标签：
使用DE2之前,需要先安装"USB-Blaster"的驱动, 简单总结如下:
详细的安装步骤参见 <Getting Started with Altera’s DE2 Board>
1 硬件连接
DE2 --> USB cable --> USB port(computer)
2 指定路径
1) use "Found New Hardware Wizard"
2) choose "Install from a specific location"
3) include the install location
E.g. "D:\altera\11.1\quartus\drivers\usb-blaster"
标签：
原文地址：http://www.cnblogs.com/xinxue/p/5222140.html
