码迷,mamicode.com
首页 > 其他好文 > 详细

emqtt 4 (我要publish消息了)

时间:2016-05-09 14:15:35      阅读:202      评论:0      收藏:0      [点我收藏+]

标签:

这次,分析处理publish msg的流程。

由protocol开始

publish 类型的packet的处理是:

 1 process(Packet = ?PUBLISH_PACKET(_Qos, Topic, _PacketId, _Payload), State) ->
 2     %% ACL check
 3     ...
 4     publish(Packet, State);
 5     ...
 6 publish(Packet = ?PUBLISH_PACKET(?QOS_0, _PacketId),
 7         #proto_state{client_id = ClientId, username = Username, session = Session}) ->
 8     %% 处理packet 获得msg
 9     Msg = emqttd_message:from_packet(Username, ClientId, Packet),
10     %% 调用emqttd_session module的publish/2 函数
11     %% subscribe的时候,也是由protocol 进入的emqttd_session module
12     emqttd_session:publish(Session, Msg);

1、ACL 检查

2、处理packet 获得msg

3、调用session module进行处理

emqttd_session 模块处理

和subscribe的处理流程类似,emqttd_session:publish/2 也只是一个接口函数,该函数要根据QoS的不同,决定是

  1. 自己调用后续函数完成处理
  2. call session process 完成后续处理
 1 %% @doc Publish message
 2 -spec(publish(pid(), mqtt_message()) -> ok | {error, any()}).
 3 publish(_SessPid, Msg = #mqtt_message{qos = ?QOS_0}) ->
 4     %% publish qos0 directly
 5     emqttd:publish(Msg);
 6 publish(_SessPid, Msg = #mqtt_message{qos = ?QOS_1}) ->
 7     %% publish qos1 directly, and client will puback automatically
 8     emqttd:publish(Msg);
 9 publish(SessPid, Msg = #mqtt_message{qos = ?QOS_2}) ->
10     %% publish qos2 by session 
11     gen_server2:call(SessPid, {publish, Msg}, ?PUBSUB_TIMEOUT). 

直接处理

如果是自己调用后续函数完成处理的话,则继续调用emqttd:publish/2,则在emqttd module 中继续调用emqttd_server:publish/1:

%% @doc Publish a Message
-spec(publish(Msg :: mqtt_message()) -> any()).
publish(Msg = #mqtt_message{from = From}) ->
    ...
    %% 处理topic
    ...
    %% pulish
    emqttd_pubsub:publish(Topic, Msg2),
    ...

 

还是subscribe处理套路:

emqttd_protocol ---> emqttd_session ---> emqttd ---> emqttd_server ---> emqttd_pubsub

在emqttd_pubsub module中的处理是:

 1 %% @doc Publish message to Topic.
 2 -spec(publish(binary(), any()) -> any()).
 3 publish(Topic, Msg) ->
 4     lists:foreach(
 5         fun(#mqtt_route{topic = To, node = Node}) when Node =:= node() ->
 6             ?MODULE:dispatch(To, Msg);
 7            (#mqtt_route{topic = To, node = Node}) ->
 8             rpc:cast(Node, ?MODULE, dispatch, [To, Msg])
 9         end, emqttd_router:lookup(Topic)).
10 
11 dispatch(Topic, Msg) ->
12     case subscribers(Topic) of
13         [] ->
14             dropped(Topic);
15         [SubPid] ->
16             SubPid ! {dispatch, Topic, Msg};
17         SubPids ->
18             lists:foreach(fun(SubPid) ->
19                 SubPid ! {dispatch, Topic, Msg}
20             end, SubPids)
21     end.
22 %% @private
23 %% @doc Find all subscribers
24 subscribers(Topic) ->
25     case ets:member(subscriber, Topic) of
26         true -> %% faster then lookup?
27             try ets:lookup_element(subscriber, Topic, 2) catch error:badarg -> [] end;
28         false ->
29             []
30     end.

 

至此,msg 就已经以{dispatch, Topic, Msg}的形式发送给 clientid 对应的session process了。

那么,就需要在emqttd_session module中的handle_info callback 函数处进行处理:

 1 %% Dispatch Message
 2 handle_info({dispatch, Topic, Msg}, Session = #session{subscriptions = Subscriptions})
 3     when is_record(Msg, mqtt_message) ->
 4     dispatch(tune_qos(Topic, Msg, Subscriptions), Session);
 5 
 6 %% Deliver qos0 message directly to client
 7 dispatch(Msg = #mqtt_message{qos = ?QOS0}, Session = #session{client_pid = ClientPid}) ->
 8     ClientPid ! {deliver, Msg},
 9     hibernate(Session);
10 dispatch(Msg = #mqtt_message{qos = QoS}, Session = #session{message_queue = MsgQ})
11     when QoS =:= ?QOS1 orelse QoS =:= ?QOS2 ->
12     case check_inflight(Session) of
13         true  ->
14             noreply(deliver(Msg, Session));
15         false ->
16             hibernate(Session#session{message_queue = emqttd_mqueue:in(Msg, MsgQ)})
17     end.

 

继而,将信息发送给socket controlling process,然后根据QoS的不同,判断是否需要等待ack。

总结

(流程示意图待补)

emqtt 4 (我要publish消息了)

标签:

原文地址:http://www.cnblogs.com/--00/p/emqtt_learning_publish_msg.html

(0)
(0)
   
举报
评论 一句话评论(0
登录后才能评论!
© 2014 mamicode.com 版权所有  联系我们:gaon5@hotmail.com
迷上了代码!