标签：
@Target(value=TYPE)
@Retention(value=RUNTIME)
@Documented
@Component
public @interface Configuration
Indicates that a class declares one or more @Bean methods and may be processed by the Spring container to generate bean definitions and service requests for those beans at runtime, for example:
标示一个类声明了一个或多个 @Bean 方法，并且可以被 Spring 容器处理，在运行时为这些 beans 产生 bean definations 和服务请求，例如：
@Configuration
public class AppConfig {
@Bean
public MyBean myBean() {
// instantiate, configure and return bean ...
// 实例化，配置和返回 bean
}
}
Bootstrapping @Configuration classes
启动 @Configuration 类
Via AnnotationConfigApplicationContext
通过 AnnotationConfigApplicationContext
@Configuration classes are typically bootstrapped using either AnnotationConfigApplicationContext or its web-capable variant, AnnotationConfigWebApplicationContext. A simple example with the former follows:
@Configuration 类通常使用 AnnotationConfigApplicationContext 或它的 Web 变体 AnnotationConfigWebApplicationContext 来启动。下面是使用前者的一个简单例子：
AnnotationConfigApplicationContext ctx = new AnnotationConfigApplicationContext();
ctx.register(AppConfig.class);
ctx.refresh();
MyBean myBean = ctx.getBean(MyBean.class);
// use myBean ...
See AnnotationConfigApplicationContext Javadoc for further details and see AnnotationConfigWebApplicationContext for web.xml configuration instructions.
从 AnnotationConfigApplicationContext javaDoc 中查看更多详细说明，查看 AnnotationConfigWebApplicationContext 的 web.xml 的配置介绍。
Via Spring <beans> XML
通过 Spring <beans> XML
As an alternative to registering @Configuration classes directly against an AnnotationConfigApplicationContext, @Configuration classes may be declared as normal <bean> definitions within Spring XML files:
作为 AnnotationConfigApplicationContext 直接注册 @Configuration 类的替代，@Configuration 类可以作为一个普通 <bean> definations 在 Spring XML 文件中声明：
<beans>
<context:annotation-config/>
<bean class="com.acme.AppConfig"/>
</beans>
In the example above, <context:annotation-config/> is required in order to enable ConfigurationClassPostProcessor and other annotation-related post processors that facilitate handling @Configuration classes.
在上面的例子中，为了启用处理 @Configuration 类的 ConfigurationClassPostProcessor 和其他注解相关的 post processors 需要在 Spring XML 文件中声明 <context:annotation-config/> 。
Via component scanning
通过组件扫描
@Configuration is meta-annotated with @Component, therefore @Configuration classes are candidates for component scanning (typically using Spring XML‘s <context:component-scan/> element) and therefore may also take advantage of @Autowired/@Inject at the field and method level (but not at the constructor level).
@Configuration 使用了 @Component 注解元数据，因此 @Configuration 是组件扫描的候选（通常使用 Spring XML 的 <context:component-scan/> 元素）因此也可以在字段和方法级别使用 @Autowired/@Inject（但是不能用在构造器级别）。
@Configuration classes may not only be bootstrapped using component scanning, but may also themselves configure component scanning using the @ComponentScan annotation:
@Configuration 类不仅能通过组件扫描启用，而且他们也可以使用 @ComponentScan 注解配置组件扫描：
@Configuration
@ComponentScan("com.acme.app.services")
public class AppConfig {
// various @Bean definitions ...
// 多个 @Bean definations
}
See the @ComponentScan javadoc for details.
参看 @ComponentScan javadoc 获取详细信息。
Working with externalized values
跟外化值一块使用
Using the Environment API
使用 Enviroment API
Externalized values may be looked up by injecting the Spring Environment into a @Configuration class using the @Autowired or the @Inject annotation:
外化值可以通过注入 Spring Enviroment 来查找并通过使用 @Autowired 或 @Inject 注解置入 @Configuration 类中。
@Configuration
public class AppConfig {
@Inject Environment env;
@Bean
public MyBean myBean() {
MyBean myBean = new MyBean();
myBean.setName(env.getProperty("bean.name"));
return myBean;
}
}
Properties resolved through the Environment reside in one or more "property source" objects, and @Configuration classes may contribute property sources to the Environment object using the @PropertySources annotation:
通过 Enviroment 处理的属性位于一个或多个 “属性源” （property source） 对象中，@Configuration 类可以使用 @PropertySources 注解为 Enviroment 对象提供属性源。
@Configuration
@PropertySource("classpath:/com/acme/app.properties")
public class AppConfig {
@Inject Environment env;
@Bean
public MyBean myBean() {
return new MyBean(env.getProperty("bean.name"));
}
}
See Environment and @PropertySource Javadoc for further details.
参看 Enviroment 和 @PropertySource Java 文档获取更多信息。
Using the @Value annotation
使用 @Value 注解
Externalized values may be ‘wired into‘ @Configuration classes using the @Value annotation:
外化值可以使用 @Value 注解绑定进 @Configuration 类。
@Configuration
@PropertySource("classpath:/com/acme/app.properties")
public class AppConfig {
@Value("${bean.name}") String beanName;
@Bean
public MyBean myBean() {
return new MyBean(beanName);
}
}
This approach is most useful when using Spring‘s PropertySourcesPlaceholderConfigurer, usually enabled via XML with <context:property-placeholder/>. See the section below on composing @Configuration classes with Spring XML using @ImportResource, see @Value Javadoc, and see @Bean Javadoc for details on working with BeanFactoryPostProcessor types such as PropertySourcesPlaceholderConfigurer.
当使用 Spring 的 PropertySourcesPlaceholderConfigurer 时此方式非常有用，PropertySourcesPlaceholderConfigurer 通常在 Spring XML 中通过 <context:property-placeholder/> 来启用。参看下面的使用 @ImportResource（用 Spring XML）组合 @Configuration 类的章节，参看 @Value JavaDoc 和 @Bean JavaDoc 中关于使用 BeanFactoryPostProcessor 类型比如 PropertySourcesPlaceholderConfigurer 的详细信息。
Composing @Configuration classes
组合 @Configuration 类
With the @Import annotation
与 @Import 注解一块使用
@Configuration classes may be composed using the @Import annotation, not unlike the way that <import> works in Spring XML. Because @Configuration objects are managed as Spring beans within the container, imported configurations may be injected using @Autowired or @Inject:
使用 @Import 组合 @Configuration 类，与在 Spring XML 中使用 <import> 的方式没有不同。因为 @Configuration 对象在容器中作为 Spring beans 管理，导入的配置可以使用 @Autowired 或 @Inject 被注入。
@Configuration
public class DatabaseConfig {
@Bean
public DataSource dataSource() {
// instantiate, configure and return DataSource
// 实例化，配置并返回 DataSource
}
}
@Configuration
@Import(DatabaseConfig.class)
public class AppConfig {
@Inject DatabaseConfig dataConfig;
@Bean
public MyBean myBean() {
// reference the dataSource() bean method
// 引用 dataSource() bean 方法
return new MyBean(dataConfig.dataSource());
}
}
Now both AppConfig and the imported DatabaseConfig can be bootstrapped by registering only AppConfig against the Spring context:
现在在 Spring 上下文中只注册 AppConfig，AppConfig 和导入的 DatabaseConfig 就都可以被启用：
new AnnotationConfigApplicationContext(AppConfig.class);
With the @Profile annotation
与 @Profile 注解一块使用
@Configuration classes may be marked with the @Profile annotation to indicate they should be processed only if a given profile or profiles are active:
@Configuration 可以被 @Profile 注解标注，表示当给定的 profile 或 profiles 激活时它们（被 @Profile 注解标注的 @Configuration 类）将被处理：
@Profile("embedded")
@Configuration
public class EmbeddedDatabaseConfig {
@Bean
public DataSource dataSource() {
// instantiate, configure and return embedded DataSource
}
}
@Profile("production")
@Configuration
public class ProductionDatabaseConfig {
@Bean
public DataSource dataSource() {
// instantiate, configure and return production DataSource
}
}
See the @Profile and Environment javadocs for further details.
参见 @Profile 和 Enviroment JavaDocs 获取更多详细信息。
With Spring XML using the @ImportResource annotation
使用 @ImportResource 注解导入 Spring XML 文件中的配置
As mentioned above, @Configuration classes may be declared as regular Spring <bean> definitions within Spring XML files. It is also possible to import Spring XML configuration files into @Configuration classes using the @ImportResource annotation. Bean definitions imported from XML can be injected using @Autowired or @Inject:
上面提到过，@Cofiguration 类可以在 Spring XML 文件中声明为普通 Spring <bean> definiaions。也可以使用 @ImportResource 注解将 Spring XML 配置导入到 @Configuration 类中。从XML中导入的 bean definitions 可以使用 @Autowired 或 @Inject 被注入：
@Configuration
@ImportResource("classpath:/com/acme/database-config.xml")
public class AppConfig {
@Inject DataSource dataSource; // from XML 来自XML
@Bean
public MyBean myBean() {
// inject the XML-defined dataSource bean 注入 XML 定义的 dataSource bean
return new MyBean(this.dataSource);
}
}
With nested @Configuration classes
使用嵌套的 @Configuration 类
@Configuration classes may be nested within one another as follows:
@Configuration 类可以像下面这样被嵌入到另外一个 @Configuration 类中：
@Configuration
public class AppConfig {
@Inject DataSource dataSource;
@Bean
public MyBean myBean() {
return new MyBean(dataSource);
}
@Configuration
static class DatabaseConfig {
@Bean
DataSource dataSource() {
return new EmbeddedDatabaseBuilder().build();
}
}
}
When bootstrapping such an arrangement, only AppConfig need be registered against the application context. By virtue of being a nested @Configuration class, DatabaseConfig will be registered automatically. This avoids the need to use an @Import annotation when the relationship between AppConfig DatabaseConfig is already implicitly clear.
当按此约定启动时，只需要将 AppConfig 注册到应用上下文。通过成为一个嵌套的 @Configuration 类，DatabaseConfig 将会被自动注册。 当 AppConfig 和 DatabaseConfig 的关系很清晰时，这样就避免了使用 @Import 注解。
Note also that nested @Configuration classes can be used to good effect with the @Profile annotation to provide two options of the same bean to the enclosing @Configuration class.
也要注意对于外围 @Configuration 类，带有 @Profile 注解 的嵌套 @Configuration 类用来为同一个bean 提供两个选项。（不通顺）
Configuring lazy initialization
延迟初始化配置
By default, @Bean methods will be eagerly instantiated at container bootstrap time. To avoid this, @Configuration may be used in conjunction with the @Lazy annotation to indicate that all @Bean methods declared within the class are by default lazily initialized. Note that @Lazy may be used on individual @Bean methods as well.
默认地，@Bean 方法将在容器启动时被早期实例化。为了避免这种情况，@Configuration 可以使用 @Lazy 注解表示在此类中声明的所有 @Bean 方法将被延迟初始化。注意 @Bean 也可以用在单独的 @Bean 方法上。
Testing support for @Configuration classes
@Configuration 类的测试支持
The Spring TestContext framework available in the spring-test module provides the @ContextConfiguration annotation, which as of Spring 3.1 can accept an array of @Configuration Class objects:
在 spring-test 模块中提供 @ContextConfiguration 注解使用Spring TestContext 框架，在 Spring 3.1 中它接受一个 @Configuration 类对象数组：
@RunWith(SpringJUnit4ClassRunner.class)
@ContextConfiguration(classes={AppConfig.class, DatabaseConfig.class})
public class MyTests {
@Autowired MyBean myBean;
@Autowired DataSource dataSource;
@Test
public void test() {
// assertions against myBean ...
}
}
See TestContext framework reference documentation for details.
查阅 TestContext 框架参考文档获取详细信息。
Enabling built-in Spring features using @Enable annotations
使用 @Enable 注解启用内置 Spring 特性：
Spring features such as asynchronous method execution, scheduled task execution, annotation driven transaction management, and even Spring MVC can be enabled and configured from @Configuration classes using their respective "@Enable" annotations. See @EnableAsync, @EnableScheduling, @EnableTransactionManagement, @EnableAspectJAutoProxy, and @EnableWebMvc for details.
Spring 特性比如异步方法执行，计划任务执行，注解驱动事务管理甚至 Spring MVC，可以使用他们各自的 @Enable 注解从 @Configuration 类启用和配置。参看 @EnableAync，@EnableScheduling, @EnableTransactionManagement, @EnableAspectJAutoProxy, and @EnableWebMvc 获取详细信息。
Constraints when authoring @Configuration classes
@Configuration classes must be non-final
@Configuration classes must be non-local (may not be declared within a method)
@Configuration classes must have a default/no-arg constructor and may not use @Autowired constructor parameters. Any nested configuration classes must be static.
使用 @Configuration 类的约束限制：
@Configuration classes 必须是非 final的。
@Configuration classes 必须是非局部的（不能再方法内部声明）
@Configuration classes 必须有一个默认无参构造函数并且不能使用 @Autowired 构造器函数。任何嵌套配置类必须是静态的。
标签：
原文地址：http://www.cnblogs.com/whilliy/p/5744291.html
