标签：lvs
实验拓扑：
实验准备：
CentOS6.5-x86-64
node1 10.0.0.11 软件：ipvsadm+keepalived 角色：Director1 node2 10.0.0.12 软件：ipvsadm+keepalived 角色：Director2 node3 10.0.0.13 软件：nginx 角色：Realerver1 node4 10.0.0.14 软件：nginx 角色：Realerver2 |
一、在两台Director上安装配置ipvsadm和keepalived
1、安装ipvsadm
# yum install ipvsadm -y # ipvsadm -v ipvsadm v1.26 2008/5/15 (compiled with popt and IPVS v1.2.1)
2、安装keepalived
# sh hm-keepalived-install.sh （keepalived安装脚本）
#!/bin/bash
kernel=/usr/src/kernels/$(uname -r)
yum install gcc gcc-c++ pcre-devel openssl-devel popt-devel libnl-devel libnfnetlink libnfnetlink-devel -y
[ -e keepalived-1.2.23.tar.gz ] || wget http://www.keepalived.org/software/keepalived-1.2.23.tar.gz
tar -zxf keepalived-1.2.23.tar.gz && cd keepalived-1.2.23 &&
./configure --prefix=/usr/local/keepalived --sysconf=/etc --with-kernel-dir=${kernel}
make && make install
chkconfig --add keepalived && chkconfig keepalived on
ln -s /usr/local/keepalived/sbin/keepalived /usr/sbin/三、在两台Realserver上安装配置nginx
# sh hm-nginx-install.sh（nginx安装脚本，只需将nginx源码包放到/usr/local/src目录下，执行即可）
#!/bin/bash
nginx_s=/usr/local/src/nginx-1.8.1.tar.gz
nginx_v=nginx-1.8.1
for p in gcc gcc-c++ zlib pcre pcre-devel openssl openssl-devel
do
if ! rpm -qa | grep -q "^$p";then
yum install -y $p
fi
done
if [ ! -d /etc/nginx -o ! -e /usr/sbin/nginx ];then
useradd -s /sbin/nologin nginx -M
cd /usr/local/src && tar -zxf ${nginx_s} -C . && cd $nginx_v &&
./configure --user=nginx --group=nginx --prefix=/usr/local/nginx --sbin-path=/usr/sbin/nginx --conf-path=/etc/nginx/nginx.conf --pid-path=/var/run/nginx.pid --lock-path=/var/lock/subsys/nginx --with-http_stub_status_module --with-http_ssl_module --with-http_gzip_static_module --http-log-path=/var/log/nginx/access.log --error-log-path=/var/log/nginx/error.log --http-client-body-temp-path=/tmp/nginx/client_body --http-proxy-temp-path=/tmp/nginx/proxy --http-fastcgi-temp-path=/tmp/nginx/fastcgi --with-http_degradation_module --with-http_realip_module --with-http_addition_module --with-http_sub_module --with-pcre
make && make install
chown -R nginx:nginx /usr/local/nginx && mkdir /tmp/nginx/client_body -p && mkdir /etc/nginx/vhosts
# nginx.conf
cat > /etc/nginx/nginx.conf << EOF
user nginx nginx;
worker_processes $(cat /proc/cpuinfo | grep ‘processor‘ | wc -l);
error_log /var/log/nginx/error.log notice;
pid /var/run/nginx.pid;
worker_rlimit_nofile 65535;
events
{
use epoll;
worker_connections 65535;
}
http
{
include mime.types;
default_type application/octet-stream;
server_names_hash_bucket_size 2048;
server_names_hash_max_size 2048;
log_format main ‘\$HTTP_X_REAL_IP - \$remote_user [\$time_local] "\$request" ‘
‘\$status \$body_bytes_sent "\$http_referer" "\$request_time"‘
‘"\$http_user_agent" \$HTTP_X_Forwarded_For‘;
sendfile on;
tcp_nopush on;
tcp_nodelay on;
keepalive_timeout 60;
client_header_timeout 3m;
client_body_timeout 3m;
client_max_body_size 10m;
client_body_buffer_size 256k;
send_timeout 3m;
connection_pool_size 256;
client_header_buffer_size 32k;
large_client_header_buffers 4 64k;
request_pool_size 4k;
output_buffers 4 32k;
postpone_output 1460;
client_body_temp_path /tmp/nginx/client_body;
proxy_temp_path /tmp/nginx/proxy;
fastcgi_temp_path /tmp/nginx/fastcgi;
gzip on;
gzip_min_length 1k;
gzip_buffers 4 16k;
gzip_comp_level 3;
gzip_http_version 1.1;
gzip_types text/plain application/x-javascript text/css text/htm application/xml;
gzip_vary on;
fastcgi_connect_timeout 300;
fastcgi_send_timeout 300;
fastcgi_read_timeout 300;
fastcgi_buffer_size 64k;
fastcgi_buffers 4 64k;
fastcgi_busy_buffers_size 128k;
fastcgi_temp_file_write_size 128k;
fastcgi_intercept_errors on;
include vhosts/*.conf;
}
EOF
# nginx_vhosts.conf
cat > /etc/nginx/vhosts/www.conf << EOF
server {
listen 80;
server_name $(ifconfig eth0 | awk -F"[ :]+" ‘/inet addr/{print $4}‘);
index index.html index.htm index.php index.jsp;
charset UTF8;
root /data/www/html;
access_log /var/log/nginx/access.log main;
}
EOF
mkdir /data/www/html -p && echo $(ifconfig eth0 | awk -F"[ :]+" ‘/inet addr/{print $4}‘) > /data/www/html/index.html
/usr/sbin/nginx -t && /usr/sbin/nginx
echo
echo "--------------------------------"
echo "Install ${nginx_v} success"
echo "Test http://$(ifconfig eth0 | awk -F"[ :]+" ‘/inet addr/{print $4}‘)"
else
echo "Already installed ${nginx_v}"
fi四、在两台Director上配置keepalived
1、配置keepalived
# vim /etc/keepalived/keepalived.conf
! Configuration File for keepalived
global_defs {
notification_email {
mail@huangming.org
741616710@qq.com
}
notification_email_from keepalived@localhost
smtp_server 127.0.0.1
smtp_connect_timeout 30
router_id LVS_HA
}
vrrp_instance LVS_HA {
state BACKUP # 主备服务器均为BACKUP
interface eth0 # 指定keepalived监听网络的接口
virtual_router_id 81 # ID标识，master和backup保持一致
priority 100 # backup为90
advert_int 2 # master和backup之间检查同步的时间间隔
nopreempt # 不抢占模式，仅在master上设置
authentication {
auth_type PASS
auth_pass 1111
}
virtual_ipaddress {
10.0.0.20/24 dev eth0 # VIP，可以设置多个，每行一个
}
}
virtual_server 10.0.0.20 80 { # (LVS配置)
delay_loop 5 # (每隔5秒查询realserver状态)
lb_algo wlc # (lvs算法)
lb_kind DR # (lvs负载均衡模式)
persistence_timeout 0 # (保持会话时间，0表示永久保持)
persistence_granularity 255.255.255.255 # (持久连接的粒度，默认为4个255，即一个单独的客户端IP分配到一个Realserver上)
protocol TCP # (转发的协议类型，TCP或UDP)
sorry_server 10.0.0.11 8080 # (备用Realserver节点，当所有的realserver节点失效后，将启用这个节点)
real_server 10.0.0.13 80 { # Realserver
weight 2 # (调度权重)
HTTP_GET { # (健康检测方式)
url { # (指定检测的url，可以指定多个)
path /index.html # (url详细路径)
status_code 200
}
connect_port 80 # (检查的端口)
#bindto 10.0.0.20 # (表示通过此地址来发送请求对服务器进行健康检查)
connect_timeout 3 # (无响应超时时间)
nb_get_retry 3 # (失败重试次数)
delay_before_retry 1 # (重试时间间隔)
}
}
real_server 10.0.0.14 80 {
weight 2 # (调度权重)
HTTP_GET { # (健康检测方式)
url { # (指定检测的url，可以指定多个)
path /index.html # (url详细路径)
status_code 200
}
connect_port 80 # (检查的端口)
#bindto 10.0.0.20 # (表示通过此地址来发送请求对服务器进行健康检查)
connect_timeout 3 # (无响应超时时间)
nb_get_retry 3 # (失败重试次数)
delay_before_retry 1 # (重试时间间隔)
}
}2、分别启动keepalived服务
[root@node1 ~]# service keepalived start [root@node2 ~]# service keepalived start [root@node1 ~]# ps aux | grep keepalived root 4008 0.0 0.1 44928 1080 ? Ss 19:01 0:00 keepalived -D root 4009 0.1 0.2 47152 2332 ? S 19:01 0:00 keepalived -D root 4010 0.1 0.1 47032 1608 ? S 19:01 0:00 keepalived -D root 4018 0.0 0.0 103256 864 pts/0 S+ 19:03 0:00 grep keepalived
3、查看LVS状态
# master上 [root@node1 ~]# ipvsadm -L -n IP Virtual Server version 1.2.1 (size=4096) Prot LocalAddress:Port Scheduler Flags -> RemoteAddress:Port Forward Weight ActiveConn InActConn TCP 10.0.0.20:80 wlc persistent 0 -> 10.0.0.13:80 Route 2 0 0 -> 10.0.0.14:80 Route 2 0 0 # backup上 [root@node2 ~]# ipvsadm -L -n IP Virtual Server version 1.2.1 (size=4096) Prot LocalAddress:Port Scheduler Flags -> RemoteAddress:Port Forward Weight ActiveConn InActConn TCP 10.0.0.20:80 wlc persistent 0 -> 10.0.0.13:80 Route 2 0 0 -> 10.0.0.14:80 Route 2 0 0
4、查看VIP（VIP默认分配在priority权值高的Director上）
[root@node1 ~]# ip addr 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 00:0c:29:5a:9d:e0 brd ff:ff:ff:ff:ff:ff inet 10.0.0.11/24 brd 10.0.0.255 scope global eth0 inet 10.0.0.20/24 scope global secondary eth0 inet6 fe80::20c:29ff:fe5a:9de0/64 scope link valid_lft forever preferred_lft forever
五、在两台Realserver上分别在回环接口上配置vip和关闭arp转发
# 查看系统默认arp规则 [root@node3 ~]# cat /proc/sys/net/ipv4/conf/lo/arp_ignore 0 [root@node3 ~]# cat /proc/sys/net/ipv4/conf/lo/arp_announce 0 [root@node3 ~]# cat /proc/sys/net/ipv4/conf/all/arp_ignore 0 [root@node3 ~]# cat /proc/sys/net/ipv4/conf/all/arp_announce 0 在两台Realserver上执行以下脚本 # lvs_dr_rs.sh #!/bin/bash vip=10.0.0.20 ifconfig lo:0 $vip broadcast $vip netmask 255.255.255.255 up route add -host $vip lo:0 echo "1" > /proc/sys/net/ipv4/conf/lo/arp_ignore echo "2" > /proc/sys/net/ipv4/conf/lo/arp_announce echo "1" > /proc/sys/net/ipv4/conf/all/arp_ignore echo "2" > /proc/sys/net/ipv4/conf/all/arp_announce [root@node3 ~]# ip a 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet 10.0.0.20/32 brd 10.0.0.20 scope global lo:0 inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 00:0c:29:c5:b4:19 brd ff:ff:ff:ff:ff:ff inet 10.0.0.13/24 brd 10.0.0.255 scope global eth0 inet6 fe80::20c:29ff:fec5:b419/64 scope link valid_lft forever preferred_lft forever [root@node4 ~]# ip a 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet 10.0.0.20/32 brd 10.0.0.20 scope global lo:0 inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 00:0c:29:42:34:4f brd ff:ff:ff:ff:ff:ff inet 10.0.0.14/24 brd 10.0.0.255 scope global eth0 inet6 fe80::20c:29ff:fe42:344f/64 scope link valid_lft forever preferred_lft forever
六、测试LVS负载功能
# 这里分别在node3和node4上访问VIP，在我的keepalived配置里我配置了wlc最小连接调度算法， 和权值为2，所以访问的效果如下 [root@node3 ~]# curl http://10.0.0.20 10.0.0.13 [root@node3 ~]# curl http://10.0.0.20 10.0.0.13 [root@node4 ~]# curl http://10.0.0.20 10.0.0.14 [root@node4 ~]# curl http://10.0.0.20 10.0.0.14
七、测试主Director故障，看是否实现故障转移（vip转至backup上）
# 关闭主Director的keepalived服务 [root@node1 ~]# service keepalived stop Stopping keepalived: [ OK ] # 查看BACKUP的ip [root@node2 ~]# ip a 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 00:0c:29:42:43:20 brd ff:ff:ff:ff:ff:ff inet 10.0.0.12/24 brd 10.0.0.255 scope global eth0 inet 10.0.0.20/24 scope global secondary eth0 inet6 fe80::20c:29ff:fe42:4320/64 scope link valid_lft forever preferred_lft forever # 测试是否还能正常通过vip访问web服务 [root@node3 ~]# curl http://10.0.0.20 10.0.0.13 [root@node3 ~]# curl http://10.0.0.20 10.0.0.13 [root@node4 ~]# curl http://10.0.0.20 10.0.0.14 [root@node4 ~]# curl http://10.0.0.20 10.0.0.14
八、在Realserver配置DR模式启动服务脚本
# cat lvs-dr-rs.service
#!/bin/bash
. /etc/rc.d/init.d/functions
vip=10.0.0.20
RETVAL=$?
case "$1" in
start)
echo "Start realserver"
ifconfig lo:0 $vip broadcast $vip netmask 255.255.255.255 up
route add -host $vip dev lo:0
echo "1" > /proc/sys/net/ipv4/conf/lo/arp_ignore
echo "2" > /proc/sys/net/ipv4/conf/lo/arp_announce
echo "1" > /proc/sys/net/ipv4/conf/all/arp_ignore
echo "2" > /proc/sys/net/ipv4/conf/all/arp_announce
;;
stop)
echo "Stop realserver"
ifconfig lo:0 down
echo "0" > /proc/sys/net/ipv4/conf/lo/arp_ignore
echo "0" > /proc/sys/net/ipv4/conf/lo/arp_announce
echo "0" > /proc/sys/net/ipv4/conf/all/arp_ignore
echo "0" > /proc/sys/net/ipv4/conf/all/arp_announce
;;
*)
echo Usage: $0 {start|stop}
exit 1
esac
exit $RETVAL标签：lvs
原文地址：http://7424593.blog.51cto.com/7414593/1827548
