system: network.system: - enabled: True - hostname: server1.example.com - gateway: 192.168.0.1 - gatewaydev: eth0 - nozeroconf: True - nisdomain: example.com - require_reboot: Trueeth0: network.managed: - enabled: True - type: eth - proto: none - ipaddr: 10.1.0.1 - netmask: 255.255.255.0 - dns: - 8.8.8.8 - 8.8.4.4eth0-range0: network.managed: - type: eth - ipaddr_start: 192.168.1.1 - ipaddr_end: 192.168.1.10 - clonenum_start: 10 - mtu: 9000bond0-range0: network.managed: - type: eth - ipaddr_start: 192.168.1.1 - ipaddr_end: 192.168.1.10 - clonenum_start: 10 - mtu: 9000eth1.0-range0: network.managed: - type: eth - ipaddr_start: 192.168.1.1 - ipaddr_end: 192.168.1.10 - clonenum_start: 10 - vlan: True - mtu: 9000bond0.1-range0: network.managed: - type: eth - ipaddr_start: 192.168.1.1 - ipaddr_end: 192.168.1.10 - clonenum_start: 10 - vlan: True - mtu: 9000.. note:: add support of ranged interfaces (vlan, bond and eth) for redhat system, Important:type must be eth.routes: network.routes: - name: eth0 - routes: - name: secure_network ipaddr: 10.2.0.0 netmask: 255.255.255.0 gateway: 10.1.0.3 - name: HQ_network ipaddr: 10.100.0.0 netmask: 255.255.0.0 gateway: 10.1.0.10eth2: network.managed: - enabled: True - type: slave - master: bond0eth3: network.managed: - enabled: True - type: slave - master: bond0eth4: network.managed: - enabled: True - type: eth - proto: dhcp - bridge: br0eth5: network.managed: - enabled: True - type: eth - proto: dhcp - noifupdown: True # Do not restart the interface # you need to reboot/reconfigure manualybond0: network.managed: - type: bond - ipaddr: 10.1.0.1 - netmask: 255.255.255.0 - mode: active-backup - proto: static - dns: - 8.8.8.8 - 8.8.4.4 - ipv6: - enabled: False - slaves: eth2 eth3 - require: - network: eth2 - network: eth3 - miimon: 100 - arp_interval: 250 - downdelay: 200 - lacp_rate: fast - max_bonds: 1 - updelay: 0 - use_carrier: on - xmit_hash_policy: layer2 - mtu: 9000 - autoneg: on - speed: 1000 - duplex: full - rx: on - tx: off - sg: on - tso: off - ufo: off - gso: off - gro: off - lro: offbond0.2: network.managed: - type: vlan - ipaddr: 10.1.0.2 - use: - network: bond0 - require: - network: bond0bond0.3: network.managed: - type: vlan - ipaddr: 10.1.0.3 - use: - network: bond0 - require: - network: bond0bond0.10: network.managed: - type: vlan - ipaddr: 10.1.0.4 - use: - network: bond0 - require: - network: bond0bond0.12: network.managed: - type: vlan - ipaddr: 10.1.0.5 - use: - network: bond0 - require: - network: bond0br0: network.managed: - enabled: True - type: bridge - proto: dhcp - bridge: br0 - delay: 0 - ports: eth4 - bypassfirewall: True - use: - network: eth4 - require: - network: eth4system: network.system: - enabled: True - hostname: server1.example.com - gateway: 192.168.0.1 - gatewaydev: eth0 - nozeroconf: True - nisdomain: example.com - require_reboot: True - apply_hostname: Truelo: network.managed: - name: lo - type: eth - onboot: yes - userctl: no - ipv6_autoconf: no - enable_ipv6: true - ipaddrs: - 127.0.0.1/8 - 10.1.0.4/32 - 10.1.0.12/32 - ipv6addrs: - fc00::1/128 - fc00::100/128.. note:: Apply changes to hostname immediately... versionadded:: 2015.5.0system: network.system: - hostname: server2.example.com - apply_hostname: True - retain_settings: True
本文出自 “渲染不变的昨天” 博客，谢绝转载！
原文地址：http://breaklinux.blog.51cto.com/8193722/1898105
