码迷,mamicode.com
首页 > 其他好文 > 详细

配置greenplum参数

时间:2016-02-22 16:42:51      阅读:172      评论:0      收藏:0      [点我收藏+]

标签:

在进行一个greenplum安装之前需要进行配置一下相关的系统参数,否则很容易出现意想不到的错误.

1.修改系统参数
编辑 /etc/sysctl.conf ,以下是最小配置 
kernel.shmmax = 500000000
kernel.shmmni = 4096
kernel.shmall = 4000000000
kernel.sem = 250 512000 100 2048
kernel.sysrq = 1
kernel.core_uses_pid = 1
kernel.msgmnb = 65536
kernel.msgmax = 65536
kernel.msgmni = 2048
net.ipv4.tcp_syncookies = 1
net.ipv4.ip_forward = 0
net.ipv4.conf.default.accept_source_route = 0
net.ipv4.tcp_tw_recycle = 1
net.ipv4.tcp_max_syn_backlog = 4096
net.ipv4.conf.all.arp_filter = 1
net.ipv4.ip_local_port_range = 1025 65535
net.core.netdev_max_backlog = 10000
net.core.rmem_max = 2097152
net.core.wmem_max = 2097152
vm.overcommit_memory = 2  
修改后需要reboot
2.修改文件打开数等限制
编辑/etc/security/limits.conf
* soft nofile 65536
* hard nofile 65536
* soft nproc 131072
* hard nproc 131072

编辑/etc/security/limits.d/90-nproc.conf
* soft nofile 65536
* hard nofile 65536
* soft nproc 131072
* hard nproc 131072

3.修改scheduler
编辑scheduler,原先默认是cfq
echo deadline > /sys/block/vda/queue/scheduler
[root@bigdata03 ~]# more  /sys/block/vda/queue/scheduler 
noop anticipatory [deadline] cfq 

4.编辑/boot/grub/grub.conf
新增 elevator=deadline
[root @bigdata03 ~]# more /boot/grub/grub.conf
...elevator=deadline crashkernel=auto ...

5.编辑设备块大小
[root@bigdata03 ~]# /sbin/blockdev --setra 16384 /dev/vda
[root@bigdata03 ~]# /sbin/blockdev --getra /dev/vda
16384

具体参考:http://gpdb.docs.pivotal.io/4370/prep_os-system-params.html#topic3

其实我没改相关系统参数之前,碰到最多的错误就是"设备磁盘空间不足".

官网给出的修改方案固然可行,不过有更方便的修改方案:

针对第一条:修改系统参数

sysctl -p - >> /etc/sysctl.conf <<EOF
kernel.shmmax = 500000000
kernel.shmmni = 4096
kernel.shmall = 4000000000
kernel.sem = 250 512000 100 2048
kernel.sysrq = 1
kernel.core_uses_pid = 1
kernel.msgmnb = 65536
kernel.msgmax = 65536
kernel.msgmni = 2048
net.ipv4.tcp_syncookies = 1
net.ipv4.ip_forward = 0
net.ipv4.conf.default.accept_source_route = 0
net.ipv4.tcp_tw_recycle = 1
net.ipv4.tcp_max_syn_backlog = 4096
net.ipv4.conf.all.arp_filter = 1
net.ipv4.ip_local_port_range = 1025 65535
net.core.netdev_max_backlog = 10000
net.core.rmem_max = 2097152
net.core.wmem_max = 2097152
vm.overcommit_memory = 2
EOF
这样修改的可以不用reboot

配置greenplum参数

标签:

原文地址:http://www.cnblogs.com/codeblock/p/5207357.html

(0)
(0)
   
举报
评论 一句话评论(0
登录后才能评论!
© 2014 mamicode.com 版权所有  联系我们:gaon5@hotmail.com
迷上了代码!