码迷,mamicode.com
首页 > 其他好文 > 详细

思科OSPF NSSA配置实例

时间:2017-03-08 00:15:24      阅读:286      评论:0      收藏:0      [点我收藏+]

标签:icm   com   percent   span   color   eth   res   传递   解决   

实例如下图示:

技术分享

R1:
interface Loopback0
 ip address 1.1.1.1 255.255.255.255
interface FastEthernet0/0
 ip address 12.1.1.1 255.255.255.0
router ospf 1
 router-id 1.1.1.1
 area 1 nssa
 network 1.1.1.1 0.0.0.0 area 1
 network 12.1.1.0 0.0.0.255 area 1

R2:
interface Loopback0
 ip address 2.2.2.2 255.255.255.255
interface FastEthernet0/0
 ip address 12.1.1.2 255.255.255.0
interface FastEthernet0/1
 ip address 23.1.1.2 255.255.255.0
router ospf 1
 router-id 2.2.2.2
 area 1 nssa default-information-originate //解决外部rip路由无法传递过来。
 network 2.2.2.2 0.0.0.0 area 0
 network 12.1.1.0 0.0.0.255 area 1
 network 23.1.1.0 0.0.0.255 area 0

R3:
interface Loopback0
 ip address 3.3.3.3 255.255.255.255
interface FastEthernet0/0
 ip address 34.1.1.3 255.255.255.0
interface FastEthernet0/1
 ip address 23.1.1.3 255.255.255.0
router ospf 1
 router-id 3.3.3.3
 redistribute rip subnets
 network 3.3.3.3 0.0.0.0 area 0
 network 23.1.1.0 0.0.0.255 area 0
router rip
 version 2
 redistribute ospf 1 metric 2
 network 34.0.0.0
 no auto-summary

R4:
interface Loopback0
 ip address 4.4.4.4 255.255.255.255
interface FastEthernet0/0
 ip address 34.1.1.4 255.255.255.0
router rip
version 2 network
4.0.0.0 network 34.0.0.0 no auto-summary R4(config)#do show ip route rip 1.0.0.0/32 is subnetted, 1 subnets R 1.1.1.1 [120/2] via 34.1.1.3, 00:00:00, FastEthernet0/0 2.0.0.0/32 is subnetted, 1 subnets R 2.2.2.2 [120/2] via 34.1.1.3, 00:00:00, FastEthernet0/0 3.0.0.0/32 is subnetted, 1 subnets R 3.3.3.3 [120/2] via 34.1.1.3, 00:00:00, FastEthernet0/0 23.0.0.0/24 is subnetted, 1 subnets R 23.1.1.0 [120/2] via 34.1.1.3, 00:00:00, FastEthernet0/0 12.0.0.0/24 is subnetted, 1 subnets R 12.1.1.0 [120/2] via 34.1.1.3, 00:00:00, FastEthernet0/0 R4(config)#do ping 1.1.1.1 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 1.1.1.1, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 44/50/60 ms

 

思科OSPF NSSA配置实例

标签:icm   com   percent   span   color   eth   res   传递   解决   

原文地址:http://www.cnblogs.com/vincent-liang/p/6517300.html

(0)
(0)
   
举报
评论 一句话评论(0
登录后才能评论!
© 2014 mamicode.com 版权所有  联系我们:gaon5@hotmail.com
迷上了代码!