码迷，mamicode.com
首页 > 其他好文 > 详细

RHEL 5.4下部署LVS(DR)+keepalived实现高性能高可用负载均衡

时间：2017-01-24 13:26:52      阅读：217      评论：0      收藏：0      [点我收藏+]

标签：pool   images   不同   限制   ctc   glob   ast   时间间隔   空格   

一、简介

LVS是Linux Virtual Server的简写，意即Linux虚拟服务器，是一个虚拟的服务器集群系统。本项目在1998年5月由章文嵩博士成立，是中国国内最早出现的自由软件项目之一。

目前有三种IP负载均衡技术（VS/NAT、VS/TUN和VS/DR）；十种调度算法（rr|wrr|lc|wlc|lblc|lblcr|dh|sh|sed|nq）。

Keepalived在这里主要用作RealServer的健康状态检查以及LoadBalance主机和BackUP主机之间failover的实现。

LVS+Keepalived能实现的功能：利用LVS控制器主备模式避免单点故障以及自动删除故障WEB服务器结点并当它恢复后再自动添加到群集中。

拓扑图：

技术分享

二、系统环境

系统平台：RHEL 5.4

LVS版本：ipvsadm-1.24

keepalived版本：keepalived-1.1.15

三、安装

1、在两台LVS Server上安装lvs、keepalived软件（LVS_MASTER & LVS_BACKUP）
lvs install -------------

[root@LVS-MASTER ~]# wget http://www.linuxvirtualserver.org/software/kernel-2.6/ipvsadm-1.24.tar.gz

[root@LVS-MASTER ~]# ln -s /usr/src/kernels/2.6.18-194.el5-i686//usr/src/linux/

[root@LVS-MASTER ~]# tar zxvf ipvsadm-1.24.tar.gz

[root@LVS-MASTER ~]# cd ipvsadm-1.24

[root@LVS-MASTER ipvsadm-1.24]# make && make install

Keepalived install -------------

[root@LVS-MASTER ~]# wget http://www.keepalived.org/software/keepalived-1.1.15.tar.gz

[root@LVS-MASTER ~]# tar zxvf keepalived-1.1.15.tar.gz

[root@LVS-MASTER ~]# cd keepalived-1.1.15

[root@LVS-MASTER keepalived-1.1.15]# ./configure && make && make install

######### 将keepalived做成启动服务，方便管理##########

[root@LVS-MASTER ~]# cp /usr/local/etc/rc.d/init.d/keepalived /etc/init.d/

[root@LVS-MASTER ~]# cp /usr/local/etc/sysconfig/keepalived /etc/sysconfig/

[root@LVS-MASTER ~]# mkdir /etc/keepalived/

[root@LVS-MASTER ~]# cp /usr/local/etc/keepalived/keepalived.conf /etc/keepalived/

[root@LVS-MASTER ~]# cp /usr/local/sbin/keepalived /usr/sbin/

[root@LVS-MASTER ~]# service keepalived start | stop

2、keepalived的配置

###################  MASTER ###################

! Configuration File for keepalived

global_defs {
   notification_email {
     root@linux.tang.chao               #设置报警邮件地址，可以设置多个，每行一个。
     mchina_tang@qq.com                 #需开启本机的sendmail服务
   }
   notification_email_from keepalived@localhost         #设置邮件的发送地址
   smtp_server 127.0.0.1                                #设置smtp server地址
   smtp_connect_timeout 30                              #设置连接smtp server的超时时间
   router_id LVS_DEVEL                                  #表示运行keepalived服务器的一个标识。发邮件时显示在邮件主题的信息
}

vrrp_instance VI_1 {
    state MASTER              #指定keepalived的角色，MASTER表示此主机是主服务器，BACKUP表示此主机是备用服务器
    interface eth0            #指定HA监测网络的接口
    virtual_router_id 51      #虚拟路由标识，这个标识是一个数字，同一个vrrp实例使用唯一的标识。即同一vrrp_instance下，MASTER和BACKUP必须是一致的
    priority 100              #定义优先级，数字越大，优先级越高，在同一个vrrp_instance下，MASTER的优先级必须大于BACKUP的优先级
    advert_int 1              #设定MASTER与BACKUP负载均衡器之间同步检查的时间间隔，单位是秒
    authentication {          #设置验证类型和密码
        auth_type PASS        #设置验证类型，主要有PASS和AH两种
        auth_pass 1111        #设置验证密码，在同一个vrrp_instance下，MASTER与BACKUP必须使用相同的密码才能正常通信
    }
    virtual_ipaddress {       #设置虚拟IP地址，可以设置多个虚拟IP地址，每行一个
        10.0.0.148
    }
}

virtual_server 10.0.0.148 80 {      #设置虚拟服务器，需要指定虚拟IP地址和服务端口，IP与端口之间用空格隔开
    delay_loop 6                    #设置运行情况检查时间，单位是秒
    lb_algo rr                      #设置负载调度算法，这里设置为rr，即轮询算法
    lb_kind DR                      #设置LVS实现负载均衡的机制，有NAT、TUN、DR三个模式可选
    persistence_timeout 50          #会话保持时间，单位是秒。这个选项对动态网页是非常有用的，为集群系统中的session共享提供了一个很好的解决方案。
                                    #有了这个会话保持功能，用户的请求会被一直分发到某个服务节点，直到超过这个会话的保持时间。
                                    #需要注意的是，这个会话保持时间是最大无响应超时时间，也就是说，用户在操作动态页面时，如果50秒内没有执行任何操作，
                                    #那么接下来的操作会被分发到另外的节点，但是如果用户一直在操作动态页面，则不受50秒的时间限制
    protocol TCP                    #指定转发协议类型，有TCP和UDP两种

    real_server 10.0.0.137 80 {     #配置服务节点1，需要指定real server的真实IP地址和端口，IP与端口之间用空格隔开
        weight 3                    #配置服务节点的权值，权值大小用数字表示，数字越大，权值越高，设置权值大小可以为不同性能的服务器
                                    #分配不同的负载，可以为性能高的服务器设置较高的权值，而为性能较低的服务器设置相对较低的权值，这样才能合理地利用和分配系统资源
        TCP_CHECK {                 #realserver的状态检测设置部分，单位是秒
            connect_timeout 10      #表示3秒无响应超时
            nb_get_retry 3          #表示重试次数
            delay_before_retry 3    #表示重试间隔
            connect_port 80
        }
    }
    real_server 10.0.0.139 80 {
        weight 3
        TCP_CHECK {
            connect_timeout 10
            nb_get_retry 3
            delay_before_retry 3
            connect_port 80
        }
    }
}

#################### BACKUP ###################

! Configuration File for keepalived

global_defs {
   notification_email {
     root@linux.tang.chao
     mchina_tang@qq.com
   }
   notification_email_from Alexandre.Cassen@firewall.loc
   smtp_server 127.0.0.1
   smtp_connect_timeout 30
   router_id LVS_DEVEL
}

vrrp_instance VI_1 {
    state BACKUP
    interface eth0
    virtual_router_id 51
    priority 99
    advert_int 1
    authentication {
        auth_type PASS
        auth_pass 1111
    }
    virtual_ipaddress {
        10.0.0.148
    }
}

virtual_server 10.0.0.148 80 {
    delay_loop 6
    lb_algo rr
    lb_kind DR
    persistence_timeout 50
    protocol TCP

    real_server 10.0.0.137 80 {
        weight 3
        TCP_CHECK {
            connect_timeout 10
            nb_get_retry 3
            delay_before_retry 3
            connect_port 80
        }
    }
    real_server 10.0.0.139 80 {
        weight 3
        TCP_CHECK {
            connect_timeout 10
            nb_get_retry 3
            delay_before_retry 3
            connect_port 80
        }
    }
}

3、在两台Web Server上执行realserver.sh脚本，为lo:0绑定VIP地址10.0.0.148、抑制ARP广播。

[root@web1 ~]# cat realserver.sh

#!/bin/bash
#description: Config realserver

VIP=10.0.0.148
 
/etc/rc.d/init.d/functions
 
case "$1" in
start)
       /sbin/ifconfig lo:0 $VIP netmask 255.255.255.255 broadcast $VIP
       /sbin/route add -host $VIP dev lo:0
       echo "1" >/proc/sys/net/ipv4/conf/lo/arp_ignore
       echo "2" >/proc/sys/net/ipv4/conf/lo/arp_announce
       echo "1" >/proc/sys/net/ipv4/conf/all/arp_ignore
       echo "2" >/proc/sys/net/ipv4/conf/all/arp_announce
       sysctl -p >/dev/null 2>&1
       echo "RealServer Start OK"
       ;;
stop)
       /sbin/ifconfig lo:0 down
       /sbin/route del $VIP >/dev/null 2>&1
       echo "0" >/proc/sys/net/ipv4/conf/lo/arp_ignore
       echo "0" >/proc/sys/net/ipv4/conf/lo/arp_announce
       echo "0" >/proc/sys/net/ipv4/conf/all/arp_ignore
       echo "0" >/proc/sys/net/ipv4/conf/all/arp_announce
       echo "RealServer Stoped"
       ;;
*)
       echo "Usage: $0 {start|stop}"
       exit 1
esac
 
exit 0

[root@web1 ~]# sh realserver.sh start

4、分别在LVS-MASTER、LVS-BACKUP上执行service keepalived start启动keepalived就可实现负载均衡及高可用集群了；

[root@LVS-MASTER keepalived]# service keepalived start

[root@LVS-MASTER keepalived]# ipvsadm -L
IP Virtual Server version 1.2.1 (size=4096)
Prot LocalAddress:Port Scheduler Flags
  -> RemoteAddress:Port           Forward Weight ActiveConn InActConn
TCP  10.0.0.148:http rr persistent 50
  -> 10.0.0.139:http              Route   3      0          0         
  -> 10.0.0.137:http              Route   3      0          0         
[root@LVS-MASTER keepalived]#

查看日志/var/log/messages

[root@LVS-MASTER keepalived]# tail -n 30/var/log/messages
Apr 19 03:59:58 LVS-MASTER avahi-daemon[2845]: Withdrawing address record for10.0.0.148 on eth0.
Apr 19 04:00:19 LVS-MASTER Keepalived: Starting Keepalived v1.2.1 (04/17,2012)
Apr 19 04:00:19 LVS-MASTER Keepalived: Starting Healthcheck child process,pid=5960
Apr 19 04:00:19 LVS-MASTER Keepalived_healthcheckers: Netlink reflector reportsIP 10.0.0.136 added
Apr 19 04:00:19 LVS-MASTER Keepalived_healthcheckers: Netlink reflector reportsIP 10.0.0.159 added
Apr 19 04:00:19 LVS-MASTER Keepalived_healthcheckers: Registering Kernelnetlink reflector
Apr 19 04:00:19 LVS-MASTER Keepalived_healthcheckers: Registering Kernelnetlink command channel
Apr 19 04:00:19 LVS-MASTER Keepalived_healthcheckers: Opening file ‘/etc/keepalived/keepalived.conf‘.
Apr 19 04:00:19 LVS-MASTER Keepalived_healthcheckers: Configuration is using :12257 Bytes
Apr 19 04:00:19 LVS-MASTER Keepalived_healthcheckers: Using LinkWatch kernelnetlink reflector...
Apr 19 04:00:19 LVS-MASTER Keepalived_healthcheckers: Activating healtcheckerfor service [10.0.0.137:80]
Apr 19 04:00:19 LVS-MASTER Keepalived_healthcheckers: Activating healtcheckerfor service [10.0.0.139:80]
Apr 19 04:00:19 LVS-MASTER Keepalived_vrrp: Netlink reflector reports IP10.0.0.136 added
Apr 19 04:00:19 LVS-MASTER Keepalived_vrrp: Netlink reflector reports IP10.0.0.159 added
Apr 19 04:00:19 LVS-MASTER Keepalived_vrrp: Registering Kernel netlinkreflector
Apr 19 04:00:19 LVS-MASTER Keepalived_vrrp: Registering Kernel netlink commandchannel
Apr 19 04:00:19 LVS-MASTER Keepalived_vrrp: Registering gratutious ARP sharedchannel
Apr 19 04:00:19 LVS-MASTER Keepalived_vrrp: Opening file‘/etc/keepalived/keepalived.conf‘.
Apr 19 04:00:19 LVS-MASTER Keepalived_vrrp: Configuration is using : 36698Bytes
Apr 19 04:00:19 LVS-MASTER Keepalived_vrrp: Using LinkWatch kernel netlinkreflector...
Apr 19 04:00:19 LVS-MASTER Keepalived_vrrp: VRRP sockpool: [ifindex(2),proto(112), fd(11,12)]
Apr 19 04:00:19 LVS-MASTER Keepalived: Starting VRRP child process, pid=5961
Apr 19 04:00:20 LVS-MASTER Keepalived_vrrp: VRRP_Instance(VI_1) Transition toMASTER STATE
Apr 19 04:00:21 LVS-MASTER Keepalived_vrrp: VRRP_Instance(VI_1) Entering MASTERSTATE
Apr 19 04:00:21 LVS-MASTER Keepalived_vrrp: VRRP_Instance(VI_1) settingprotocol VIPs.
Apr 19 04:00:21 LVS-MASTER Keepalived_vrrp: VRRP_Instance(VI_1) Sendinggratuitous ARPs on eth0 for 10.0.0.148
Apr 19 04:00:21 LVS-MASTER Keepalived_healthcheckers: Netlink reflector reportsIP 10.0.0.136 added
Apr 19 04:00:21 LVS-MASTER avahi-daemon[2845]: Registering new address recordfor 10.0.0.148 on eth0.
Apr 19 04:00:21 LVS-MASTER Keepalived_vrrp: Netlink reflector reports IP10.0.0.136 added
Apr 19 04:00:26 LVS-MASTER Keepalived_vrrp: VRRP_Instance(VI_1) Sendinggratuitous ARPs on eth0 for 10.0.0.148
[root@LVS-MASTER keepalived]#

四、测试

接下来做高可用性测试&故障切换测试......

####高可用性测试####

模拟故障，将LVS-MASTER上的keepalived服务停掉，然后观察LVS-BACKUP上的日志，信息如下

[root@LVS-BACKUP keepalived]# tail -f /var/log/messages
Apr 19 03:33:04 LVS-BACKUP Keepalived_vrrp: VRRP_Instance(VI_1)Transition to MASTER STATE
Apr 19 03:33:05 LVS-BACKUP Keepalived_vrrp: VRRP_Instance(VI_1) Entering MASTERSTATE
Apr 19 03:33:05 LVS-BACKUP Keepalived_vrrp: VRRP_Instance(VI_1) settingprotocol VIPs.
Apr 19 03:33:05 LVS-BACKUP Keepalived_vrrp: VRRP_Instance(VI_1) Sendinggratuitous ARPs on eth0 for 10.0.0.148
Apr 19 03:33:05 LVS-BACKUP Keepalived_vrrp: Netlink reflector reports IP10.0.0.157 added
Apr 19 03:33:05 LVS-BACKUP Keepalived_healthcheckers: Netlink reflector reportsIP 10.0.0.157 added
Apr 19 03:33:05 LVS-BACKUP avahi-daemon[2825]: Registering new address recordfor 10.0.0.148 on eth0.
Apr 19 03:33:10 LVS-BACKUP Keepalived_vrrp: VRRP_Instance(VI_1) Sendinggratuitous ARPs on eth0 for 10.0.0.148

从日志中可知，主机出现故障后，备机立刻检测到，此时备机变为MASTER角色，并且接管了主机的虚拟IP资源，最后将虚拟IP绑定在etho设备上。

将LVS-MASTER 上的keepalived服务开启后，LVS-BACKUP的日志状态。

Apr 19 03:34:02 LVS-BACKUP Keepalived_vrrp: VRRP_Instance(VI_1) Received higher prio advert
Apr 19 03:34:02 LVS-BACKUP Keepalived_vrrp: VRRP_Instance(VI_1)Entering BACKUP STATE
Apr 19 03:34:02 LVS-BACKUP Keepalived_vrrp: VRRP_Instance(VI_1) removing protocol VIPs.
Apr 19 03:34:02 LVS-BACKUP Keepalived_vrrp: Netlink reflector reports IP 10.0.0.157 removed
Apr 19 03:34:02 LVS-BACKUP Keepalived_healthcheckers: Netlink reflector reports IP 10.0.0.157 removed
Apr 19 03:34:02 LVS-BACKUP avahi-daemon[2825]: Withdrawing address record for 10.0.0.148 on eth0.

从日志可知，备机在检测到主机重新恢复正常后，释放了虚拟IP资源重新成为BACKUP角色

####故障切换测试####

故障切换是测试当某个节点出现故障后，Keepalived监制模块是否能及时发现然后屏蔽故障节点，同时将服务器转移到正常节点来执行。

将web2节点服务停掉，假设这个节点出现故障，然后主、备机日志信息如下

Apr 19 03:35:04 LVS-MASTER Keepalived_healthcheckers:TCP connection to [10.0.0.139:80] failed!!!
Apr 19 03:35:04 LVS-MASTER Keepalived_healthcheckers:Removing service [10.0.0.139:80] from VS [10.0.0.148:80]
Apr 19 03:35:04 LVS-MASTER Keepalived_healthcheckers: Remote SMTP server [127.0.0.1:25] connected.

[root@LVS-MASTER keepalived]# ipvsadm -L
IP Virtual Server version 1.2.1 (size=4096)
Prot LocalAddress:Port Scheduler Flags
  -> RemoteAddress:Port           Forward Weight ActiveConn InActConn
TCP  10.0.0.148:http rr persistent 50
  -> 10.0.0.137:http              Route   3      0          0         
[root@LVS-MASTER keepalived]#

从以上可以看出，Keepalived监控模块检测到10.0.0.139这台主机出现故障后，将些web2从集群系统中剔除掉了。 此时访问http://10.0.0.148只能看到web1了)

技术分享

重新启动web2节点的服务，日志信息如下：

Apr 19 03:38:22 LVS-MASTER Keepalived_healthcheckers:TCP connection to [10.0.0.139:80] success.
Apr 19 03:38:22 LVS-MASTER Keepalived_healthcheckers:Adding service [10.0.0.139:80] to VS [10.0.0.148:80]
Apr 19 03:38:22 LVS-MASTER Keepalived_healthcheckers: Remote SMTP server [127.0.0.1:25] connected.

[root@LVS-MASTERkeepalived]# ipvsadm -L
IP Virtual Server version 1.2.1 (size=4096)
Prot LocalAddress:Port Scheduler Flags
  -> RemoteAddress:Port           Forward Weight ActiveConn InActConn
TCP  10.0.0.148:http rr persistent 50
  -> 10.0.0.139:http              Route   3      0          0         
  -> 10.0.0.137:http              Route   3      0          0         
[root@LVS-MASTER keepalived]#

Keepalived监控模块检测到10.0.0.139这台主机恢复正常后，又将此节点加入集群系统中，再次访问就可以访问到web2页面了）

技术分享

CentOS 6.3下部署LVS(NAT)+keepalived实现高性能高可用负载均衡

》》：http://www.cnblogs.com/liuyansheng/p/6346840.html

 

RHEL 5.4下部署LVS(DR)+keepalived实现高性能高可用负载均衡

标签：pool   images   不同   限制   ctc   glob   ast   时间间隔   空格   

原文地址：http://www.cnblogs.com/liuyansheng/p/6346828.html
踩
(0)
赞
(0)
   
举报
评论 一句话评论（0）
登录后才能评论！
分享档案
更多>
2021年07月29日 (22)
2021年07月28日 (40)
2021年07月27日 (32)
2021年07月26日 (79)
2021年07月23日 (29)
2021年07月22日 (30)
2021年07月21日 (42)
2021年07月20日 (16)
2021年07月19日 (90)
2021年07月16日 (35)
周排行
mamicode.com排行更多图片
更多
友情链接
兰亭集智   国之画   百度统计   站长统计   阿里云   chrome插件   新版天听网
关于我们 - 联系我们 - 留言反馈
© 2014 mamicode.com 版权所有  联系我们:gaon5@hotmail.com
迷上了代码！