标签：style color os io strong 文件 for cti
比较WXS师兄同步传输固件和异步传输固件的区别，发现dscr.a51、fw.c文件完全一致，tcxmaster.c有一行存在区别，位于初始化函数TD_Init(void)中：
同步0x03，FIFO CLK来自外部，Slave FIFO工作在同步模式之下，Slave FIFO Interface；
异步0xCB，FIFO CLK来自内部，IFCLK频率选为48MHz，Slave FIFO工作在异步模式之下，Slave FIFO Interface；
?
下面是IFCONFG寄存器中bit 3的注释：
Bit3 ASYNC: Slave FIFO Asynchronous Mode.
0 The Slave FIFOs operate synchronously. A clock is supplied either internally or externally on the IFCLK pin; the FIFO control signals function as read and write enable signals for the clock signal.
1 The Slave FIFOs operate asynchronously. No clock signal input to IFCLK is required; the FIFO control signals function directly as read and write strobes.
下面是IFCONFG寄存器中bit 7\6的解释：
Bit7 IFCLKSRC: FIFO/GPIF Clock Source.
This bit selects the clock source for both the FIFOS and GPIF.
0 The external clock on the IFCLK pin is selected.
1 An internal 30 or 48 MHz (default) clock is used (default).
Bit6 3048MHZ: Internal FIFO/GPIF Clock Frequency
This bit selects the internal FIFO and GPIF clock frequency.
0 30 MHz (default)
?
总结：由于Bit3=1时，FIFO工作在异步模式下，根据注释，IFCLK并不需要时钟信号输入，所以异步模式中IFCONFG(7,6)=11没有什么实际意义，为什么WSX师兄要写成0xCB而不是直接写成0x0B呢？
（比较WXS师兄的）USB 同步传输和异步传输固件的区别,布布扣,bubuko.com
标签：style color os io strong 文件 for cti
原文地址：http://www.cnblogs.com/sunmaoduo/p/3917386.html
