环境centos6.5
首先 yum install conky
如果你此时 在终端直接conky会直接掉调用默认的配置，配置在/etc/conky/conky.conf下
我们可以使用自己的配置将配置文件写在主目录下
# set to yes if you want Conky to be forked in the background
background yes
cpu_avg_samples 2
net_avg_samples 2
out_to_console no
# X font when Xft is disabled, you can pick one with program xfontsel
#font 7x12
#font 6x10
#font 7x13
#font 8x13
#font 7x12
#font *mintsmild.se*
#font -*-*-*-*-*-*-34-*-*-*-*-*-*-*
#font -artwiz-snap-normal-r-normal-*-*-100-*-*-p-*-iso8859-1
# Use Xft?
use_xft yes
# Xft font when Xft is enabled
xftfont Sans:size=8
own_window_transparent no
#own_window_colour hotpink
# Text alpha when using Xft
xftalpha 0.8
# on_bottom yes
# mail spool
mail_spool $MAIL
# Update interval in seconds
update_interval 1
# Create own window instead of using desktop (required in nautilus)
own_window yes
own_window_transparent yes
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
own_window_type override
# Use double buffering (reduces flicker, may not work for everyone)
double_buffer yes
# Minimum size of text area
minimum_size 260 5
maximum_width 260
# Draw shades?
draw_shades no
# Draw outlines?
draw_outline no
# Draw borders around text
draw_borders no
# Stippled borders?
stippled_borders no
# border margins
border_margin 4
# border width
border_width 1
# Default colors and also border colors
default_color white
default_shade_color white
default_outline_color white
# Text alignment, other possible values are commented
#alignment top_left
#minimum_size 10 10
gap_x 5
gap_y 2
alignment top_right
#alignment bottom_left
#alignment bottom_right
# Gap between borders of screen and text
# Add spaces to keep things from moving about? This only affects certain objects.
use_spacer none
# Subtract file system buffers from used memory?
no_buffers yes
# set to yes if you want all text to be in uppercase
uppercase no
# none, xmms, bmp, audacious, infopipe (default is none)
# xmms_player bmp
# boinc (seti) dir
# seti_dir /opt/seti
# Possible variables to be used:
#
# Variable Arguments Description
# acpiacadapter ACPI ac adapter state.
# acpifan ACPI fan state
# acpitemp ACPI temperature.
# adt746xcpu CPU temperature from therm_adt746x
# adt746xfan Fan speed from therm_adt746x
# battery (num) Remaining capasity in ACPI or APM
# battery. ACPI battery number can be
# given as argument (default is BAT0).
# buffers Amount of memory buffered
# cached Amount of memory cached
# color (color) Change drawing color to color
# cpu CPU usage in percents
# cpubar (height) Bar that shows CPU usage, height is
# bar's height in pixels
# downspeed net Download speed in kilobytes
# downspeedf net Download speed in kilobytes with one
# decimal
# exec shell command Executes a shell command and displays
# the output in torsmo. warning: this
# takes a lot more resources than other
# variables. I'd recommend coding wanted
# behaviour in C and posting a patch :-).
# execi interval, shell Same as exec but with specific interval.
# command Interval can't be less than
# update_interval in configuration.
# fs_bar (height), (fs) Bar that shows how much space is used on
# a file system. height is the height in
# pixels. fs is any file on that file
# system.
# fs_free (fs) Free space on a file system available
# for users.
# fs_free_perc (fs) Free percentage of space on a file
# system available for users.
# fs_size (fs) File system size
# fs_used (fs) File system used space
# hr (height) Horizontal line, height is the height in
# pixels
# i2c (dev), type, n I2C sensor from sysfs (Linux 2.6). dev
# may be omitted if you have only one I2C
# device. type is either in (or vol)
# meaning voltage, fan meaning fan or temp
# meaning temperature. n is number of the
# sensor. See /sys/bus/i2c/devices/ on
# your local computer.
# kernel Kernel version
# loadavg (1), (2), (3) System load average, 1 is for past 1
# minute, 2 for past 5 minutes and 3 for
# past 15 minutes.
# machine Machine, i686 for example
# mails Mail count in mail spool. You can use
# program like fetchmail to get mails from
# some server using your favourite
# protocol. See also new_mails.
# mem Amount of memory in use
# membar (height) Bar that shows amount of memory in use
# memmax Total amount of memory
# memperc Percentage of memory in use
# new_mails Unread mail count in mail spool.
# nodename Hostname
# outlinecolor (color) Change outline color
# pre_exec shell command Executes a shell command one time before
# torsmo displays anything and puts output
# as text.
# processes Total processes (sleeping and running)
# running_processes Running processes (not sleeping),
# requires Linux 2.6
# shadecolor (color) Change shading color
# stippled_hr (space), Stippled (dashed) horizontal line
# (height)
# swapbar (height) Bar that shows amount of swap in use
# swap Amount of swap in use
# swapmax Total amount of swap
# swapperc Percentage of swap in use
# sysname System name, Linux for example
# time (format) Local time, see man strftime to get more
# information about format
# totaldown net Total download, overflows at 4 GB on
# Linux with 32-bit arch and there doesn't
# seem to be a way to know how many times
# it has already done that before torsmo
# has started.
# totalup net Total upload, this one too, may overflow
# updates Number of updates (for debugging)
# upspeed net Upload speed in kilobytes
# upspeedf net Upload speed in kilobytes with one
# decimal
# uptime Uptime
# uptime_short Uptime in a shorter format
#
# seti_prog Seti@home current progress
# seti_progbar (height) Seti@home current progress bar
# seti_credit Seti@hoome total user credit
# variable is given either in format $variable or in ${variable}. Latter
# allows characters right after the variable and must be used in network
# stuff because of an argument
#${font Dungeon:style=Bold:pixelsize=10}I can change the font as well
#${font Verdana:size=10}as many times as I choose
#${font Perry:size=10}Including UTF-8,
# stuff after 'TEXT' will be formatted on screen
#${font Grunge:size=12}${time %a %b %d}${alignr -25}${time %k:%M}
TEXT
${color green} ${font PizzaDude Bullets:size=16}?${font :size=10} Date&Time $hr $font$color${goto 1000}${time %l:%M}${font}${time %p}
${time %A, %e %B %Y}
${color green}${font OpenLogos:size=18} W${font :size=10} SYSTEM $hr $font $color
Hostname: $alignr$nodename
Kernel: $alignr$kernel
Uptime: $alignr$uptime
Temp: ${alignr}${acpitemp}°C
CPU: ${alignr}${freq dyn} MHz
Processes: ${alignr}$processes ($running_processes running)
Load: ${alignr}$loadavg
${color}battery_percent:${battery_percent BAT0}%${alignr}battery_time:${if_match "${acpiacadapter}"=="on-line"}(外接电源)${else}${battery_time BAT0}${endif}
${if_match ${battery_percent BAT0}>75}${else}${if_match ${battery_percent BAT0}<20}${else}${endif}${endif}${battery_bar BAT0}
CPU1 ${alignr}${cpu cpu1}%
${cpubar 4 cpu1}
CPU2 ${alignr}${cpu cpu2}%
${cpubar 4 cpu2}
Ram ${alignr}$mem / $memmax ($memperc%)
${membar 4}
swap ${alignr}$swap / $swapmax ($swapperc%)
${swapbar 4}
${color blue}Highest CPU $alignr CPU% MEM% $color
${top name 1}$alignr${top cpu 1} ${top mem 1}
${top name 2}$alignr${top cpu 2} ${top mem 2}
${top name 3}$alignr${top cpu 3} ${top mem 3}
${color blue}Highest MEM $alignr CPU% MEM% $color
${top_mem name 1}$alignr${top_mem cpu 1} ${top_mem mem 1}
${top_mem name 2}$alignr${top_mem cpu 2} ${top_mem mem 2}
${top_mem name 3}$alignr${top_mem cpu 3} ${top_mem mem 3}
${color green} ${font PizzaDude Bullets:size=16}J${font :size=10} HDD $hr $font $color
Root: ${alignr}${fs_free /} / ${fs_size /}
${fs_bar 4 /}
Usr: ${alignr}${fs_free /usr} / ${fs_size /usr}
${fs_bar 4 /usr}
${color green} ${font PizzaDude Bullets:size=16}X${font :size=10} NETWORK $hr $font $color
$color Local IP: $alignr${addr wlan0}
$color Download: ${downspeedf wlan0} KB/s $alignr total: ${totaldown wlan0}
$color Upload: ${upspeedf wlan0} KB/s $alignr total:${totalup wlan0}
${color green} ${font PizzaDude Bullets:size=16}?${font :size=10} WEATHER $hr $font $color
${goto 12}今天：${execi 10800 ~/.config/wjx.sh}
#${goto 12}明天：${execi 10800 ~/.config/wjx.sh}
wjx.sh
#!/bin/sh
URL=http://www.baidu.com/s?wd=%CC%EC%C6%F8
baidutq=/tmp/wjx
w3m -dump $URL > $baidutq
#cat -n /tmp/mypogoda |grep "? 分时温度"
#text=`head -n 118 /tmp/wjx |tail -n 49`
#echo $text
#`more "$text"`
#var=`echo "$text"|awk -F '周' '{print $2}' `
#echo $var
var=`cat "$baidutq" |grep "实时："`
echo $var
其他配置
background yes
use_xft yes
xftfont Zecton:size=8
xftalpha 0.5
update_interval 1.0
total_run_times 0
double_buffer yes
no_buffers no
own_window yes
own_window_transparent yes
own_window_type override
own_window_hints undecorate,sticky,skip_taskbar,skip_pager
minimum_size 500 5
maximum_width 200
draw_shades yes
draw_outline no
draw_borders no
default_color lightgrey
alignment top_right
gap_x 15
gap_y 3
uppercase no
override_utf8_locale yes
TEXT
${color white} ${font PizzaDude Bullets:size=16}V${font :size=10} Date&Time $hr $font $color
${goto 1000}${time %l:%M}${font}${time %p}
${time %A, %e %B %Y}
${color white}${font OpenLogos:size=18} I${font :size=10} SYSTEM $hr $font
$color $font$sysname: ${alignr} $kernel ($machine)
$color Battery: ${alignr}$battery_time
${color white} ${font StyleBats:size=16}V${font :size=10} CPU $hr $font $color
$color ${font}CPU@${freq}MHz: ${cpu cpu1}% ${alignr}${cpubar cpu1 8,60}
$color ${top name 1} $alignr ${top cpu 1}%
$color ${top name 2} $alignr ${top cpu 2}%
${color white}${font StyleBats:size=16}E${font :size=10} MEMORY $hr $font $color
${color}${font}RAM: $mem/$memmax $alignr $memperc%
$color ${membar}
${color}${font}Swap: $swap/$swapmax $alignr $swapperc%
$color ${swapbar}
$color ${top_mem name 1} $alignr ${top_mem mem 1}%
$color ${top_mem name 2} $alignr ${top_mem mem 2}%
${color white} ${font PizzaDude Bullets:size=16}K${font :size=10} HDD $hr $font $color
$color root: ${fs_used /}/${fs_size /} $alignr ${fs_free_perc /}%
$color ${fs_bar /}
$color usr: ${fs_used /usr}/${fs_size /usr} $alignr ${fs_free_perc /usr}%
$color ${fs_bar /usr}
$color opt: ${fs_used /opt}/${fs_size /opt} $alignr ${fs_free_perc /opt}%
$color ${fs_bar /opt}
$color boot: ${fs_used /boot}/${fs_size /boot} $alignr ${fs_free_perc /boot}%
$color ${fs_bar /boot}
${color white} ${font PizzaDude Bullets:size=16}@${font :size=10} NETWORK $hr $font $color
$color Local IP: $alignr${addr wlan0}
$color Download: ${downspeedf wlan0} KB/s $alignr ${totaldown wlan0}
$color Upload: ${upspeedf wlan0} KB/s $alignr ${totalup wlan0}
${color white} ${font PizzaDude Bullets:size=16}@${font :size=10} Weather $hr $font $color
$color Skies are: ${alignr}${weather http://weather.noaa.gov/pub/data/observations/metar/stations/ EFTP cloud_cover}
$color Winds from the: ${alignr}${weather http://weather.noaa.gov/pub/data/observations/metar/stations/ EFTP wind_dir}
$color Winds speed: ${alignr}${weather http://weather.noaa.gov/pub/data/observations/metar/stations/ EFTP wind_speed} km/h
$color Humidity: ${alignr}${weather http://weather.noaa.gov/pub/data/observations/metar/stations/ EFTP humidity}% relative humidity
$color Temperature: ${alignr}${weather http://weather.noaa.gov/pub/data/observations/metar/stations/ EFTP temperature}C
# Conky settings #
background no
update_interval 1
cpu_avg_samples 4
net_avg_samples 2
override_utf8_locale yes
double_buffer yes
no_buffers yes
text_buffer_size 2048
#imlib_cache_size 0
temperature_unit fahrenheit
# Window specifications #
own_window yes
own_window_type override
own_window_transparent yes
own_window_hints undecorate,sticky,skip_taskbar,skip_pager,below
border_inner_margin 0
border_outer_margin 0
minimum_size 100 150
maximum_width 200
alignment tr
gap_x 3
gap_y 2
# Graphics settings #
draw_shades no
draw_outline no
draw_borders no
draw_graph_borders no
# Text settings #
use_xft yes
xftfont caviar dreams:size=8
xftalpha 0.5
uppercase no
temperature_unit celsius
default_color FFFFFF
# Lua Load #
lua_load ~/.conky/clock_rings.lua
lua_draw_hook_pre clock_rings
TEXT
${voffset 8}${color FF6600}${font Monospace:style=Bold:size=16}${time %A}${font}${voffset -8}${alignr 50}${color FFFFFF}${font caviar dreams:size=38}${time %e}${font}
${color FFFFFF}${voffset -30}${color FFFFFF}${font Monospace:style=Bold:size=18}${time %b}${font}${voffset -3} ${color FFFFFF}${font caviar dreams:size=20}${time %Y}${font}${color FF6600}${hr}
${voffset 140}${font Monospace:style=Bold:size=10}${alignr}当前温度${font}
${font caviar dreams:size=12}${color FFFFFF}${alignr}${weather http://weather.noaa.gov/pub/data/observations/metar/stations/ ZHCC temperature temperature 30} °C${font}
${color EE8262}${goto 25}${voffset 35}${cpu cpu0}%
${color FF6600}${goto 25}CPU0
${color CD950C}${goto 50}${voffset 23}${cpu cpu1}%
${color FF6600}${goto 50}CPU1
${color 228B22}${goto 75}${voffset 23}${cpu cpu2}%
${color FF6600}${goto 75}CPU2
${color 00FF00}${goto 100}${voffset 23}${cpu cpu3}%
${color FF6600}${goto 100}CPU3
#${color 00FF00}${goto 110}${voffset 30}${downspeed eth0}${goto 165}${downspeed wlan0}
#${color FF6600}${goto 110}${upspeed eth0}${goto 165}${upspeed wlan0}
#${color FF6600}${font Monospace:style=Bold:size=8}${goto 125}网络流量
网络流量:
IP address: $alignr${addr wlan0}
Download: $alignr ${downspeed wlan0}/s
Upload: $alignr ${upspeed wlan0}/s
${color FFFFFF}${font Monospace:style=Bold:size=9}运行时间: ${uptime_short} ${goto 110}物理内存: ${memperc}%
${color FFFFFF}进程总数: ${processes} ${goto 110}虚拟内存: ${swapperc}%
${color FFFFFF}运行中: ${running_processes} ${goto 110}磁盘使用: ${fs_used_perc /}%
#${color 00FF00}${font caviar dreams:size=8}${alignr}${nodename}
${color 00FF00}${font caviar dreams:size=8}${alignr}Release: ${pre_exec cat /etc/redhat-release}$machine
${color 00FF00}${font caviar dreams:size=8}${alignr}Kernel: ${kernel}
原文地址：http://blog.csdn.net/w1242245/article/details/38147917
