ad_封装_ads828

标签：address   else   set   封装   output   ram   case   blank   log   

module    ad_ctrl(
        clk,rst_n,ad_clk,
        ad_data,value_x,value_y,q_sig,wren,r_addr,w_addr
);

input                clk;    
input                rst_n;
input        [10:0]    value_x;
input        [10:0]    value_y;
output                ad_clk;
input        [9:0]    ad_data;
output                wren;
output        [7:0]    q_sig;
output    reg    [8:0]    r_addr;
output    reg    [8:0]    w_addr;

assign        ad_clk = ~clk;




wire        [7:0]    data_sig;
assign        data_sig = ad_data[9:2];
ram_ad    ram_ad_inst (
    .clock ( clk ),
    .data ( data_sig ),
    .rdaddress ( r_addr ),
    .wraddress ( w_addr ),
    .wren ( wren ),
    .q ( q_sig )
    );

//read ram
always @(posedge clk or negedge rst_n)
    if(!rst_n)
        r_addr <= ‘d0;
    else if((value_x >= 0 && value_x < 512) && (value_y >= 0 && value_y <256))
        r_addr <= value_x[8:0];
    else 
        r_addr <= ‘d0;
//write ram
reg        [1:0]    state;
always @(posedge clk or negedge rst_n)
    if(!rst_n)begin
        w_addr <= ‘d0;
        state <= ‘d0;
    end
    else if((value_x >= 0 && value_x < 512) && (value_y >= 256 && value_y <260))begin
        case(state)
        2‘d0:begin
            if(data_sig > 128)
                state <= 1;
            else
                state <= ‘d0;
        end
        2‘d1:begin
            if(w_addr > 510)begin
                state <= ‘d0;
                w_addr <= ‘d0;
            end
            else begin
                w_addr <= w_addr + 1‘d1;
                state <= 2‘d1;
            end
        end
        default:state <= ‘d0;
        endcase
    end
    else
        w_addr <= ‘d0;
        
//wren
reg        wren_r;
always @(posedge clk or negedge rst_n)
    if(!rst_n)
        wren_r <= 1‘d0;
    else if((value_x >= 0 && value_x < 512) && (value_y >= 0 && value_y <256))
        wren_r <= 1‘d0;
    else if((value_x >= 0 && value_x < 512) && (value_y >= 256 && value_y <260))
        wren_r <= 1‘d1;
    else
        wren_r <= 1‘d0;
assign    wren = wren_r;
endmodule

set_location_assignment PIN_AF14  -to clk

set_location_assignment PIN_AA14 -to rst_n
set_location_assignment PIN_AF26 -to ad_data[0] 
set_location_assignment PIN_AG25 -to ad_data[1]
                             
set_location_assignment PIN_AE24 -to ad_data[2] 
set_location_assignment PIN_AF25 -to ad_data[3]
                          
set_location_assignment PIN_AD24 -to ad_data[4] 
set_location_assignment PIN_AE23 -to ad_data[5]
                        
set_location_assignment PIN_AB21 -to ad_data[6]
set_location_assignment PIN_AC23 -to ad_data[7]
                            
set_location_assignment PIN_AB17 -to ad_data[8]
set_location_assignment PIN_AA21 -to ad_data[9]

set_location_assignment PIN_AG26 -to ad_clk
set_location_assignment PIN_B13 -to vga_b[0]
set_location_assignment PIN_G13 -to vga_b[1]
set_location_assignment PIN_H13 -to vga_b[2]
set_location_assignment PIN_F14 -to vga_b[3]
set_location_assignment PIN_H14 -to vga_b[4]
set_location_assignment PIN_F15 -to vga_b[5]
set_location_assignment PIN_G15 -to vga_b[6]
set_location_assignment PIN_J14 -to vga_b[7]
set_location_assignment PIN_F10 -to vga_blank
set_location_assignment PIN_A11 -to vga_clk
set_location_assignment PIN_J9  -to vga_g[0]
set_location_assignment PIN_J10 -to vga_g[1]
set_location_assignment PIN_H12 -to vga_g[2]
set_location_assignment PIN_G10 -to vga_g[3]
set_location_assignment PIN_G11 -to vga_g[4]
set_location_assignment PIN_G12 -to vga_g[5]
set_location_assignment PIN_F11 -to vga_g[6]
set_location_assignment PIN_E11 -to vga_g[7]
set_location_assignment PIN_B11 -to vga_hs
set_location_assignment PIN_A13 -to vga_r[0]
set_location_assignment PIN_C13 -to vga_r[1]
set_location_assignment PIN_E13 -to vga_r[2]
set_location_assignment PIN_B12 -to vga_r[3]
set_location_assignment PIN_C12 -to vga_r[4]
set_location_assignment PIN_D12 -to vga_r[5]
set_location_assignment PIN_E12 -to vga_r[6]
set_location_assignment PIN_F13 -to vga_r[7]
set_location_assignment PIN_C10 -to vga_sync
set_location_assignment PIN_D11 -to vga_vs

ad_封装_ads828

标签：address   else   set   封装   output   ram   case   blank   log   

原文地址：http://www.cnblogs.com/bixiaopengblog/p/6617045.html