ADIv5.2

标签：

ADI：ARM Debug Interface，出到现在共有五代：

1)version1 and version 2：只针对ARM7TDMI和ARM9的processor；

2)version 3：只针对ARM10的processor family；

3)ADIv4：使用与所有的ARMv6 architecture；

4)ADIv5.2：针对ARMv7-A和ARMv8-A的processor；分为了Access Port(AP) architecture和Debug Port(DP) architecture

                  DP包括三类：1)JTAG-DP; 满足IEEE 1149.1的接口;

                                    2)SW-DP; 基于packet-based protocol(host-target req, target-host ack, data transfer) 

                                    3)SWJ-DP; can switch between SWD and JTAG

                  AP包括两类：1)MEM-AP(扩展到AXI/ACE); a memory-mapped resource such as a debug peripheral  

                                    2)JTAG-AP; a legacy jtag device

DP来连接外部的host，AP来访问内部的debug component registers

由

ADIv5 DAP

CoreSight components

CoreSIght debug architecture

能提供的功能包括：

1)Embedded core debug functionality,由arm core和ETM这样的module来保证

        1)modify the contents of the internal registers and the memory system;

        2)read the contents of the internal registers and the memory system;

        3)program debug events,在某个event被触发之后，processor可以由外部可控;

        4)Force the processor to enter and exit debug state;

        5)Trace program flow around programmable events;

2)System debug functionality,系统性的debug

        1)Components within an embeded SoC

              program trace

              cross-triggering mechanisms

        2)The interconnection fabric of the system

              trace access on the interconnection fabric

ADIv5.2

标签：

原文地址：http://www.cnblogs.com/-9-8/p/5859731.html