码迷,mamicode.com
首页 > 其他好文 > 详细

strtok()函数

时间:2016-10-15 11:16:59      阅读:147      评论:0      收藏:0      [点我收藏+]

标签:

strtok()这个函数大家都应该碰到过,但好像总有些问题, 这里着重讲下它

首先看下MSDN上的解释:

char *strtok( char *strToken, const char *strDelimit );

Parameters

strToken

String containing token or tokens.

strDelimit

Set of delimiter characters.

Return Value

Returns a pointer to the next token found in strToken. They return NULL when no more tokens are found. Each call modifies strToken by substituting a NULL character for each delimiter that is encountered.

Remarks

The strtok function finds the next token in strToken. The set of characters in strDelimitspecifies possible delimiters of the token to be found in strToken on the current call.

Security Note    These functions incur a potential threat brought about by a buffer overrun problem. Buffer overrun problems are a frequent method of system attack, resulting in an unwarranted elevation of privilege. For more information, see Avoiding Buffer Overruns.

On the first call to strtok, the function skips leading delimiters and returns a pointer to the first token in strToken, terminating the token with a null character. More tokens can be broken out of the remainder of strToken by a series of calls to strtok. Each call tostrtok modifies strToken by inserting a null character after the token returned by that call. To read the next token from strToken, call strtok with a NULL value for the strTokenargument. The NULL strToken argument causes strtok to search for the next token in the modified strToken. The strDelimit argument can take any value from one call to the next so that the set of delimiters may vary.

Note   Each function uses a static variable for parsing the string into tokens. If multiple or simultaneous calls are made to the same function, a high potential for data corruption and inaccurate results exists. Therefore, do not attempt to call the same function simultaneously for different strings and be aware of calling one of these functions from within a loop where another routine may be called that uses the same function. However, calling this function simultaneously from multiple threads does not have undesirable effects.

很晕吧? 呵呵。。。

简单的说,就是函数返回第一个分隔符分隔的子串后,将第一参数设置为NULL,函数将返回剩下的子串。

下面我们来看一个例子:

 1 int main() 
 2 
 3 {
 4 
 5       char test1[] = "feng,ke,wei";  
 6 
 7       char *test2 = "feng,ke,wei";  
 8 
 9       char *p;  
10 
11       p = strtok(test1, ",");
12 
13       while(p)  
14 
15           {   
16 
17               printf("%s\n", p);   
18 
19               p = strtok(NULL, ",");     
20 
21           }      
22 
23       return 0;
24 
25  }
26 
27 运行结果:
28 
29 feng
30 
31 ke
32 
33 wei

 

说明:

函数strtok将字符串分解为一系列标记(token),标记就是一系列用分隔符(delimiting chracter,通常是空格或标点符号)分开的字符。注意,此的标记是由delim分割符分割的字符串喔。

例如,在一行文本中,每个单词可以作为标记,空格是分隔符。
需要多次调用strtok才能将字符串分解为标记(假设字符串中包含多个标记)。第一次调用strtok包含两个参数,即要标记化的字符串和包含用来分隔标记的字符的字符串(即分隔符)下列语句: tokenPtr = Strtok(string, " ")
tokenPtr赋给string中第一个标记的指针。strtok的第二个参数””表示string中的标记用空格分开。
函数strtok搜索string中不是分隔符(空格)的第一个字符,这是第一个标记的开头。然后函数寻找字符串中的下一个分隔符,将其换成null( w)字符,这是当前标记的终点。注意标记的开始于结束。

函数strtok保存string中标记后面的下一个字符的指针,并返回当前标记的指针。


后面再调用strtok时,第一个参数为NULL,继续将string标记化。NULL参数表示调用strtok继续从string中上次调用 strtok时保存的位置开始标记化。

如果调用strtok时已经没有标记,则strtok返回NULL注意strtok修改输入字符串,因此,如果调用strtok之后还要在程序中使用这个字符串,则应复制这个字 符串。

但如果用p = strtok(test2, ",")则会出现内存错误,这是为什么呢?是不是跟它里面那个静态变量有关呢? 我们来看看它的原码:

  1 /***
  2 
  3 *strtok.c - tokenize a string with given delimiters
  4 
  5 *
  6 
  7 *       Copyright (c) Microsoft Corporation. All rights reserved.
  8 
  9 *
 10 
 11 *Purpose:
 12 
 13 *       defines strtok() - breaks string into series of token
 14 
 15 *       via repeated calls.
 16 
 17 *
 18 
 19 *******************************************************************************/
 20 
 21 #include
 22 
 23 #include
 24 
 25 #ifdef _MT
 26 
 27 #include
 28 
 29 #endif  /* _MT */
 30 
 31 /***
 32 
 33 *char *strtok(string, control) - tokenize string with delimiter in control
 34 
 35 *
 36 
 37 *Purpose:
 38 
 39 *       strtok considers the string to consist of a sequence of zero or more
 40 
 41 *       text tokens separated by spans of one or more control chars. the first
 42 
 43 *       call, with string specified, returns a pointer to the first char of the
 44 
 45 *       first token, and will write a null char into string immediately
 46 
 47 *       following the returned token. subsequent calls with zero for the first
 48 
 49 *       argument (string) will work thru the string until no tokens remain. the
 50 
 51 *       control string may be different from call to call. when no tokens remain
 52 
 53 *       in string a NULL pointer is returned. remember the control chars with a
 54 
 55 *       bit map, one bit per ascii char. the null char is always a control char.
 56 
 57 *       //这里已经说得很详细了!!比MSDN都好!
 58 
 59 *Entry:
 60 
 61 *       char *string - string to tokenize, or NULL to get next token
 62 
 63 *       char *control - string of characters to use as delimiters
 64 
 65 *
 66 
 67 *Exit:
 68 
 69 *       returns pointer to first token in string, or if string
 70 
 71 *       was NULL, to next token
 72 
 73 *       returns NULL when no more tokens remain.
 74 
 75 *
 76 
 77 *Uses:
 78 
 79 *
 80 
 81 *Exceptions:
 82 
 83 *
 84 
 85 *******************************************************************************/
 86 
 87 char * __cdecl strtok (
 88 
 89         char * string,
 90 
 91         const char * control
 92 
 93         )
 94 
 95 {
 96 
 97         unsigned char *str;
 98 
 99         const unsigned char *ctrl = control;
100 
101         unsigned char map[32];
102 
103         int count;
104 
105 #ifdef _MT
106 
107         _ptiddata ptd = _getptd();
108 
109 #else  /* _MT */
110 
111         static char *nextoken;                        //保存剩余子串的静态变量   
112 
113 #endif  /* _MT */
114 
115         /* Clear control map */
116 
117         for (count = 0; count < 32; count++)
118 
119                 map[count] = 0;
120 
121         /* Set bits in delimiter table */
122 
123         do {
124 
125                 map[*ctrl >> 3] |= (1 << (*ctrl & 7));
126 
127         } while (*ctrl++);
128 
129         /* Initialize str. If string is NULL, set str to the saved
130 
131          * pointer (i.e., continue breaking tokens out of the string
132 
133          * from the last strtok call) */
134 
135         if (string)
136 
137                 str = string;                             //第一次调用函数所用到的原串       
138 
139 else
140 
141 #ifdef _MT
142 
143                 str = ptd->_token;
144 
145 #else  /* _MT */
146 
147                 str = nextoken;                      //将函数第一参数设置为NULL时调用的余串
148 
149 #endif  /* _MT */
150 
151   /* Find beginning of token (skip over leading delimiters). Note that
152          * there is no token iff this loop sets str to point to the terminal
153          * null (*str == ‘\0‘) */
154         while ( (map[*str >> 3] & (1 << (*str & 7))) && *str )
155                 str++;
156         string = str;                                  //此时的string返回余串的执行结果 
157         /* Find the end of the token. If it is not the end of the string,
158          * put a null there. */
159 //这里就是处理的核心了, 找到分隔符,并将其设置为‘\0‘,当然‘\0‘也将保存在返回的串中
160         for ( ; *str ; str++ )
161                 if ( map[*str >> 3] & (1 << (*str & 7)) ) {
162                         *str++ = \0;              //这里就相当于修改了串的内容 ①
163                         break;
164                 }
165         /* Update nextoken (or the corresponding field in the per-thread data
166          * structure */
167 #ifdef _MT
168         ptd->_token = str;
169 #else  /* _MT */
170         nextoken = str;                 //将余串保存在静态变量中,以便下次调用
171 #endif  /* _MT */
172         /* Determine if a token has been found. */
173         if ( string == str )
174               return NULL;
175         else
176                 return string;
177 }

原来, 该函数修改了原串. 

所以,当使用char *test2 = "feng,ke,wei"作为第一个参数传入时,在位置①处, 由于test2指向的内容保存在文字常量区,该区的内容是不能修改的,所以会出现内存错误. 而char test1[] = "feng,ke,wei" 中的test1指向的内容是保存在栈区的,所以可以修改.

看到这里  大家应该会对文字常量区有个更加理性的认识吧.....

strtok()函数

标签:

原文地址:http://www.cnblogs.com/fnlingnzb-learner/p/5962939.html

(0)
(0)
   
举报
评论 一句话评论(0
登录后才能评论!
© 2014 mamicode.com 版权所有  联系我们:gaon5@hotmail.com
迷上了代码!