码迷,mamicode.com
首页 > 其他好文 > 详细

CCIE学习笔记之EEM

时间:2014-08-13 15:18:47      阅读:589      评论:0      收藏:0      [点我收藏+]

标签:eem ccie学习笔记

CCIE学习笔记之EEM

当内存使用到一定程度生成日志并发邮件:

注册applet并进入applet配置模式:

Router(config)# event manager appletmemory-fail

定义触发事件:

event snmp oid oid-value get-type{exact|next} entry-op operator entry-val entry-value[exit-comb| and}] [exit-opoperator] [exit-val exit-value] [exit-time exit-time-value] poll-intervalpoll-int-value

例:Router(config-applet)#eventsnmp oid  1.3.6.1.4.1.9.9.48.1.1.1.6.1get-type exact  entry-op lt entry-val5120000 poll-interval  90 

//an EEM event is triggered when free memoryfalls below the value of 5120000

动作显示日志:

action label syslog [prioritypriority-level] msg msg-text facility string

例:Router(config-applet)#action 1.0 syslog  priority critical msg"Memory exhausted; current available memory is $_snmp_oid_val bytes"

动作发送邮件:

action label mail server server-address toto-address from from-address [cc cc-address] subject

subject body body-text

例:Router(config-applet)#action 2.0 mail  server 192.168.1.10 to  engineering@example.com from  devtest@example.com subject "Memory  failure" body "Memory exhausted;current

available memory is $_snmp_oid_valbytes"

 

设置环境变量

event manager environment  _email_to engineering@example.com

手动执行

Router(config)#event  manager  applet  manual-policy

Router(config-applet)# event none

Router(config-applet)# action 1.0  syslog  msg"Manual-policy triggered"

Router# event manager run manual-policy

查看注册:

show event manager policy registered

取消注册

no event manager policy policy-filename

例:

Router(config)# no event manager policyIPSLAping1

//Removes the EEM policy from theconfiguration,causing the policy to be unregistered.

暂停执行所有EEM策略:

Router(config)# event manager schedulersuspend

Tracking a Stub Object

Router(config)# track 2 stub-object

Router(config-track)# default-state up

Router(config)# event manager applet  track-two

Router(config-applet)# event track 2  state down

Router(config-applet)# action 1.0 track  set 2 state up

Router(config-applet)# action 2.0 trackread 2

显示EEM历史数据:

Router(config)# event manager history sizeevents 30

Router# show event manager history events

No. Time of Event             EventType          Name

1   Fri Aug13  21:42:57 2004  snmp                applet: SAAping1

2   Fri Aug13  22:20:29 2004  snmp                applet: SAAping1

3   Wed Aug18  21:54:48 2004  snmp                applet: SAAping1

4   Wed Aug18  22:06:38 2004  snmp                applet: SAAping1

5   Wed Aug18  22:30:58 2004  snmp                applet: SAAping1

6   Wed Aug18  22:34:58 2004  snmp                applet: SAAping1

7   Wed Aug18  22:51:18 2004  snmp                applet: SAAping1

8   Wed Aug18  22:51:18 2004  application         applet: CustApp1

Router# show event manager history trapspolicy

No. Time                      TrapType           Name

1   Wed Aug18  22:30:58 2004  policy              EEM Policy Director

2   Wed Aug18  22:34:58 2004  policy              EEM Policy Director

3   Wed Aug18  22:51:18 2004  policy              EEM Policy Director

Router# show event manager policy registeredtime-ordered

No. Type    Event Type          Time                    Registered Name

1   applet  snmp                Thu May30 05:57:16 2004memory-fail

 oid{1.3.6.1.4.1.9.9.48.1.1.1.6.1} get-type exact entry-op lt entry-val

{5120000} poll-interval 90

action 1.0 syslog priority critical msg"Memory exhausted; current available memory

is $_snmp_oid_val bytes"

 action 2.0 force-switchover

2   applet  syslog              Wed Jul16 00:05:17 2004 intf-down

 pattern {.*UPDOWN.*Ethernet1/0.*}

 action1.0 cns-event msg "Interface state change: $_syslog_msg"   

Configuring Event SNMP Notification

Router(config-applet)# eventsnmp-notification dest-ip-address 192.168.1.1 oid 1 op eq oid-val 10

多事件检测:

event manager applet delay_50

 event tag 1.0 cli pattern "show bgpall" sync yes occurs 32 period 60 maxrun 60

 event tag 2.0 syslog pattern "COUNT"

 trigger occurs 1 delay 50

 correlate event 1.0 or event 2.0

 attribute tag 1.0 occurs 1

 attribute tag 2.0 occurs 1

 action 1.0 cli command "show memory"

 action2.0 cli command "enable"

 action 3.0 cli command "configterminal"

 action 4.0 cli command " ip route192.0.2.0 255.255.255.224 192.0.2.12"

 action 91.0 cli command "exit"

 action 99.0 cli command "show ip route |incl 192.0.2.5"

Configuring EEM Class-Based Scheduling

Router(config)# event manager schedulerapplet  thread class default number 2

//In this example, two EEM executionthreads are created to run applets assigned to the default class

Holding a Scheduled EEM Policy Event or Event Queue

Router# event manager scheduler hold policy2

// Router# event manager scheduler holdpolicy 2

Resuming Execution of EEM Policy Events or Event Queues

Router# event manager scheduler release  policy 2

// The example shows how to resume theexecution of the policy with job ID of 2

Clearing Pending EEM Policy Events or Event Queues

Router# event manager scheduler clearpolicy 2

// In this example, the EEM policy with ajob ID of 2 is cleared from the pending queue

Modifying the Scheduling Parameters of EEM Policy Eventsor Event Queues

event manager scheduler modify all class A

// In this example, all currently pendingEEM policies are assigned to class A

Reading Input from the Active Console

Router(config)# event manager applet action

Router(config-applet)# event none

Router(config-applet)# action label2 getsinput

// Gets input from the local console in asynchronous applet and stores the value in the given variable when an EEMapplet is triggered.

Router(config-applet)# action label3 syslogmsg “Input entered was \”$input\“”

In this example, the action to be taken isto write the value of the variable specified in Step 5, to syslog

效果:

bubuko.com,布布扣

Writing Input to the Active Console

Router(config-applet)# event manager appletputs

Router(config-applet)# event none

Router(config-applet)# action 1 regexp"(.*) (.*) (.*)" "one two three" _match _sub1

// Specifies the action to match theregular expression pattern on an input string when an EEM applet is triggered

Router(config-applet)# action 2 puts"match is $_match"

Router(config-applet)# action 3 puts"submatch 1 is $_sub1"

Router# event manager run puts

match is one two three

submatch 1 is one

 

bubuko.com,布布扣

Configuring SNMP Library Extensions

Router(config)# event manager applet snmp

 

Router(config-applet)# event snmp oid 1.3.6.1.4.1.9.9.48.1.1.1.6.1get-type exac entry-op lt entry-val 5120000 poll-interval 90

// event snmp oid oid-value get-type {exact| next} entry-op operator

entry-val entry-value[exit-comb | and}][exit-op operator] [exit-val

exit-value] [exit-time exit-time-value]poll-interval poll-int-value

//In this example, an EEM event is

triggered when free memory falls below

the value of 5120000

 

Router(config-applet)# action 1.3 info typesnmp oid 1.3.6.1.4.1.9.9.48.1.1.1.6.1 get-type exact community public ipaddr172.17.16.69

// action label info type snmp oidoid-value get-type {exact| next}

[community community-string] [ipaddrip-address]

// In this example, the type of getoperation

is specified as exact and community

string is specified as public.

 

Router(config-applet)# action 1.4 info typesnmp oid 1.3.6.1.4.1.9.9.48.1.1.1.6.1 set-type integer 42220 sysName.0community rw ipaddr 172.17.16.69

// action label info type snmp oidoid-value set-type oid-type oid-type-value community community-string [ipaddrip-address]

// In this example, the sysName.0 variable

is specified for the set operation and

community string is specified as rw.

 

Router(config-applet)# action 1.3 info typesnmp getid community public ipaddr 172.17.16.69

// action label info type snmp getidoid-value [community community-string] [ipaddr ip-address]

// (Optional) Specifies if the individual

variables should be retrieved by the getid

operation

Configuring EEM Applet for SNMP OID Notifications

Router(config)# event manager applet snmp

 

Router(config-applet)# event snmp oid 1.3.6.1.4.1.9.9.48.1.1.1.6.1get-type exact entry-op lt entry-val 5120000 poll-interval 90

 

Router(config-applet)# action 1.3 info typesnmp var sysDescr.0 oid 1.3.6.1.4.1.9.9.48.1.1.1.6.1 integer 4220

// action label info type snmp varvariable-name oid oid-value oid-type oid-type-value

// In this example, the sysDescr.0 variableis used

 

outer(config-applet)# action 1.4 info type snmptrap enterprise-oid 1.3.6.1.4.1.1 generic-trapnum 4 specific-trapnum 7 trap-oid1.3.6.1.4.1.1.226.0.2.1 trap-var sysUpTime.0

// action label info type snmp trapenterprise-oid enterprise-oid-value

generic-trapnum generic-trap-numberspecific-trapnum specific-trap-number trap-oid trap-oid-value trap-vartrap-variable

// In this example, theauthenticationFailure trap is generated

// The specific trap number refers to the

enterprise-specific trap, which isgenerated

when an enterprise event occurs. If the

generic trap number is not set to 6, the

specific trap number you specify will be

used to generate traps

 

Router(config-applet)# action 1.4 info typesnmp inform trap-oid 1.3.6.1.4.1.1.226.0.2.1 trap-var sysUpTime.0 communitypublic ipaddr 172.69.16.2

// action label info type snmp informtrap-oid trap-oid-value trap-var trap-variable community community-stringipaddr ip-address

// In this example, the inform request is generatedfor the sysUpTime.0 variable

Configuring Variable Logic for EEM Applets

Router(config)# event manager appletcondition

Router(config-applet)#even none

Router(config-applet)#action 1.0 set i 2

// In this example, the value of thevariable i is set to 2

Router(config-applet)# action 2 while $i lt10

// In this example, a loop is set to checkif the value of the variable i is less than 10

Router(config-applet)# action 3 syslog msg  "i is $i"

// In this example, the message ‘i is $_i’is written to the syslog

Router(config-applet)# action 3 end

 

Specifying if else Conditional Blocks

Router(config)# event manager appletifcondition

Router(config-applet)# action 1.0 set x 5

Router(config-applet)# action 2.0 if $x lt10

Router(config-applet)# action 3.0 puts “$xis  less than 10”

Router(config-applet)# action 4.0 else

Router(config-applet)# action 5.0

bubuko.com,布布扣

Specifying foreach Iterating Statements

Router(config)# event manager appletiteration

Router(config-applet)# action 2.0 foreach  iterator "red blue green orange"

Router(config-applet)# action 3.0 puts  "Iterator is $iterator"

Router(config-applet)# action 4.0 end

bubuko.com,布布扣

bubuko.com,布布扣

Using Regular Expressions

Router(config)# event manager applet regexp

Router(config-applet)# action 2.0 regexp"(.*) (.*) (.*)" "red blue green" _match _sub1

//In this example, an input string of ‘redblue green’ is

specified. When the expression patternmatches the input

string, the entire result red blue green isstored in the

variable _match and the submatch redisstored in the

variable _sub1

Incrementing the Values of Variables

Router(config)# event manager appletincrement

Router(config-applet)#action 1.0 setvarname 20

Router(config-applet)#action 2.0 increment  varname 12

// In this example, the value of thevariable is incremented by 12

bubuko.com,布布扣

bubuko.com,布布扣

Configuring Event SNMP Object

Router(config)# event manager appletmanual-policy

Router(config-applet)# event snmp-objectoid  1.9.9.9.9 type gauge sync yes

action 1 syslog msg "oid =$_snmp_oid"

action 2 syslog msg "request =$_snmp_request"

action 3 syslog msg "request_type =“$_snmp_request_type"

Disabling AAA Authorization

Router(config-applet)# event manager appletone class  A authorization bypass

//event manager applet applet-name[authorization bypass][class class-options] [trap]

// allow EEM policies to bypass AAAauthorization when triggered

Description of EEM

event manager applet applet-name

description line

Application-Specific Event Detector

event manager applet EventPublish_A

 event timer watchdog time 20.0                      //20秒执行一次

 action 1.0 syslog msg "AppletEventPublish_A"

 action 2.0 publish-event sub-system 798 type 1arg1 twenty   //公布事件(用于触发)

 exit

event manager applet EventPublish_B

 event application sub-system 798 type 1                //触发事件

 action 1.0 syslog msg "AppletEventPublish_B arg1 $_application_data1"

bubuko.com,布布扣

bubuko.com,布布扣

//事件a的执行出发事件b的执行,事件a如果不执行,事件b也不执行:

bubuko.com,布布扣

CLI Event Detector

event manager applet cli-match

 event cli pattern "write mem.*" syncyes   // yes the event detector isnotified when this policy completes running

 action 1.0 syslog msg "$_cli_msg CommandExecuted"

 set 2.0 _exit_status 1  // The exit status of the policy determineswhether the CLI command will be executed the policy exit status is set to oneand the CLI command runs

bubuko.com,布布扣

bubuko.com,布布扣

另一个例子:

bubuko.com,布布扣

bubuko.com,布布扣

Counter Event Detector and Timer Event Detector

event manager applet EventCounter_A

 eventtimer watchdog time 60.0

 action 1.0 syslog msg “EventCounter_A”

 action 2.0 counter name critical_errors op incvalue 1

 exit

event manager applet EventCounter_B

 event counter name critical_errors entry-op gtentry-val 3 exit-op lt exit-val 3

 action1.0 syslog msg “EventCounter_B”

 action 2.0 counter name critical_errors op setvalue 0

aa运行4bb运行1次,不断重复:

bubuko.com,布布扣

 

 

bubuko.com,布布扣

Interface Counter Event Detector(监测接口)

event manager applet EventInterface

 event interface name FastEthernet0/0 parameterreceive_throttle entry-op ge entry-val 5

 entry-val-is-increment true poll-interval 90

 action 1.0 syslog msg "AppletEventInterface"

bubuko.com,布布扣bubuko.com,布布扣

bubuko.com,布布扣

Resource Event Detector(监测资源)

event manager applet policy-one

 event resource policy cpu-high

 action 1.0 syslog msg “CPU high at$_resource_current_value percent”

SNMP Event Detector

The following example shows how to specifyan EEM applet to run when the CPU usage is greater than 75 percent. When theEEM applet runs, the CLI commands enable and show cpu processes are run, and ane-mail containing the result of the show cpu processes command is sent to anengineer.

event manager appletsnmpcpuge75

 event snmpoid 1.3.6.1.4.1.9.9.109.1.1.1.1.3.1 get-type exact entry-op ge entry-val 1 poll-interval10

 action 1.0cli command "enable"

 action 2.0cli command "show process cpu"

 action 3.0 mail server"192.168.1.146" to "engineer@cisco.com" from"devtest@cisco.com"

subject "B25 PBX Alert" body"$_cli_result"

 

event manager applet memory-demo

 event snmp oid 1.3.6.1.4.1.9.9.48.1.1.1.6.1get-type exact entry-op lt entry-val 5120000

poll-interval 90

 action 1.0 syslog priority critical msg"Memory exhausted; current available memory is

$_snmp_oid_val bytes"

 action 2.0 force-switchover

// The applet will run when the

available memory on the primary RP fallsbelow the specified threshold of 5,120,000 bytes. The applet

actions are to write a message to syslogthat indicates the number of bytes of memory available and to

switch to the secondary RP

 

Syslog Event Detector

event manager applet interface-down

 event syslog pattern “.*UPDOWN.*Ethernet1/0.*”occurs 4

 action 1.0 syslog msg "Ethernet interface1/0 changed state 4 times"

事件的嵌套:

vent manager applet manual-policy

 event none

 action 1.0 syslog msg "Manual-policytriggered"

 exit

!

event manager applet manual-policy-two

 event none

 action 1.0 policy manual-policy

 end

!

event manager run manual-policy-two

Tracking a Stub Object Using EEM

track 10 stub-object

 default-state down

!

event manager applet track-ten

 event track 10 state any

 action 1.0 track set 10 state up

 action 2.0 track read 10

Embedded Event Manager Watchdog System Monitor (Cisco IOSwsmon) Event  Detector

cpu:

event manager applet c

 event ioswdsysmon sub1 cpu-proc taskname"Exec" op lt val 20 period 10

 action 1 syslog msg "cpu c"

memory:

event manager applet c

 event ioswdsysmon sub1 mem-proc taskname"Net Input" op lt val 90 is-percent true period 10

 action 1 syslog msg "mem c"

Configuration SNMP Library Extensions Examples

Thefollowing example shows how to send a get request to the local host

Router(config)# event manager applet snmp

Router(config-applet)# event snmp oid

 1.3.6.1.2.1.1.1.0 get-type exact entry-op

 ltentry-val

 5120000 poll-interval

90

Router(config-applet)# action 1.3 info typesnmp oid

 1.3.6.1.2.1.1.1.0 get-type exact

community

 public

Router(config-applet)# action 1.3 info typesnmp oid

 1.3.6.1.2.1.1.4.0get-type next community

public

 

Thefollowing example shows how to send a get request to a remote host

Router(config)# event manager applet snmp

Router(config-applet)# event snmp oid

 1.3.6.1.2.1.1.1.0 get-type exact entry-op

 ltentry-val

 5120000 poll-interval

 90

Router(config-applet)# action 1.3 info typesnmp oid

1.3.6.1.2.1.1.4.0 get-type next community

 public ipaddr

 172.17.16.69

Router(config-applet)# action 1.3 info typesnmp getid

 1.3.6.1.2.1.1.1.0 community

 public ipaddr

 172.17.16.69

 

Managing EEM Policies

Router(config)# event manager directory  user library disk0:/usr/lib/tcl

//Specifies a directory to use for storinguser library files or user-defined EEM policies

action label2 multiply 23 25

乘法,结果存在$_result

除法的余数存在$_remainder

除法:

bubuko.com,布布扣

bubuko.com,布布扣


本文出自 “flyclc” 博客,请务必保留此出处http://flyclc.blog.51cto.com/1385758/1539304

CCIE学习笔记之EEM,布布扣,bubuko.com

CCIE学习笔记之EEM

标签:eem ccie学习笔记

原文地址:http://flyclc.blog.51cto.com/1385758/1539304

(0)
(0)
   
举报
评论 一句话评论(0
登录后才能评论!
© 2014 mamicode.com 版权所有  联系我们:gaon5@hotmail.com
迷上了代码!