标签：ftp windows vsftpd 配置文件 centos服务器
近期准备把windows 上的ftp停用了，既然一门心思学CENTOS 正好也有这个需求，那就边学习边搭建一个FTP服务好了，正好实践一下。
rpm -qa |grep vsftp #查看本机是否安装了ftp服务
如果没有安装使用命令进行安装。
yum install -y vsftpd
安装完成使用将ftp服务启动，并将其设置为开机启动：
然后进行ftp配置文件修改，文件位于/etc/vsftpd/vsftpd.conf
chkconfig vsftpd on service vsftpd start
# Example config file /etc/vsftpd/vsftpd.conf 2 # 3 # The default compiled in settings are fairly paranoid. This sample file 4 # loosens things up a bit, to make the ftp daemon more usable. 5 # Please see vsftpd.conf.5 for all compiled in defaults. 6 # 7 # READ THIS: This example file is NOT an exhaustive list of vsftpd options. 8 # Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd‘s 9 # capabilities. 10 # 11 # Allow anonymous FTP? (Beware - allowed by default if you comment this out). 12 anonymous_enable=YES 13 # 14 # Uncomment this to allow local users to log in. 15 local_enable=YES 16 # 17 # Uncomment this to enable any form of FTP write command. 18 write_enable=YES 19 # 20 # Default umask for local users is 077. You may wish to change this to 022, 21 # if your users expect that (022 is used by most other ftpd‘s) 22 local_umask=022 23 # 24 # Uncomment this to allow the anonymous FTP user to upload files. This only 25 # has an effect if the above global write enable is activated. Also, you will 26 # obviously need to create a directory writable by the FTP user. 27 # 允许匿名用户进行上传操作 28 anon_upload_enable=YES 29 # 30 # Uncomment this if you want the anonymous FTP user to be able to create 31 # new directories. 32 # 可以通过匿名用户进行文件夹的创建操作 33 #anon_mkdir_write_enable=YES 34 31 # new directories. 32 # 可以通过匿名用户进行文件夹的创建操作 33 #anon_mkdir_write_enable=YES 34 35 #可以通过匿名用户进行删除文件操作 36 #anon_other_write_enable=YES 37 # 38 # Activate directory messages - messages given to remote users when they 39 # go into a certain directory. 40 dirmessage_enable=YES 41 # 42 # The name of log file when xferlog_enable=YES and xferlog_std_format=YES 43 # WARNING - changing this filename affects /etc/logrotate.d/vsftpd.log 44 xferlog_file=/var/log/vsftpd.log 45 # 46 # The target log file can be vsftpd_log_file or xferlog_file. 47 # This depends on setting xferlog_std_format parameter 48 xferlog_enable=YES 49 # 50 # Switches between logging into vsftpd_log_file and xferlog_file files. 51 # NO writes to vsftpd_log_file, YES to xferlog_file 52 xferlog_std_format=YES 53 # 54 # Make sure PORT transfer connections originate from port 20 (ftp-data). 55 connect_from_port_20=YES 56 # 57 # If you want, you can arrange for uploaded anonymous files to be owned by 58 # a different user. Note! Using "root" for uploaded files is not 59 # recommended! 60 #chown_uploads=YES 61 #chown_username=whoever 62 # 63 # You may change the default value for timing out an idle session. 64 #idle_session_timeout=600 65 # 66 # You may change the default value for timing out a data connection. 67 #data_connection_timeout=120 68 # 69 # It is recommended that you define on your system a unique user which the 70 # ftp server can use as a totally isolated and unprivileged user. 71 #nopriv_user=ftpsecure 72 # 73 # Enable this and the server will recognise asynchronous ABOR requests. Not 74 # recommended for security (the code is non-trivial). Not enabling it, 75 # however, may confuse older FTP clients. 76 #async_abor_enable=YES 77 # 78 # By default the server will pretend to allow ASCII mode but in fact ignore 79 # the request. Turn on the below options to have the server actually do ASCII 80 # mangling on files when in ASCII mode. 81 # Beware that on some FTP servers, ASCII support allows a denial of service 82 # attack (DoS) via the command "SIZE /big/file" in ASCII mode. vsftpd 83 # predicted this attack and has always been safe, reporting the size of the 84 # raw file. 85 # ASCII mangling is a horrible feature of the protocol. 86 #ascii_upload_enable=YES 87 #ascii_download_enable=YES 88 # 89 # You may fully customise the login banner string: 90 #ftpd_banner=Welcome to blah FTP service. 91 # 92 # You may specify a file of disallowed anonymous e-mail addresses. Apparently 93 # useful for combatting certain DoS attacks. 94 #deny_email_enable=YES 95 # (default follows) 96 #banned_email_file=/etc/vsftpd/banned_emails 97 # 98 # You may specify an explicit list of local users to chroot() to their home 99 # directory. If chroot_local_user is YES, then this list becomes a list of 100 # users to NOT chroot(). 101 chroot_local_user=YES 102 #chroot_list_enable=YES 103 # (default follows) 104 #chroot_list_file=/etc/vsftpd/chroot_list 105 # 106 # You may activate the "-R" option to the builtin ls. This is disabled by 107 # default to avoid remote users being able to cause excessive I/O on large 108 # sites. However, some broken FTP clients such as "ncftp" and "mirror" assume 109 # the presence of the "-R" option, so there is a strong case for enabling it. 110 #ls_recurse_enable=YES 111 # 112 # When "listen" directive is enabled, vsftpd runs in standalone mode and 113 # listens on IPv4 sockets. This directive cannot be used in conjunction 114 # with the listen_ipv6 directive. 115 listen=YES 116 # 117 # This directive enables listening on IPv6 sockets. To listen on IPv4 and IPv6 118 # sockets, you must run two copies of vsftpd with two configuration files. 119 # Make sure, that one of the listen options is commented !! 120 #listen_ipv6=YES 121 122 pam_service_name=vsftpd 123 userlist_enable=YES 124 userlist_deny=NO 125 #userlist_enable 与userlist_deny同时使用方可生效,deny为YES时userlist文件中的用户无法登录ftp,相反则仅允许文件中的用户登录ftp 126 tcp_wrappers=YES 127 #max_clients=300 128 #设置同时访问FTP的最大客户端数量 129 #max_per_ip=10 130 #设置单个IP地址同时连接FTP服务的最大数
设置完毕后重启vsftpd服务
service vsftpd restart
创建ftp登录用户：
useradd -d /ftp/ftpuser/ -s /sbin/nologin ftpuser #创建用户，设置起家目录为/ftp/ftpuser，默认shell为/sbin/nologin (因为默认该用户是不允许登录linux系统的) echo "passwd" |passwd --stdin ftpuser #设置ftpuser用户密码为passwd
在 配置文件124行使用了userlist_deny=NO选项，则无论匿名用户anonymous是否启用都是无法登录的，这时候如果需要登录则需要配置/etc/vsftpd/目录下的user_list文件，将需要登录ftp服务器的用户加入其中即可。
将之前添加的ftpuser用户添加到user_list文件中即可登录。
一个较为简单的ftp服务器就搭建完毕了，查阅网上一些资料说ftp验证过程都是明文的安全性会差一些，过后再慢慢加吧，先满足需求后续修改吧（主要是还没搞明白加密o(╯□╰)o）。
本文出自 “积小流，成江海” 博客，请务必保留此出处http://goodjoe.blog.51cto.com/9173556/1771256
标签：ftp windows vsftpd 配置文件 centos服务器
原文地址：http://goodjoe.blog.51cto.com/9173556/1771256
