标签：erb contain targe 目标 本地 格式 gre 技术 建立
CentOS 6.5 安装部署iSCSi共享存储
一、前言
1、什么是iSCSI?
iSCSI技术是一种由IBM公司研究开发的，是一个供硬件设备使用的可以在IP协议的上层运行的SCSI指令集，这种指令集合可以实现在IP网络上运行SCSI协议，使其能够在诸如高速千兆以太网上进行路由选择。iSCSI技术是一种新储存技术，该技术是将现有SCSI接口与以太网络(Ethernet)技术结合，使服务器可与使用IP网络的储存装置互相交换资料。
iSCSI：Internet 小型计算机系统接口 （iSCSI：Internet Small Computer System Interface）。
Internet 小型计算机系统接口（iSCSI）是一种基于 TCP/IP的协议，用来建立和管理 IP 存储设备、主机和客户机等之间的相互连接，并创建存储区域网络（SAN）。SAN 使得 SCSI 协议应用于高速数据传输网络成为可能，这种传输以数据块级别（block-level）在多个数据存储网络间进行。
SCSI 结构基于客户/服务器模式，其通常应用环境是：设备互相靠近，并且这些设备由 SCSI 总线连接。iSCSI 的主要功能是在 TCP/IP 网络上的主机系统（启动器 initiator）和存储设备（目标器 target）之间进行大量数据的封装和可靠传输过程。此外，iSCSI 提供了在 IP 网络封装 SCSI 命令，且运行在 TCP 上。
[root@iSCSI_Server ~]# fdisk -l
Disk /dev/sda: 32.2 GB, 32212254720 bytes
64 heads, 32 sectors/track, 30720 cylinders
Units = cylinders of 2048 * 512 = 1048576 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000da3dc
Device Boot Start End Blocks Id System
/dev/sda1 * 2 501 512000 83 Linux
Partition 1 does not end on cylinder boundary.
/dev/sda2 502 30720 30944256 8e Linux LVM
Partition 2 does not end on cylinder boundary.
Disk /dev/sdb: 21.5 GB, 21474836480 bytes
64 heads, 32 sectors/track, 20480 cylinders
Units = cylinders of 2048 * 512 = 1048576 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
2、对硬盘进行分区并创建LVM卷：
[root@iSCSI_Server ~]# fdisk /dev/sdb Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel Building a new DOS disklabel with disk identifier 0x47756356. Changes will remain in memory only, until you decide to write them. After that, of course, the previous content won‘t be recoverable. Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite) WARNING: DOS-compatible mode is deprecated. It‘s strongly recommended to switch off the mode (command ‘c‘) and change display units to sectors (command ‘u‘). Command (m for help): p # 查看分区信息 Disk /dev/sdb: 21.5 GB, 21474836480 bytes 64 heads, 32 sectors/track, 20480 cylinders Units = cylinders of 2048 * 512 = 1048576 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x47756356 Device Boot Start End Blocks Id System Command (m for help): n #新建一个分区 Command action e extended p primary partition (1-4) e # 新建一个逻辑分区 Partition number (1-4): 4 # 卷标为 4 First cylinder (1-20480, default 1): Using default value 1 Last cylinder, +cylinders or +size{K,M,G} (1-20480, default 20480): Using default value 20480 Command (m for help): p # 查看信息 Disk /dev/sdb: 21.5 GB, 21474836480 bytes 64 heads, 32 sectors/track, 20480 cylinders Units = cylinders of 2048 * 512 = 1048576 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x47756356 Device Boot Start End Blocks Id System /dev/sdb4 1 20480 20971504 5 Extended Command (m for help): n # 新建逻辑卷 Command action l logical (5 or over) p primary partition (1-4) l # 选择l,逻辑卷 First cylinder (1-20480, default 1): Using default value 1 Last cylinder, +cylinders or +size{K,M,G} (1-20480, default 20480): Using default value 20480 Command (m for help): p # 查看信息 Disk /dev/sdb: 21.5 GB, 21474836480 bytes 64 heads, 32 sectors/track, 20480 cylinders Units = cylinders of 2048 * 512 = 1048576 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x47756356 Device Boot Start End Blocks Id System /dev/sdb4 1 20480 20971504 5 Extended /dev/sdb5 1 20480 20971488 83 Linux Command (m for help): w # 保存 The partition table has been altered! Calling ioctl() to re-read partition table. Syncing disks
[root@iSCSI_Server ~]# partprobe /dev/sdb # 使刚才的配置立即生效
[root@iSCSI_Server ~]# fdisk -l
Disk /dev/sda: 32.2 GB, 32212254720 bytes
64 heads, 32 sectors/track, 30720 cylinders
Units = cylinders of 2048 * 512 = 1048576 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000da3dc
Device Boot Start End Blocks Id System
/dev/sda1 * 2 501 512000 83 Linux
Partition 1 does not end on cylinder boundary.
/dev/sda2 502 30720 30944256 8e Linux LVM
Partition 2 does not end on cylinder boundary.
Disk /dev/sdb: 21.5 GB, 21474836480 bytes
64 heads, 32 sectors/track, 20480 cylinders
Units = cylinders of 2048 * 512 = 1048576 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x47756356
Device Boot Start End Blocks Id System
/dev/sdb4 1 20480 20971504 5 Extended
/dev/sdb5 1 20480 20971488 83 Linux
[root@iSCSI_Server ~]# cat /proc/partitions
major minor #blocks name
8 0 31457280 sda
8 1 512000 sda1
8 2 30944256 sda2
8 16 20971520 sdb
8 20 1 sdb4
8 21 20971488 sdb5
253 0 27795456 dm-0
253 1 3145728 dm-1
#注：看到以上标黄的信息证明已经创建逻辑卷成功！
接下来创建LVM卷
[root@iSCSI_Server ~]# pvcreate /dev/sdb5 # 创建PV
Physical volume "/dev/sdb5" successfully created
[root@iSCSI_Server ~]# vgcreate kvmvg /dev/sdb5 # 创建VG
Volume group "kvmvg" successfully created
[root@iSCSI_Server ~]# lvcreate -L 19G -n kvmlv kvmvg # 创建LV
Logical volume "kvmlv" created.
[root@iSCSI_Server ~]# lvs # 查看
LV VG Attr LSize Pool Origin Data% Meta% Move Log Cpy%Sync Convert
lv_root VolGroup -wi-ao---- 26.51g
lv_swap VolGroup -wi-ao---- 3.00g
kvmlv kvmvg -wi-a----- 19.00g
[root@iSCSI_Server ~]#
#注：看到以上标黄的信息证明已经创建成功！
[root@iSCSI_Server ~]# yum -y install epel-release
[root@iSCSI_Server ~]# yum -y install scsi-target-utils.x86_64
[root@iSCSI_Server ~]# vim /etc/tgt/targets.conf
#### 在 40行后添加以下信息#######
<target iqn.2017-03.com.zlyang:kvm.iscsi>
backing-store /dev/kvmvg/kvmlv
initiator-address 192.168.30.0/24
</target>
注：
iqn.2017-03.com.zlyang:kvm.iscsi ： 为共享名
iqn.2017-03.com.zlyang:kvm.iscsi ：共享卷名及路径
initiator-address 192.168.30.0/24 ：允许哪些地址访问
[root@iSCSI_Server ~]# service tgtd start
Starting SCSI target daemon: [ OK ]
[root@iSCSI_Server ~]# chkconfig tgtd on
[root@iSCSI_Server ~]# netstat -tnlt|grep 3260
tcp 0 0 0.0.0.0:3260 0.0.0.0:* LISTEN
tcp 0 0 :::3260 :::* LISTEN
6、添加防火墙规则
[root@iSCSI_Server ~]# iptables -I INPUT 4 -p tcp --dport 3260 -j ACCEPT [root@iSCSI_Server ~]# iptables-save
[root@iSCSI_Server ~]# service iptables save
[root@iSCSI_Server ~]# service iptables restart
[root@iSCSI_Client_1 ~]# fdisk -l Disk /dev/sda: 32.2 GB, 32212254720 bytes 64 heads, 32 sectors/track, 30720 cylinders Units = cylinders of 2048 * 512 = 1048576 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000da3dc Device Boot Start End Blocks Id System /dev/sda1 * 2 501 512000 83 Linux Partition 1 does not end on cylinder boundary. /dev/sda2 502 30720 30944256 8e Linux LVM Partition 2 does not end on cylinder boundary. Disk /dev/mapper/VolGroup-lv_root: 28.5 GB, 28462546944 bytes 255 heads, 63 sectors/track, 3460 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/mapper/VolGroup-lv_swap: 3221 MB, 3221225472 bytes 255 heads, 63 sectors/track, 391 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000
# 可以看出只有一块磁盘
2、安装Client软件
[root@iSCSI_Client_1 ~]# yum -y install epel-release
[root@iSCSI_Client_1 ~]# yum -y install iscsi-initiator-utils.x86_64
[root@iSCSI_Client_1 ~]# service iscsid start
[root@iSCSI_Client_1 ~]# chkconfig iscsid on
[root@iSCSI_Client_1 ~]# iscsiadm -m discovery -t st -p 192.168.30.133 192.168.30.133:3260,1 iqn.2017-03.com.zlyang:kvm.iscsi
5、挂载该磁盘
a、加载磁盘
[root@iSCSI_Client_1 ~]# iscsiadm -m node -T iqn.2017-03.com.zlyang:kvm.iscsi -p 192.168.30.133 -l Logging in to [iface: default, target: iqn.2017-03.com.zlyang:kvm.iscsi, portal: 192.168.30.133,3260] (multiple) Login to [iface: default, target: iqn.2017-03.com.zlyang:kvm.iscsi, portal: 192.168.30.133,3260] successful. [root@iSCSI_Client_1 ~]# echo "iscsiadm -m node -T iqn.2017-03.com.zlyang:kvm.iscsi -p 192.168.30.133 -l" >> /etc/rc.d/rc.local"
[root@iSCSI_Client_1 ~]# fdisk -l
Disk /dev/sdc: 20.4 GB, 20401094656 bytes
64 heads, 32 sectors/track, 19456 cylinders
Units = cylinders of 2048 * 512 = 1048576 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
注：看到此信息表示已经加载成功
b、分区格式化
[root@iSCSI_Client_1 ~]# mkfs.ext4 /dev/sdc mke2fs 1.41.12 (17-May-2010) /dev/sdc is entire device, not just one partition! Proceed anyway? (y,n) y Filesystem label= OS type: Linux Block size=4096 (log=2) Fragment size=4096 (log=2) Stride=0 blocks, Stripe width=0 blocks 1245184 inodes, 4980736 blocks 249036 blocks (5.00%) reserved for the super user First data block=0 Maximum filesystem blocks=4294967296 152 block groups 32768 blocks per group, 32768 fragments per group 8192 inodes per group Superblock backups stored on blocks: 32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208, 4096000 Writing inode tables: done Creating journal (32768 blocks): done Writing superblocks and filesystem accounting information: done This filesystem will be automatically checked every 35 mounts or 180 days, whichever comes first. Use tune2fs -c or -i to override. [root@iSCSI_Client_1 ~]#
c、挂载到本地
[root@iSCSI_Client_1 ~]# mount /dev/sdc /mnt
[root@iSCSI_Client_1 ~]# echo "mount /dev/sdc /mnt" >> /etc/rc.d/rc.local [root@iSCSI_Client_1 ~]# df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/VolGroup-lv_root 26G 2.6G 23G 11% / tmpfs 939M 0 939M 0% /dev/shm /dev/sda1 477M 52M 400M 12% /boot /dev/sdc 19G 44M 18G 1% /mnt [root@iSCSI_Client_1 ~]#
Client_1的所有配置已经配置完成，Client_2配置与Client_1基本相同，只是Client_2不需要再分区格式化了，直接加载及挂载就可以！
好了，部署已经全部完成，如果什么问题可以回复或发邮件到：DBA_Master@163.com
标签：erb contain targe 目标 本地 格式 gre 技术 建立
原文地址：http://www.cnblogs.com/zlyang/p/6484452.html
