标签：lemmp
本实验用到的架构图，如下所示：
简单介绍本次实验架构的数据流向：
首先client向A服务器发起网页请求，A接到请求，首先查看memcached是否有请求的内容，如果有就返回给client,如果memcached中没有，则A查询B服务器中client的请求响应缓存到memcached中一份，同时再响应给客户端，如果在一定时长内，client再次发起的同样的请求，A服务器直接将缓存响应给client，简单理解。
环境安装
A服务器安装memcached
yum install -y memcached
查看安装后的内容为：
[root@node5 ~]# rpm -ql memcached /etc/rc.d/init.d/memcached ##sysV风格服务启动脚本 /etc/sysconfig/memcached ##软件默认配置文件 /usr/bin/memcached ##可执行文件（后面简单介绍使用方法） /usr/bin/memcached-tool ##可执行文件（后面简单介绍使用方法） /usr/share/doc/memcached-1.4.4 /usr/share/doc/memcached-1.4.4/AUTHORS /usr/share/doc/memcached-1.4.4/CONTRIBUTORS /usr/share/doc/memcached-1.4.4/COPYING /usr/share/doc/memcached-1.4.4/ChangeLog /usr/share/doc/memcached-1.4.4/NEWS /usr/share/doc/memcached-1.4.4/README /usr/share/doc/memcached-1.4.4/protocol.txt /usr/share/doc/memcached-1.4.4/readme.txt /usr/share/doc/memcached-1.4.4/threads.txt /usr/share/man/man1/memcached.1.gz /var/run/memcached #运行时信息存放目录，pid文件
查看/etc/sysconfig/memcached
[root@node5 ~]# cat /etc/sysconfig/memcached PORT="11211" #memcache默认端口 USER="memcached" #默认用户 MAXCONN="1024" #最大缓存的链接数，通常要此参数修改 CACHESIZE="64" #缓存所占用的内存空间，单位为Mb,通常要修改 OPTIONS=""
B服务器的软件安装
nginx软件安装具体版本为nginx-1.4.7
# groupadd -r nginx # useradd -r -g nginx nginx # ./configure --prefix=/usr/local/nginx --sbin-path=/usr/local/nginx/sbin/nginx --conf-path=/etc/nginx/nginx.conf --error-log-path=/var/log/nginx/error.log --http-log-path=/var/log/nginx/access.log --pid-path=/var/run/nginx/nginx.pid --lock-path=/var/lock/nginx.lock --user=nginx --group=nginx --with-http_ssl_module --with-http_flv_module --with-http_stub_status_module --with-http_gzip_static_module --http-client-body-temp-path=/var/tmp/nginx/client/ --http-proxy-temp-path=/var/tmp/nginx/proxy/ --http-fastcgi-temp-path=/var/tmp/nginx/fcgi/ --http-uwsgi-temp-path=/var/tmp/nginx/uwsgi --http-scgi-temp-path=/var/tmp/nginx/scgi --with-pcre # make && make install
增加nginx启动脚本
#vim /etc/rc.d/init.d/nginx
#增加以下内容
#!/bin/sh
#
# nginx - this script starts and stops the nginx daemon
#
# chkconfig: - 85 15
# description: Nginx is an HTTP(S) server, HTTP(S) reverse # proxy and IMAP/POP3 proxy server
# processname: nginx
# config: /etc/nginx/nginx.conf
# config: /etc/sysconfig/nginx
# pidfile: /var/run/nginx.pid
# Source function library.
. /etc/rc.d/init.d/functions
# Source networking configuration.
. /etc/sysconfig/network
# Check that networking is up.
[ "$NETWORKING" = "no" ] && exit 0
nginx="/usr/sbin/nginx"
prog=$(basename $nginx)
NGINX_CONF_FILE="/etc/nginx/nginx.conf"
[ -f /etc/sysconfig/nginx ] && . /etc/sysconfig/nginx
lockfile=/var/lock/subsys/nginx
make_dirs() {
# make required directories
user=`nginx -V 2>&1 | grep "configure arguments:" | sed ‘s/[^*]*--user=\([^ ]*\).*/\1/g‘ -`
options=`$nginx -V 2>&1 | grep ‘configure arguments:‘`
for opt in $options; do
if [ `echo $opt | grep ‘.*-temp-path‘` ]; then
value=`echo $opt | cut -d "=" -f 2`
if [ ! -d "$value" ]; then
# echo "creating" $value
mkdir -p $value && chown -R $user $value
fi
fi
done
}
start() {
[ -x $nginx ] || exit 5
[ -f $NGINX_CONF_FILE ] || exit 6
make_dirs
echo -n $"Starting $prog: "
daemon $nginx -c $NGINX_CONF_FILE
retval=$?
echo
[ $retval -eq 0 ] && touch $lockfile
return $retval
}
stop() {
echo -n $"Stopping $prog: "
killproc $prog -QUIT
retval=$?
echo
[ $retval -eq 0 ] && rm -f $lockfile
return $retval
}
restart() {
configtest || return $?
stop
sleep 1
start
}
reload() {
configtest || return $?
echo -n $"Reloading $prog: "
killproc $nginx -HUP
RETVAL=$?
echo
}
force_reload() {
restart
}
configtest() {
$nginx -t -c $NGINX_CONF_FILE
}
rh_status() {
status $prog
}
rh_status_q() {
rh_status >/dev/null 2>&1
}
case "$1" in
start)
rh_status_q && exit 0
$1
;;
stop)
rh_status_q || exit 0
$1
;;
restart|configtest)
$1
;;
reload)
rh_status_q || exit 7
$1
;;
force-reload)
force_reload
;;
status)
rh_status
;;
condrestart|try-restart)
rh_status_q || exit 0
;;
*)
echo $"Usage: $0 {start|stop|status|restart|condrestart|try-restart|reload|force-reload|configtest}"
exit 2
esac后续操作
# chmod +x /etc/rc.d/init.d/nginx #加执行权限 # chkconfig --add nginx #加到服务列表 # chkconfig nginx on #开机自启 # service nginx start 测试启动
安装php-fpm，让php工作于（简单）服务器模式，具体版本php-5.4.26
#yum groupinstall -y "Development Tools" "Server Platform Developments" "Server Platform Development" #解决php安装过程中的包依赖 #tar -xf php-5.4.26.tar.bz2 #cd php-5.4.26 #./configure --prefix=/usr/local/php --with-mysql=/usr/local/mysql --with-openssl --enable-fpm --enable-sockets --enable-sysvshm --with-mysqli=/usr/local/mysql/bin/mysql_config --enable-mbstring --with-freetype-dir --with-jpeg-dir --with-png-dir --with-zlib-dir --with-libxml-dir=/usr --enable-xml --with-mhash --with-mcrypt --with-config-file-path=/etc --with-config-file-scan-dir=/etc/php.d --with-bz2 --with-curl
提供php配置文件
# cp php.ini-production /etc/php.ini
增加php-fpm服务启动脚本，并添加至服务列表
# cp sapi/fpm/init.d.php-fpm /etc/rc.d/init.d/php-fpm # chmod +x /etc/rc.d/init.d/php-fpm # chkconfig --add php-fpm # chkconfig php-fpm on
修改php-fpm提供的配置文件
# cp /usr/local/php/etc/php-fpm.conf.default /usr/local/php/etc/php-fpm.conf
调整php-fpm相关的参数，如下所示：
#cd /usr/local/php/etc ##############最修改的结果如下所示################# [root@node3 etc]# grep -v ‘^$‘ php-fpm.conf |grep -v ‘^;‘|grep -v ‘^[[:space:]].*‘ [global] pid = /usr/local/php/var/run/php-fpm.pid error_log = /var/log/php-fpm.log [www] user = nobody group = nobody listen = 127.0.0.1:9000 pm = dynamic pm.max_children = 128 pm.start_servers = 5 pm.min_spare_servers = 3 pm.max_spare_servers = 5 pm.max_requests = 500 pm.status_path = /status ping.path = /ping ping.response = pong rlimit_files = 10240
启动服务
# service php-fpm start
nginx与php5的整合
编辑/etc/nginx/nginx.conf，启用如下选项
只显示修改后的内容
方式
[root@node3 nginx]# grep -v ‘^[[:space:]].*#‘ nginx.conf |grep -v ‘^$‘
worker_processes 1; #默认启动的进程线
events {
worker_connections 1024;#连接并发数
}
http {
include mime.types; #支持的文件类型
default_type application/octet-stream;
sendfile on; #支持直接从内核空间返回响应给客户
keepalive_timeout 65; #长连接时长
fastcgi_cache_path /tmp levels=1:2 keys_zone=fcgi:50m max_size=1g inactive=12h;
##缓存文件存放路径，目录层次（目录结构），定义键值域名称 最大缓存空间1G，非活动时间12小时
server {
listen 80; #监听端口
server_name www.mytest.com; #虚拟主机
location / { URL上下言语
root /mydata/htdocshare; #htdoc在本地系统的路径
index index.php index.html index.htm; 默认首页索引文件
}
error_page 500 502 503 504 /50x.html; #不同出错代码所做出的网页跳转后显示的页面
location = /50x.html { #定义具体的出错页面路径
root html;
}
location ~* /(status|ping) { #完全匹配字符
root /mydata/htdocshare; #匹配后跳转路径及处理方式
fastcgi_pass 127.0.0.1:9000;
fastcgi_param SCRIPT_FILENAME /$fastcgi_script_name;
auth_basic "admin area"; #认证提示框信息
auth_basic_user_file /etc/nginx/.htpswd; #引用存放用户名称的文件
include fastcgi_params; #引用此文件中变量，此文件内容可以简单理解为nginx中的变量与fastcgi中的变量的一一对应关系（名称），从nginx传递过来的变量，fastcgi可以理解并认识
}
location ~ \.php$ { #用户访问php页面时所做出的处理方式，转给fastcgit程序处理
root /mydata/htdocshare;
fastcgi_pass 127.0.0.1:9000; #php-fpm监听的路径与端口
fastcgi_index index.php; #索引页
fastcgi_param SCRIPT_FILENAME /scripts$fastcgi_script_name;
include fastcgi_params;
}
}
}编辑/etc/nginx/fastcgi_params，将其内容更改为如下内容，此文件作用就是fastcgi中的变量与nginx中的变量能够相互转换。
fastcgi_param GATEWAY_INTERFACE CGI/1.1; fastcgi_param SERVER_SOFTWARE nginx; fastcgi_param QUERY_STRING $query_string; fastcgi_param REQUEST_METHOD $request_method; fastcgi_param CONTENT_TYPE $content_type; fastcgi_param CONTENT_LENGTH $content_length; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; fastcgi_param SCRIPT_NAME $fastcgi_script_name; fastcgi_param REQUEST_URI $request_uri; fastcgi_param DOCUMENT_URI $document_uri; fastcgi_param DOCUMENT_ROOT $document_root; fastcgi_param SERVER_PROTOCOL $server_protocol; fastcgi_param REMOTE_ADDR $remote_addr; fastcgi_param REMOTE_PORT $remote_port; fastcgi_param SERVER_ADDR $server_addr; fastcgi_param SERVER_PORT $server_port; fastcgi_param SERVER_NAME $server_name;
安装xcache为PH加速
# tar xf xcache-3.1.0.tar.bz2 # cd xcache-3.1.0 # /usr/local/php/bin/phpize # ./configure --enable-xcache --with-php-config=/usr/local/php/bin/php-config # make && make install
安装完出现类似如下行： Installing shared extensions: /usr/local/php/lib/php/extensions/no-debug-zts-20100525/
首先将xcache提供的样例配置导入php.ini # # cp /software/xcache-3.1.0/xcache.ini /etc/php.d 接下来编辑xcache.ini 文件增加以下内容 zend_extension = /usr/local/php/lib/php/extensions/no-debug-zts-20100525/xcache.so
MariaDB安装
#useradd -r mysql #mkdir /mydata/data -pv #chown -R mysql.mysql /mydata/data #tar -xf mariadb-10.0.10-linux-x86_64.tar.gz -C /usr/local #cd /usr/local #ln -sv mariadb-10.0.10-linux-x86_64 mysql #cd mysql #chown -R root.mysql ./* #scripts/mysql_install_db --datadir=/mydata/data --user=mysql # cd /usr/local/mysql # cp support-files/my-large.cnf /etc/my.cnf ##编辑my.cnf,增加以下内容 innodb_file_per_table=on datadir = /mydata/data 为mysql增加服务启动脚本 # cd /usr/local/mysql # cp support-files/mysql.server /etc/rc.d/init.d/mysqld # chkconfig --add mysqld # chkconfig mysqld on 启动mysql service mysqld start
新建测试页面来测试缓存服务器是否起作用
<?php
$mem = new Memcache;
$mem->connect("172.16.251.24", 11211) or die("Could not connect");
$version = $mem->getVersion();
echo "Server‘s version: ".$version."<br/>\n";
$mem->set(‘hellokey‘, ‘Hello World‘, 0, 600) or die("Failed to save data at the memcached server");
echo "Store data in the cache (data will expire in 600 seconds)<br/>\n";
$get_result = $mem->get(‘hellokey‘);
echo "$get_result is from memcached server.";
?>标签：lemmp
原文地址：http://onlywyn.blog.51cto.com/204565/1406872
