在存储过程创建临时表，插入字段，更新字段

  1 CREATE PROCEDURE [dbo].[Proc_PX_Situation]
  2 @BMDateFrom nvarchar(50),  --报名时间 从
  3 @BMDateEnd nvarchar(50),  --报名时间 到
  4 @BenlonFenJu nvarchar(50) --所属分局
  5 AS
  6 begin
  7 --declare @SqlStr nvarchar(2000);
  8      create table #temp_table(
  9      Row_ID int,
 10                               RowGuid varchar(50),       --计划Guid
 11                               --PX_Plan
 12                               PlanName nvarchar(100),     --培训名称
 13                               UnitCount int,              --计划参加企业总数
 14                               UserCount int,              --计划参加人员总数
 15                               --PX_BaoM
 16                               BMUnitCount int,            --实际报名企业总数 某一个计划下面报名的 DanWeiName的数量,不重复
 17                               BMUserCount int,            --实际报名人员总数 某一个计划下面报名的 Count(UserGuid)                    
 18                               PayUnitCount int,              --实际交费企业总数    
 19                               PayUserCount int,              --实际交费人员总数    
 20                               PXUnitCount int,              --实际培训企业总数    
 21                               PXUserCountt int ,            --实际培训人员总数
 22                               BaoMDNum nvarchar(50)      --报名点
 23                              -- BaoMdate datetime           --报名时间
 24                               )                              
 25                               
 26     insert into   #temp_table(
 27     Row_ID,
 28                               RowGuid ,       --计划Guid
 29                               --PX_Plan
 30                               PlanName ,    --培训名称
 31                               UnitCount ,   --计划参加企业总数
 32                               UserCount ,   --计划参加人员总数
 33                               --PX_BaoM
 34                               BMUnitCount , --实际报名企业总数 某一个计划下面报名的 DanWeiName的数量,不重复
 35                               BMUserCount , --实际报名人员总数 某一个计划下面报名的 Count(UserGuid)                    
 36                               PayUnitCount , --实际交费企业总数    
 37                               PayUserCount , --实际交费人员总数    
 38                               PXUnitCount , --实际培训企业总数    
 39                               PXUserCountt , --实际培训人员总数
 40                               BaoMDNum      --报名点
 41                              -- BaoMdate       --报名时间                              
 42                               )        
 43     (select Row_ID, RowGuid,PlanName,‘‘,‘‘,‘‘,‘‘,‘‘,‘‘,‘‘,‘‘,‘‘ from PX_Plan) 
 44 
 45     --统计start
 46 
 47      --计划参加企业总数
 48      if @BenlonFenJu=‘‘     
 49      update a set a.UnitCount=b.UnitCount from #temp_table a,
 50      (     
 51      select RowGuid,UnitCount from px_plan
 52      )b where a.RowGuid=b.RowGuid
 53      else
 54      update a set a.UnitCount=b.UnitCount from #temp_table a,
 55      (     
 56      select PlanGuid,UnitCount,BaoMDCode from PX_PlanBaoMD where BaoMDCode=@BenlonFenJu
 57      )b where a.RowGuid=b.PlanGuid
 58 
 59      --计划参加人员总数
 60      if @BenlonFenJu=‘‘    
 61      update a set a.UserCount=b.UserCount from #temp_table a,
 62      (
 63      select RowGuid,UserCount from px_plan
 64      )b where a.RowGuid=b.RowGuid
 65       else
 66      update a set a.UserCount=b.UserCount from #temp_table a,
 67      (     
 68      select PlanGuid,UserCount,BaoMDCode from PX_PlanBaoMD where BaoMDCode=@BenlonFenJu
 69      )b where a.RowGuid=b.PlanGuid
 70 
 71     --实际报名企业总数
 72     update  a set a.BMUnitCount=b.total  from  #temp_table  a, 
 73     (
 74     select  planguid, count(distinct DanWeiGuid) total  from (
 75         select BMAddDate,planguid,DanWeiGuid  from View_PX_Plan_BaoM 
 76             where BMAddDate >(case @BMDateFrom when ‘‘ then ‘1900-01-01‘ else @BMDateFrom end) 
 77                 and BMAddDate<(case @BMDateEnd when ‘‘ then GETDATE() else @BMDateEnd end)  
 78                 and BaoMDNum in    (select BaoMDCode from PX_PlanBaoMD where BaoMDCode like ‘%‘+@BenlonFenJu+‘%‘)            
 79         )p group by p.planguid 
 80     )b  where a.RowGuid=b.PlanGuid
 81 
 82     --实际报名人员总数
 83     update a set a.BMUserCount=b.total from #temp_table a,
 84     (
 85     select planguid,count(UserGuid) total from (
 86         select BMAddDate,planguid,UserGuid from View_PX_Plan_BaoM
 87             where BMAddDate >(case @BMDateFrom when ‘‘ then ‘1900-01-01‘ else @BMDateFrom end) 
 88                 and BMAddDate<(case @BMDateEnd when ‘‘ then GETDATE() else @BMDateEnd end)  
 89                 and BaoMDNum in    (select BaoMDCode from PX_PlanBaoMD where BaoMDCode like ‘%‘+@BenlonFenJu+‘%‘)    
 90         )p group by p.planguid
 91     )b where a.RowGuid=b.PlanGuid
 92 
 93     --实际交费企业总数
 94     update a set a.PayUnitCount=b.total from #temp_table a,
 95     (select planguid,count(distinct DanWeiGuid) total from(
 96         select BMAddDate,planguid,DanWeiGuid  from View_PX_Plan_BaoM 
 97             where IsPay=1
 98                 and BMAddDate >(case @BMDateFrom when ‘‘ then ‘1900-01-01‘ else @BMDateFrom end) 
 99                 and BMAddDate<(case @BMDateEnd when ‘‘ then GETDATE() else @BMDateEnd end)  
100                 and BaoMDNum in    (select BaoMDCode from PX_PlanBaoMD where BaoMDCode like ‘%‘+@BenlonFenJu+‘%‘)
101         )p group by p.planguid 
102     )b where a.RowGuid=b.PlanGuid
103         
104     --实际交费人员总数
105     update a set a.PayUserCount=b.total from #temp_table a,
106     (select planguid,count(UserGuid) total from(
107         select BMAddDate,planguid,UserGuid  from View_PX_Plan_BaoM 
108             where IsPay=1
109                 and BMAddDate >(case @BMDateFrom when ‘‘ then ‘1900-01-01‘ else @BMDateFrom end) 
110                 and BMAddDate<(case @BMDateEnd when ‘‘ then GETDATE() else @BMDateEnd end)  
111                 and BaoMDNum in    (select BaoMDCode from PX_PlanBaoMD where BaoMDCode like ‘%‘+@BenlonFenJu+‘%‘)
112         )p group by p.planguid 
113     )b where a.RowGuid=b.PlanGuid
114 
115     --实际培训企业总数
116     update a set a.PXUnitCount=b.total from #temp_table a,
117     (select planguid,count(distinct DanWeiGuid) total from(
118         select BMAddDate,planguid,DanWeiGuid  from View_PX_Plan_BaoM 
119             where IsPay=1 and IsPeiXun=1
120                 and BMAddDate >(case @BMDateFrom when ‘‘ then ‘1900-01-01‘ else @BMDateFrom end) 
121                 and BMAddDate<(case @BMDateEnd when ‘‘ then GETDATE() else @BMDateEnd end)  
122                 and BaoMDNum in    (select BaoMDCode from PX_PlanBaoMD where BaoMDCode like ‘%‘+@BenlonFenJu+‘%‘)        
123         )p group by p.planguid 
124     )b where a.RowGuid=b.PlanGuid
125 
126     --实际培训人员总数
127     update a set a.PXUserCountt=b.total from #temp_table a,
128     (select planguid,count(UserGuid) total from(
129         select BMAddDate,planguid,UserGuid  from View_PX_Plan_BaoM 
130             where IsPay=1 and IsPeiXun=1
131                 and BMAddDate >(case @BMDateFrom when ‘‘ then ‘1900-01-01‘ else @BMDateFrom end) 
132                 and BMAddDate<(case @BMDateEnd when ‘‘ then GETDATE() else @BMDateEnd end)  
133                 and BaoMDNum in    (select BaoMDCode from PX_PlanBaoMD where BaoMDCode like ‘%‘+@BenlonFenJu+‘%‘)            
134         )p group by p.planguid 
135     )b where a.RowGuid=b.PlanGuid
136 
137     --报名点
138     update a set a.BaoMDNum=b.BaoMDNum from #temp_table a,
139     (select distinct planguid,BaoMDNum from View_PX_Plan_BaoM)b where a.RowGuid=b.PlanGuid
140 
141 
142     --报名时间  --AddDate
143     --update a set a.BaoMdate=b.BMAddDate from #temp_table a,
144     --(select planguid,DanWeiGuid, BMAddDate from View_PX_Plan_BaoM)b where a.RowGuid=b.PlanGuid
145     --统计end
146          
147        select * from #temp_table order by Row_ID DESC
148      
149  end
150 
151 
152 
153 
154 
155 
156 GO