码迷,mamicode.com
首页 > 其他好文 > 详细

路由器基本配置

时间:2016-10-27 13:01:29      阅读:313      评论:0      收藏:0      [点我收藏+]

标签:cte   version   sof   开端口   工作   author   contain   静态路由   ios   

【本实验是为路由器基本配置(2)做准备工作】

 

按照下图,完成网络连通练习。

                       

1. 按照IP地址分配表为每台计算机分配IP地址。

设备

端口

IP地址

子网掩码

网关

PC0

 

192.168.10.10

255.255.255.0

192.168.10.1

PC1

 

192.168.10.20

255.255.255.0

192.168.10.1

PC2

 

192.168.20.10

255.255.255.0

192.168.20.1

PC3

 

192.168.20.20

255.255.255.0

192.168.20.1

ROUTER1

Fa 0/0

192.168.10.1

255.255.255.0

 

ROUTER1

Fa 0/1

192.168.20.1

255.255.255.0

 

 

2. 连接网络。

3. 为每台计算机配置IP地址。

4. 配置路由器。

路由器启动过程

Cisco IOS Software, 1841 Software (C1841-ADVIPSERVICESK9-M), Version 12.4(15)T1, RELEASE SOFTWARE (fc2)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2007 by Cisco Systems, Inc.

Compiled Wed 18-Jul-07 04:52 by pt_team

         --- System Configuration Dialog ---

 Continue with configuration dialog? [yes/no]: System Bootstrap, Version 12.3(8r)T8, RELEASE SOFTWARE (fc1)

Cisco 1841 (revision 5.0) with 114688K/16384K bytes of memory.

 

Self decompressing the image :

########################################################################## [OK]

              Restricted Rights Legend

 Use, duplication, or disclosure by the Government is

subject to restrictions as set forth in subparagraph

(c) of the Commercial Computer Software - Restricted

Rights clause at FAR sec. 52.227-19 and subparagraph

(c) (1) (ii) of the Rights in Technical Data and Computer

Software clause at DFARS sec. 252.227-7013.

            cisco Systems, Inc.

           170 West Tasman Drive

           San Jose, California 95134-1706

 

Cisco IOS Software, 1841 Software (C1841-ADVIPSERVICESK9-M), Version 12.4(15)T1, RELEASE SOFTWARE (fc2)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2007 by Cisco Systems, Inc.

Compiled Wed 18-Jul-07 04:52 by pt_team

Image text-base: 0x60080608, data-base: 0x6270CD50

 This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third-party authority to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.

 

A summary of U.S. laws governing Cisco cryptographic products may be found at:

http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

 

If you require further assistance please contact us by sending email to

export@cisco.com.

  

Cisco 1841 (revision 5.0) with 114688K/16384K bytes of memory.

Processor board ID FTX0947Z18E

M860 processor: part number 0, mask 49

6 FastEthernet/IEEE 802.3 interface(s)

191K bytes of NVRAM.

31360K bytes of ATA CompactFlash (Read/Write)

Cisco IOS Software, 1841 Software (C1841-ADVIPSERVICESK9-M), Version 12.4(15)T1, RELEASE SOFTWARE (fc2)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2007 by Cisco Systems, Inc.

Compiled Wed 18-Jul-07 04:52 by pt_team

 

         --- System Configuration Dialog ---

 从这里开始操作

Continue with configuration dialog? [yes/no]: n

 

 

Press RETURN to get started!

进入特权模式

Router>en

Router# conf t         ;进入配置模式

Router(config)#

Router(config)#int f0/0        ;进入要配置的路由器端口f0/0

Router(config-if)#ip address 192.168.10.1 255.255.255.0        ;为路由器端口配置IP地址,这个地址就是所连接网络的网关地址

Router(config-if)#no shutdown            ;打开端口。默认端口是关闭的,不打开就不能工作

 

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up

Router(config-if)#int f0/1     ;进入要配置的路由器端口f0/1

Router(config-if)#ip addr 192.168.20.1 255.255.255.0

Router(config-if)#no shutdown

 

%LINK-5-CHANGED: Interface FastEthernet0/1, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up

Router(config-if)#exit    ;返回到上一级

Router(config)#ip route 192.168.10.0 255.255.255.0 f0/0   ;配置静态路由

Router(config)#ip route 192.168.20.0 255.255.255.0 f0/1   ;配置静态路由

 

5. 测试网络连通性。

连通性测试

计算机

PC1

PC2

PC3

PC4

PC0

 

 

 

 

PC1

 

 

 

 

PC2

 

 

 

 

PC3

 

 

 

 

 

路由器基本配置

标签:cte   version   sof   开端口   工作   author   contain   静态路由   ios   

原文地址:http://www.cnblogs.com/liu-wang/p/6003338.html

(0)
(0)
   
举报
评论 一句话评论(0
登录后才能评论!
© 2014 mamicode.com 版权所有  联系我们:gaon5@hotmail.com
迷上了代码!