cat <<EOF > /etc/libvirt/qemu/testvm.xml
<domain type=‘kvm‘>
  <name>testvm</name>
  <memory unit=‘MiB‘>512</memory>   
  <vcpu>1</vcpu>
  <os>
    <type arch=‘x86_64‘>hvm</type>
  </os>
  <devices>
    <disk type=‘file‘ device=‘disk‘>
      <driver name=‘qemu‘ type=‘qcow2‘/>
      <source file=‘/export/vmimages/snap2.qcow2‘/>
      <target dev=‘vda‘ bus=‘virtio‘/>
    </disk>   
  </devices>
</domain>
EOF

Define the guest and start it:

$ virsh define etc/libvirt/qemu/testvm.xml
  Domain testvm defined from /etc/libvirt/qemu/testvm.xml
$ virsh start testvm
Domain testvm started

Perform live disk migration
Undefine the running libvirt guest to make it transient[*]:

$ virsh dumpxml --inactive testvm > /var/tmp/testvm.xml
$ virsh undefine testvm

Check what is the current block device before performing live disk migration:

$ virsh domblklist testvm
Target     Source
------------------------------------------------
vda        /export/vmimages/snap2.qcow2

Optionally, display the backing chain of snap2.qcow2:

$ qemu-img info --backing-chain /export/vmimages/snap2.qcow2
[. . .] # Output removed for brevity

Initiate blockcopy (live disk mirroring):

$ virsh blockcopy --domain testvm vda   /export/blockcopy-test/backups/copy.qcow2   --wait --verbose --shallow   --pivot

Details of the above command: It creates copy.qcow2 file in the specified path; performs a --shallow blockcopy (i.e. the ‘copy’ shares the backing chain) of the current block device (vda); –pivot will pivot the live QEMU to the ‘copy’.

Confirm that QEMU has pivoted to the ‘copy’ by enumerating the current block device in use:

$ virsh domblklist testvm
Target     Source
------------------------------------------------
vda        /export/vmimages/copy.qcow2

Again, display the backing chain of ‘copy’, it should be the resultant chain as noted in the Scenario section above).

$ qemu-img info --backing-chain /export/vmimages/copy.qcow2

Enumerate the contents of copy.qcow2:

$ guestfish -a copy.qcow2 
[. . .]
><fs> run
><fs> mount /dev/sda1 /
><fs> ls /
bar
foo
baz
lost+found
><fs> quit

(You can notice above: all the content from base.qcow2, snap1.qcow2, and snap2.qcow2 mirrored into copy.qcow2.)

Edit the libvirt guest XML to use the copy.qcow2, and define it:

$ virsh edit testvm
# Replace the <source file=‘/export/vmimages/snap2.qcow2‘/> 
# with <source file=‘/export/vmimages/copy.qcow2‘/>
[. . .] 

$ virsh define /var/tmp/testvm.xml

[*] Reason for the undefining and defining the guest again: As of writing this, QEMU has to support persistent dirty bitmap — this enables us to restart a QEMU process with disk mirroring intact. There are some in-progress patches upstream for a while. Until they are in main line QEMU, the current approach (as illustrated above) is: make a running libvirt guest transient temporarily, perform live blockcopy, and make the guest persistent again. (Thanks to Eric Blake, one of libvirt project’s principal developers, for this detail.)

http://kashyapc.com/2014/07/06/live-disk-migration-with-libvirt-blockcopy/

 

Live disk migration with libvirt blockcopy

标签:

原文地址:http://www.cnblogs.com/allcloud/p/5076190.html

(0)
(0)
   
举报
评论 一句话评论(0
登录后才能评论!
© 2014 mamicode.com 版权所有  联系我们:gaon5@hotmail.com
迷上了代码!