码迷,mamicode.com
首页 > 其他好文 > 详细

[TS36.523-1]:7.1.1.1

时间:2017-02-06 22:24:51      阅读:914      评论:0      收藏:0      [点我收藏+]

标签:异常   pcc   ges   span   1.5   discard   contain   lease   ons   

 

 

 

7.1.1.1.1                    Test Purpose (TP)

(1)

with { UE in E-UTRA RRC_IDLE state and after transmitting a RRCConnectionRequest message }

ensure that {

  when { UE receives a MAC PDU on DL SCH and addressed to its T-CRNTI but including a reserved value for LCID }

    then { UE discards the MAC PDU }

            }

 

(2)

with { UE in E-UTRA RRC_IDLE state and after transmitting a RRCConnectionRequest message }

ensure that {

 when { UE receives a MAC PDU on DL SCH and addressed to its T-CRNTI with value ‘00000’B as LCID }

    then { UE forwards to upper layers the disassembled and demultiplexed SDU on logical channel CCCH }

            }

 

 

Table 7.1.1.1.3.2-1: Main behaviour

St

Procedure

Message Sequence

TP

Verdict

UE log and comments

 

 

U - S

Message

 

 

 

 

EXCEPTION: Steps 1 to 4 shall be repeated for decreasing reserved LCID values from 01011 to 11011.

-

-

-

-

这里需要注意 step1-step4是一个循环的过程,意思就是说从01011(11) – 11011(27), 一共要有16个循环, 每个循环都会有paging.

1

The SS transmits a Paging message including a matched identity.

<--

-

-

-

-

2017 Jan  9  08:04:14.309  [62]  0xB0C0  LTE RRC OTA Packet  --  PCCH / Paging

Radio Bearer ID = 0, Physical Cell ID = 0

Freq = 300

SysFrameNum = 717, SubFrameNum = 9

PDU Number = PCCH Message,    Msg Length = 7

SIB Mask in SI =  0x00

 

Interpreted PDU:

 

value PCCH-Message ::=

{

  message c1 : paging :

      {

        pagingRecordList

        {

          {

            ue-Identity s-TMSI :

              {

                mmec ‘00000001‘B,

                m-TMSI ‘11000010 00110100 01010110 01111000‘B

              },

            cn-Domain ps

          }

        }

      }

}

2

The UE transmits an RRCConnectionRequest message.

-->

-

-

-

2017 Jan  9  08:04:14.311  [32]  0xB0C0  LTE RRC OTA Packet  --  UL_CCCH / RRCConnectionRequest
Pkt Version = 13
RRC Release Number.Major.minor = 12.7.4
Radio Bearer ID = 0, Physical Cell ID = 0
Freq = 300
SysFrameNum = N/A, SubFrameNum = 0
PDU Number = UL_CCCH Message,    Msg Length = 6
SIB Mask in SI =  0x00
 
Interpreted PDU:
 
value UL-CCCH-Message ::= 
{
  message c1 : rrcConnectionRequest : 
      {
        criticalExtensions rrcConnectionRequest-r8 : 
          {
            ue-Identity s-TMSI : 
              {
                mmec ‘00000001‘B,
                m-TMSI ‘11000010 00110100 01010110 01111000‘B
              },
            establishmentCause mt-Access,
            spare ‘0‘B
          }
      }

}

3

The SS Transmits a valid MAC PDU containing RRCConnectionSetup, and Contention Resolution Identity MAC Control Elementexcept for LCID in MAC Header set to reserved value 11011 or lower (depending on iteration number).

<--

MAC PDU

-

-

// RRC connection request 触发竞争性随机接入, Msg4里只含有CRI,没有RRC connection setup
2017 Jan  9  08:04:14.367  [2A]  0xB063  LTE MAC DL Transport Block
SubPacket - ( DL Transport Block Subpacket )
   Version = 2
   Subpacket Size = 44
   Downlink Transport Block V2:
      Number of samples = 2
      ------------------------------------------------------------------------------------------------
      |     |      |          |    |       |    |     |                        |               |     |
      |     |      |          |HARQ|DL TBS |RLC |HDR  |                        |               |     |
      |SFN  |Sub-FN|RNTI Type |ID  |(bytes)|PDUs|LEN  |Mac Hdr + CE            |LC ID          |LEN  |
      ------------------------------------------------------------------------------------------------
      |  723|     7|  T-C-RNTI|   5|      7|   0|    7| 1C 40 1C 23 45 67 84   |           CRID|    6|
 
2017 Jan  9  08:04:14.365  [18]  0xB16A  LTE Contention Resolution Message (MSG4) Report
Version              = 1
SFN                  = 723
Sub-fn               = 7
Contention Result    = Pass
UL ACK Timing SFN    = 724
UL ACK Timing Sub-fn = 1
 
// LCID = 11, 即使该LCID里的数据是RRC connection setup. UE也不做解析,直接丢弃
2017 Jan  9  08:04:14.467  [CC]  0xB063  LTE MAC DL Transport Block
SubPacket - ( DL Transport Block Subpacket )
   Version = 2
   Subpacket Size = 20
   Downlink Transport Block V2:
      Number of samples = 1
      ------------------------------------------------------------------------------------------------
      |     |      |          |    |       |    |     |                        |               |     |
      |     |      |          |HARQ|DL TBS |RLC |HDR  |                        |               |     |
      |SFN  |Sub-FN|RNTI Type |ID  |(bytes)|PDUs|LEN  |Mac Hdr + CE            |LC ID          |LEN  |
      ------------------------------------------------------------------------------------------------
      |  729|     2|    C-RNTI|   6|     26|   0|    1| 0B                     |             11|   -1|
 

 

EXCEPTION: In parallel with step 4, UE may execute parallel behaviour defined in table 7.1.1.1.3.2-2

-

-

-

-

 

4

Check: For 5 seconds after Step3, does the UE transmit RRCConnectionSetupComplete message?

-->

RRCConnectionSetupComplete

1

F

// T300 (1000ms)  expire

2017 Jan  9  08:04:15.311  [3D]  0x1FFB  Event  --  EVENT_LTE_RRC_TIMER_STATUS
Payload String = Timer Name = T300, Timer Value = 0, Timer State = Expire
 

// RRC 状态变为 Idle camped

2017 Jan  9  08:04:15.312  [3D]  0x1FFB  Event  --  EVENT_LTE_RRC_STATE_CHANGE
Payload String = RRC State = Idle Camped

 

5

The SS transmits a Paging message including a matched identity.

<--

-

-

-

-

6

The UE transmits an RRCConnectionRequest message.

-->

-

-

-

-

7

The SS transmits a valid MAC PDU containing RRCConnectionSetup, and Contention Resolution Identity MAC Control Element and LCID in MAC Header set correctly to CCCH 00000

<--

MAC PDU

-

-

-

8

Check: does the UE transmit an RRCConnectionSetupComplete message including SERVICE REQUEST message?

-->

RRCConnectionSetupComplete

2

P

P

9-12

Steps 6 to 9 of the generic radio bearer establishment procedure (TS 36.508 4.5.3.3-1) are executed to successfully complete the service request procedure.

-

-

-

-

-

 

【问题1Paging 中的S-TMSI 是哪来的?UE怎么知道寻呼的是自己呢?

【答】:(1) paging ID 有两种,一种是S-TMSI, 代表此意寻呼是一次正常的寻呼,一种是IMSI,表明本次寻呼是一次异常寻呼,用于网络侧的错误恢复,此种情况下UE

                          需要重新做一次附着(Attach)流程。

                    (2) 实际上Paging 中的S-TMSI是在UE Attach request 中带的,如果Paging中的S-TMSI UE发送的Attach request中的S-TMSI一致,则认为该寻呼是对本UE的寻呼。

                    (3) S-TMSI mme code(1个字节) + M-TMSI(4个字节)组成。

                    (4) IMSI MCC+MNC+MSIN 组成

2017 Jan  9  08:04:00.002  [CA]  0xB0ED  LTE NAS EMM Plain OTA Outgoing Message  --  Attach request Msg

prot_disc = 7 (0x7) (EPS mobility management messages)

msg_type = 65 (0x41) (Attach request)

lte_emm_msg

  emm_attach_request

    tsc = 0 (0x0) (cached sec context)

    nas_key_set_id = 0 (0x0)

    att_type = 2 (0x2) (combined EPS/IMSI attach)

    eps_mob_id

      id_type = 6 (0x6) (GUTI)

      odd_even_ind = 0 (0x0)

      Guti_1111 = 15 (0xf)

      mcc_1 = 0 (0x0)

      mcc_2 = 0 (0x0)

      mcc_3 = 1 (0x1)

      mnc_3 = 15 (0xf)

      mnc_1 = 0 (0x0)

      mnc_2 = 1 (0x1)

      MME_group_id = 32769 (0x8001)

      MME_code = 1 (0x1)

      m_tmsi = 3258209912 (0xc2345678)

 

【问题2】如果Paging Paging IDIMSI,请问eNB又是如何得到的呢?

【答】UE在初始接入的时候,UE 会在attach request 里携带IMSI.??

【问题3RRC  connection request里的原因是mt-Access, 这是什么意思,都有哪些建立原因?

【答】

 

 

 

[TS36.523-1]:7.1.1.1

标签:异常   pcc   ges   span   1.5   discard   contain   lease   ons   

原文地址:http://www.cnblogs.com/wangtaoneusoft/p/6371887.html

(0)
(0)
   
举报
评论 一句话评论(0
登录后才能评论!
© 2014 mamicode.com 版权所有  联系我们:gaon5@hotmail.com
迷上了代码!