码迷,mamicode.com
首页 > 其他好文 > 详细

redis_主从配置以及自动切换

时间:2016-04-16 07:17:14      阅读:285      评论:0      收藏:0      [点我收藏+]

标签:

3台虚拟机

192.168.1.52

192.168.1.53

192.168.1.54

上来做这个操作:

1.机器上编译安装(3.0.7版本)redis->wget http://download.redis.io/releases/redis-3.0.7.tar.gz

2.配置:

主机:192.168.1.52  从机:192.168.1.53   192.168.1.54

配置文件(redis.conf):

192.168.1.52:

daemonize yes
pidfile "/var/run/redis.pid"
port 6379
tcp-backlog 511
timeout 0
tcp-keepalive 0
loglevel notice
logfile "/home/log/redis.log"
databases 16
save 900 1
save 300 10
save 60 10000
stop-writes-on-bgsave-error yes
rdbcompression yes
rdbchecksum yes
dbfilename "dump.rdb"
dir "/usr/local/redis-3.0.7"
slave-serve-stale-data yes
slave-read-only yes
repl-diskless-sync no
repl-diskless-sync-delay 5
repl-disable-tcp-nodelay no
slave-priority 100
appendonly no
appendfilename "appendonly.aof"
appendfsync everysec
no-appendfsync-on-rewrite no
auto-aof-rewrite-percentage 100
auto-aof-rewrite-min-size 64mb
aof-load-truncated yes
lua-time-limit 5000
slowlog-log-slower-than 10000
slowlog-max-len 128
latency-monitor-threshold 0
notify-keyspace-events ""
hash-max-ziplist-entries 512
hash-max-ziplist-value 64
list-max-ziplist-entries 512
list-max-ziplist-value 64
set-max-intset-entries 512
zset-max-ziplist-entries 128
zset-max-ziplist-value 64
hll-sparse-max-bytes 3000
activerehashing yes
client-output-buffer-limit normal 0 0 0
client-output-buffer-limit slave 256mb 64mb 60
client-output-buffer-limit pubsub 32mb 8mb 60
hz 10
aof-rewrite-incremental-fsync yes

从机(redis.conf):192.168.1.53  192.168.1.54

[root@localhost redis-3.0.7]# cat redis.conf | egrep -v "^$|^#"
daemonize yes
pidfile "/var/run/redis.pid"
port 6379
tcp-backlog 511
timeout 0
tcp-keepalive 0
loglevel notice
logfile "/home/log/redis.log"
databases 16
save 900 1
save 300 10
save 60 10000
stop-writes-on-bgsave-error yes
rdbcompression yes
rdbchecksum yes
dbfilename "dump.rdb"
dir "/usr/local/redis-3.0.7"
slaveof 192.168.1.52 6379
slave-serve-stale-data yes
slave-read-only yes
repl-diskless-sync no
repl-diskless-sync-delay 5
repl-disable-tcp-nodelay no
slave-priority 100
appendonly no
appendfilename "appendonly.aof"
appendfsync everysec
no-appendfsync-on-rewrite no
auto-aof-rewrite-percentage 100
auto-aof-rewrite-min-size 64mb
aof-load-truncated yes
lua-time-limit 5000
slowlog-log-slower-than 10000
slowlog-max-len 128
latency-monitor-threshold 0
notify-keyspace-events ""
hash-max-ziplist-entries 512
hash-max-ziplist-value 64
list-max-ziplist-entries 512
list-max-ziplist-value 64
set-max-intset-entries 512
zset-max-ziplist-entries 128
zset-max-ziplist-value 64
hll-sparse-max-bytes 3000
activerehashing yes
client-output-buffer-limit normal 0 0 0
client-output-buffer-limit slave 256mb 64mb 60
client-output-buffer-limit pubsub 32mb 8mb 60
hz 10
aof-rewrite-incremental-fsync yes

3.将redis_server跑起来

查看信息: 

redis-cli -h 192.168.1.52 -p 6379 info replication

# Replication
role:master
connected_slaves:0
master_repl_offset:0
repl_backlog_active:0
repl_backlog_size:1048576
repl_backlog_first_byte_offset:0
repl_backlog_histlen:0

redis-cli -h 192.168.1.53 -p 6379 info replication

技术分享
# Replication
role:slave
master_host:192.168.1.52
master_port:6379
master_link_status:up
master_last_io_seconds_ago:2
master_sync_in_progress:0
slave_repl_offset:15
slave_priority:100
slave_read_only:1
connected_slaves:1
slave0:ip=192.168.1.54,port=6379,state=online,offset=1,lag=0
master_repl_offset:1
repl_backlog_active:1
repl_backlog_size:1048576
repl_backlog_first_byte_offset:2
repl_backlog_histlen:0

redis-cli -h 192.168.1.54 -p 6379 info replication

技术分享
# Replication
role:slave
master_host:192.168.1.52
master_port:6379
master_link_status:up
master_last_io_seconds_ago:1
master_sync_in_progress:0
slave_repl_offset:169
slave_priority:100
slave_read_only:1
connected_slaves:0
master_repl_offset:0
repl_backlog_active:0
repl_backlog_size:1048576
repl_backlog_first_byte_offset:0
repl_backlog_histlen:0

此时再来看192.168.1.52主从信息
syswjdeMacBook-Air:shell syswj$ ./watch_redis.sh 52 info
52
# Replication
role:master
connected_slaves:2
slave0:ip=192.168.1.53,port=6379,state=online,offset=211,lag=1
slave1:ip=192.168.1.54,port=6379,state=online,offset=211,lag=0
master_repl_offset:211
repl_backlog_active:1
repl_backlog_size:1048576
repl_backlog_first_byte_offset:2
repl_backlog_histlen:210

3.开启redis-sentinel进行主从监控切换管理(只开启一个实例)
配置
port 26379
dir "/tmp"
sentinel monitor mymaster 192.168.1.52 6379 2
daemonize yes
sentinel down-after-milliseconds mymaster 10000
sentinel config-epoch mymaster 10
sentinel leader-epoch mymaster 10
logfile "/home/log/sen.log"
sentinel known-sentinel mymaster 127.0.0.1 26379 efbd30332f50847e0b0e9c5ab0adc5dfb91823d2
sentinel current-epoch 10


技术分享
运行后:
技术分享
3595:X 15 Apr 11:57:29.146 # Sentinel runid is fdc1c1d8a5adf48a5fecc229be42810a61eb8603
3595:X 15 Apr 11:57:29.146 # +monitor master mymaster 192.168.1.52 6379 quorum 2
3595:X 15 Apr 11:57:30.146 * +slave slave 192.168.1.53:6379 192.168.1.53 6379 @ mymaster 192.168.1.52 6379
3595:X 15 Apr 11:57:30.156 * +slave slave 192.168.1.54:6379 192.168.1.54 6379 @ mymaster 192.168.1.52 6379
3595:X 15 Apr 11:57:30.871 * -dup-sentinel master mymaster 192.168.1.52 6379 #duplicate of 127.0.0.1:26379 or fdc1c1d8a5adf48a5fecc229be42810a61eb8603
3595:X 15 Apr 11:57:30.871 * +sentinel sentinel 127.0.0.1:26379 127.0.0.1 26379 @ mymaster 192.168.1.52 6379
已经监控到两个slaves

4.测试主从切换
关闭掉主redis: redis-cli -h 192.168.1.52 -p 6379 shutdown
技术分享
发现54被切换成主redis了,53依然是从redis,不过从属于54了
syswjdeMacBook-Air:shell syswj$ ./watch_redis.sh 54 info
54
# Replication
role:master
connected_slaves:1
slave0:ip=192.168.1.53,port=6379,state=online,offset=179,lag=1
master_repl_offset:179
repl_backlog_active:1
repl_backlog_size:1048576
repl_backlog_first_byte_offset:2
repl_backlog_histlen:178
syswjdeMacBook-Air:shell syswj$ ./watch_redis.sh 53 info
53
# Replication
role:slave
master_host:192.168.1.54
master_port:6379
master_link_status:up
master_last_io_seconds_ago:2
master_sync_in_progress:0
slave_repl_offset:320
slave_priority:100
slave_read_only:1
connected_slaves:0
master_repl_offset:0
repl_backlog_active:0
repl_backlog_size:1048576
repl_backlog_first_byte_offset:0
repl_backlog_histlen:0
syswjdeMacBook-Air:shell syswj$
查看主从管理日志:
3670:X 15 Apr 12:06:14.376 # +sdown master mymaster 192.168.1.52 6379
3670:X 15 Apr 12:06:14.435 # +odown master mymaster 192.168.1.52 6379 #quorum 2/2
3670:X 15 Apr 12:06:14.435 # +new-epoch 12
3670:X 15 Apr 12:06:14.435 # +try-failover master mymaster 192.168.1.52 6379
3670:X 15 Apr 12:06:14.444 # +vote-for-leader 96e852d3d56a2dc45b2505e22bd430d1d6c7de13 12
3670:X 15 Apr 12:06:14.447 # 127.0.0.1:26379 voted for 96e852d3d56a2dc45b2505e22bd430d1d6c7de13 12
3670:X 15 Apr 12:06:14.548 # +elected-leader master mymaster 192.168.1.52 6379
3670:X 15 Apr 12:06:14.549 # +failover-state-select-slave master mymaster 192.168.1.52 6379
3670:X 15 Apr 12:06:14.610 # +selected-slave slave 192.168.1.54:6379 192.168.1.54 6379 @ mymaster 192.168.1.52 6379
3670:X 15 Apr 12:06:14.610 * +failover-state-send-slaveof-noone slave 192.168.1.54:6379 192.168.1.54 6379 @ mymaster 192.168.1.52 6379
3670:X 15 Apr 12:06:14.678 * +failover-state-wait-promotion slave 192.168.1.54:6379 192.168.1.54 6379 @ mymaster 192.168.1.52 6379
3670:X 15 Apr 12:06:15.491 # +promoted-slave slave 192.168.1.54:6379 192.168.1.54 6379 @ mymaster 192.168.1.52 6379
3670:X 15 Apr 12:06:15.491 # +failover-state-reconf-slaves master mymaster 192.168.1.52 6379
3670:X 15 Apr 12:06:15.548 * +slave-reconf-sent slave 192.168.1.53:6379 192.168.1.53 6379 @ mymaster 192.168.1.52 6379
3670:X 15 Apr 12:06:16.550 * +slave-reconf-inprog slave 192.168.1.53:6379 192.168.1.53 6379 @ mymaster 192.168.1.52 6379
3670:X 15 Apr 12:06:16.550 * +slave-reconf-done slave 192.168.1.53:6379 192.168.1.53 6379 @ mymaster 192.168.1.52 6379
3670:X 15 Apr 12:06:16.648 # +failover-end master mymaster 192.168.1.52 6379
3670:X 15 Apr 12:06:16.648 # +switch-master mymaster 192.168.1.52 6379 192.168.1.54 6379
3670:X 15 Apr 12:06:16.651 * +slave slave 192.168.1.53:6379 192.168.1.53 6379 @ mymaster 192.168.1.54 6379
3670:X 15 Apr 12:06:16.652 * +slave slave 192.168.1.52:6379 192.168.1.52 6379 @ mymaster 192.168.1.54 6379
3670:X 15 Apr 12:06:26.683 # +sdown slave 192.168.1.52:6379 192.168.1.52 6379 @ mymaster 192.168.1.54 6379


来测试重新开启机器52:
稍等一段世界发现:
技术分享
52也成为54得slave了
syswjdeMacBook-Air:shell syswj$ ./watch_redis.sh 52 info
52
# Replication
role:slave
master_host:192.168.1.54
master_port:6379
master_link_status:up
master_last_io_seconds_ago:2
master_sync_in_progress:0
slave_repl_offset:8252
slave_priority:100
slave_read_only:1
connected_slaves:0
master_repl_offset:0
repl_backlog_active:0
repl_backlog_size:1048576
repl_backlog_first_byte_offset:0
repl_backlog_histlen:0
哨兵日志如下:
3670:X 15 Apr 12:06:16.550 * +slave-reconf-done slave 192.168.1.53:6379 192.168.1.53 6379 @ mymaster 192.168.1.52 6379
3670:X 15 Apr 12:06:16.648 # +failover-end master mymaster 192.168.1.52 6379
3670:X 15 Apr 12:06:16.648 # +switch-master mymaster 192.168.1.52 6379 192.168.1.54 6379
3670:X 15 Apr 12:06:16.651 * +slave slave 192.168.1.53:6379 192.168.1.53 6379 @ mymaster 192.168.1.54 6379
3670:X 15 Apr 12:06:16.652 * +slave slave 192.168.1.52:6379 192.168.1.52 6379 @ mymaster 192.168.1.54 6379
3670:X 15 Apr 12:06:26.683 # +sdown slave 192.168.1.52:6379 192.168.1.52 6379 @ mymaster 192.168.1.54 6379
3670:X 15 Apr 12:07:54.741 # -sdown slave 192.168.1.52:6379 192.168.1.52 6379 @ mymaster 192.168.1.54 6379
3670:X 15 Apr 12:08:04.734 * +convert-to-slave slave 192.168.1.52:6379 192.168.1.52 6379 @ mymaster 192.168.1.54 6379

技术分享

5自带shell脚本方便操作
#!/bin/bash

set_redis()
{
    result=`redis-cli -h 192.168.1.$1 -p 6379 set $2 $3`
    echo "192.168.1.$1:$result"
}

get_redis()
{
   result=`redis-cli -h 192.168.1.$1 -p 6379 get $2`
    echo "192.168.1.$1:$result"
}

get_info()
{
    echo $1
    redis-cli -h 192.168.1.$1 -p 6379 info replication
}

shut_down()
{
    echo $1
    redis-cli -h 192.168.1.$1 -p 6379 shutdown
}

if [ $# -lt 2 ];
then
    echo "ip op a b"
    exit 0
fi

case $2 in
    set)
        set_redis $1 $3 $4
        ;;
    get)
        get_redis $1 $3
        ;;
    info)
        get_info $1
        ;;
    shut)
        shut_down $1
        ;;
    *)
       echo "invalid parameter!..."
       ;;
esac




redis_主从配置以及自动切换

标签:

原文地址:http://blog.csdn.net/aa838260772/article/details/51165948

(0)
(0)
   
举报
评论 一句话评论(0
登录后才能评论!
© 2014 mamicode.com 版权所有  联系我们:gaon5@hotmail.com
迷上了代码!