个人Hadoop集群部署

时间：2017-04-09 14:49:41 阅读：204 评论：0 收藏：0 [点我收藏+]

标签：tran enable x64 rar closed 故障数据存储脚本中文

环境：centos 6.6 x64 （学习用3节点）

软件：jdk 1.7 + hadoop 2.7.3 + hive 2.1.1

环境准备：

1、安装必要工具

yum -y install openssh wget curl tree screen nano lftp htop mysql

2、使用163的yum源：

cd /etc/yum.repo.d/
wget http://mirrors.163.com/.help/CentOS7-Base-163.repo
#备份
mv /etc/yum.repos.d/CentOS-Base.repo /etc/yum.repos.d/CentOS-Base.repo.backup
mv CentOS7-Base-163.repo CentOS-Base.repo
#生成缓存
yum clean all
yum makecache

View Code

3、关闭图形界面init 3:

vim /etc/inittab  #将启动级别5更改为级别3字符界面启动

4、设置静态IP、修改主机名、hosts、

（1）规划

192.168.235.138 node1
192.168.235.139 node2
192.168.235.140 node3

下面在各个节点上，根据当前机器的规划设置IP、主机名、hosts

（2）静态IP（各个节点）

#方式一：使用setup在图形界面下设置
# setup 
#方式二：修改网络配置文件，一个完整的设置如下 
# cat /etc/sysconfig/network-scripts/ifcfg-Auto_eth1 
HWADDR=00:0C:29:2C:9F:4A
TYPE=Ethernet
BOOTPROTO=none
IPADDR=192.168.235.139
PREFIX=24
GATEWAY=192.168.235.1
DNS1=192.168.235.1
DEFROUTE=yes
IPV4_FAILURE_FATAL=yes
IPV6INIT=no
NAME="Auto eth1"
UUID=2753c781-4222-47bd-85e7-44877cde27dd
ONBOOT=yes
LAST_CONNECT=1491415778

View Code

（3）主机名（各个节点）

# cat /etc/sysconfig/network
NETWORKING=yes
HOSTNAME=node1      #修改hostname的值

View Code

（4）hosts（各个节点）

# cat /etc/hosts
# 在文件末尾添加如下内容
192.168.235.138 node1
192.168.235.139 node2
192.168.235.140 node3

View Code

5、关闭防火墙

# service iptables stop
# service iptables status
# chkconfig iptables off

View Code

6、建立普通用户

# useradd hadoop
# passwd hadoop
# visudo 
在root    ALL=(ALL)       ALL行下面增加：
hadoop  ALL=(ALL)       ALL

View Code

7、设置ssh免密码登录

方式一：自动部署脚本

# cat ssh.sh 
ERVERS="node1 node2 node3"
PASSWORD=123456
BASE_SERVER=192.168.235.138

yum -y install expect

auto_ssh_copy_id() {
    expect -c "set timeout -1;
        spawn ssh-copy-id $1;    
        expect {
            *(yes/no)* {send -- yes\r;exp_continue;}
            *assord:*  {send -- $2\r;exp_continue;}
            eof        {exit 0;}
        }"
}

ssh_copy_id_to_all() {
    for SERVER in $SERVERS
    do
        auto_ssh_copy_id $SERVER $PASSWORD
    done    
}

ssh_copy_id_to_all

View Code

方式二：手动设置

ssh-keygen -t  rsa  #生成公钥
scp ~/.ssh/id_rsa.pub hadoop@192.168.235.139:~/ #使用scp或scp-copy-id 分发公钥到其他节点上

View Code

集群规划与安装

1、节点规划

规划：
node01:NameNode、DataNode、NodeManager、
node02:ResourceManager、DataNode、NodeManager、JobHisotry
node03:SecondaryNameNode、DataNode、NodeManager、

说明：注意节点功能的划分，DataNode存储数据，NodeManager处理数据，需要放在同一节点上，避免占用大量的网络带宽。

此处仅用于个人机器，学习使用。事实上，一个典型的生产环境示例如下

7台节点参考配置hadoop2.x （HA： 高可用）

主机名    IP地址    进程
cloud01    192.168.2.31    namenode    zkfc          
cloud02    192.168.2.32    namenode    zkfc          
cloud03    192.168.2.33    resourcemanager               
cloud04    192.168.2.34    resourcemanager               
cloud05    192.168.2.35    journalNode      datanode     nodemanager     QuorumaPeerMain
cloud06    192.168.2.36    journalNode      datanode     nodemanager     QuorumaPeerMain
cloud07    192.168.2.37    journalNode      datanode     nodemanager     QuorumaPeerMain

 备注：   namenode： 管理元数据
              resourcemanager： 用于资源控制
              datanode ：用于存储数据
              nodemanager：用于数据计算
              journalNode： 用于共享元数据存储
              zkfc: ZooKeeper failOverSwitch ，namenode失败切换
              QuorumaPeerMain ： 是ZooKeeper启动进程

View Code

HA+zookeeper可以有效防止单点故障，实现自动故障转移。

摘自：http://blog.csdn.net/shenfuli/article/details/44889757

2、安装jdk、Hadoop

（1）安装JDK、Hadoop

上传软件包到服务器，并在软件包所在目录下编辑、运行如下脚本：

#!/bin/bash

tar -zxvf jdk-7u79-linux-x64.tar.gz -C /opt/
tar -zxvf hadoop-2.7.3.tar.gz /usr/local/

cat >> /etc/profile << EOF
export JAVA_HOME=/opt/jdk1.7.0_79/
export HADOOP_HOME=/usr/local/hadoop-2.7.3
export PATH=$PATH:$JAVA_HOME/bin:$HADOOP_HOME/bin:$HADOOP_HOE/sbin
EOF

source /etc/profile

View Code

（2）预设Hadoop工作目录

  mkdir -p hadoop/tmp
  mkdir -p hadoop/dfs/data
  mkdir -p hadoop/dfs/name
  mkdir -p hadoop/namesecondary

View Code

3、配置Hadoop

几个基本的配置文件如下：

# cd /usr/local/hadoop-2.7.3/etc/hadoop/
# ls -l | awk ‘{print $9}‘
core-site.xml
hadoop-env.sh
hdfs-site.xml
mapred-site.xml
slaves
yarn-site.xml

配置内容如下：

（1）core-site.xml

    <property>  
        <name>fs.defaultFS</name>  
        <value>hdfs://node1:9000</value>  
    </property>  
    <property>  
        <name>io.file.buffer.size</name>  
        <value>131072</value>  
    </property>  
    <property>  
        <name>hadoop.tmp.dir</name>  
        <value>file:/usr/hadoop/tmp</value>  
        <description>Abase for other temporary   directories.</description>  
    </property> 
        <property>
        <name>fs.trash.interval</name>
        <value>1440</value>    
    </property>

View Code

（2）hadoop-env.sh

export JAVA_HOME=/opt/jdk1.7.0_79/

（3）hdfs-site.xml

    <property>  
        <name>dfs.namenode.name.dir</name>  
        <value>file:///usr/hadoop/dfs/name</value> 
        <description></description>        
    </property>  
        <property>  
        <name>dfs.datanode.data.dir</name>  
        <value>file:///usr/hadoop/dfs/data</value>  
        <description></description>
    </property> 
    <property>  
        <name>dfs.namenode.secondary.http-address</name>  
        <value>node3:9001</value>  
        <description></description>
    </property>
    <property>
      <name>dfs.namenode.checkpoint.dir</name>
      <value>file:///usr/hadoop/namesecondary</value>
      <description></description>
    </property>        
 
    <property>  
        <name>dfs.replication</name>  
        <value>2</value> 
        <description>replication</description>
    </property>  
    <property>  
        <name>dfs.webhdfs.enabled</name>  
        <value>true</value>  
        <description></description>
    </property> 
    
    <property>
        <name>dfs.permissions</name>
        <value>false</value>
    </property>
    <property>
        <name>dfs.datanode.max.transfer.threads</name>
        <value>4096</value>
    </property>

View Code

（4）mapred-site.xml

    <property>
        <name>mapreduce.framework.name</name>
        <value>yarn</value>
    </property> 
    <property>  
        <name>mapreduce.jobhistory.address</name>  
        <value>node2:10020</value> 
        <description>MapReduce JobHistory Server host:port,Default port is 10020.</description>
    </property>  
    <property>  
        <name>mapreduce.jobhistory.webapp.address</name>  
        <value>node2:19888</value>  
        <description>MapReduce JobHistory Server Web UI host:port    Default port is 19888.</description>
    </property> 
    <property>
        <name>yarn.app.mapreduce.am.staging-dir</name>
        <value>/history</value>
    </property>
    <property>
        <name>mapreduce.jobhistory.done-dir</name>
        <value>${yarn.app.mapreduce.am.staging-dir}/history/done</value>
    </property>
    <property>
        <name>mapreduce.jobhistory.intermediate-done-dir</name>
        <value>${yarn.app.mapreduce.am.staging-dir}/history/done_intermediate</value>
    </property>
    <property>
        <name>mapreduce.map.log.level</name>
        <value>DEBUG</value>
    </property>
    <property>
        <name>mapreduce.reduce.log.level</name>
        <value>DEBUG</value>
    </property>

View Code

（5）slaves

node1
node2
node3

View Code

（6）yarn-site.xml

    <property>                                                                
        <name>yarn.nodemanager.aux-services.mapreduce.shuffle.class</name>  
        <value>org.apache.hadoop.mapred.ShuffleHandler</value>  
    </property>  

    <!--Configurations for ResourceManager and NodeManager:-->
    <!--
    <property>  
        <name>yarn.acl.enable</name>  
        <value>false</value> 
        <description>Enable ACLs? Defaults to false.</description>
    </property> 
    <property>  
        <name>yarn.admin.acl</name>  
        <value>Admin ACL</value> 
        <description>ACL to set admins on the cluster. ACLs are of for comma-separated-usersspacecomma-separated-groups. Defaults to special value of * which means anyone. Special value of just space means no one has access.</description>
    </property> 
    <property>  
        <name>yarn.log-aggregation-enable</name>  
        <value>false</value> 
        <description>Configuration to enable or disable log aggregation</description>
    </property> 
    -->
    
        <!--Configurations for ResourceManager:-->
    <property>  
        <name>yarn.resourcemanager.address</name>  
        <value>node2:8032</value>  
        <description>ResourceManager host:port for clients to submit jobs.host:port If set, overrides the hostname set in yarn.resourcemanager.hostname.</description>
    </property> 
    <property>  
        <name>yarn.resourcemanager.scheduler.address</name>  
        <value>node2:8030</value>  
        <description>ResourceManager host:port for ApplicationMasters to talk to Scheduler to obtain resources.host:port If set, overrides the hostname set in yarn.resourcemanager.hostname.</description>
    </property> 
    <property>  
        <name>yarn.resourcemanager.resource-tracker.address</name>  
        <value>node2:8031</value>  
        <description>ResourceManager host:port for NodeManagers:host:port If set, overrides the hostname set in yarn.resourcemanager.hostname.</description>
    </property> 
    <property>  
        <name>yarn.resourcemanager.admin.address</name>  
        <value>node2:8033</value>  
        <description>ResourceManager host:port for administrative commands.:host:port If set, overrides the hostname set in yarn.resourcemanager.hostname.</description>
    </property> 
    <property>  
        <name>yarn.resourcemanager.webapp.address</name>  
        <value>node2:8088</value>  
        <description>ResourceManager web-ui host:port.host:port If set, overrides the hostname set in yarn.resourcemanager.hostname.</description>
    </property>     
    <property>  
        <name>yarn.resourcemanager.hostname</name>  
        <value>node2</value>  
        <description>host Single hostname that can be set in place of setting all yarn.resourcemanager*address resources. Results in default ports for ResourceManager components.</description>
    </property> 
    <!--
    <property>  
        <name>yarn.resourcemanager.scheduler.class</name>  
        <value>ResourceManager Scheduler class.</value>  
        <description>CapacityScheduler (recommended), FairScheduler (also recommended), or FifoScheduler</description>
    </property> 
    
    <property>  
        <name>yarn.scheduler.minimum-allocation-mb</name>  
        <value>Minimum limit of memory to allocate to each container request at the Resource Manager.</value>  
        <description>In MBs</description>
    </property>     
    <property>  
        <name>yarn.scheduler.maximum-allocation-mb</name>  
        <value>Maximum limit of memory to allocate to each container request at the Resource Manager.</value>  
        <description>In MBs</description>
    </property>     
    <property>  
        <name>yarn.resourcemanager.nodes.include-path/ yarn.resourcemanager.nodes.exclude-path</name>  
        <value>List of permitted/excluded NodeManagers.</value>  
        <description>If necessary, use these files to control the list of allowable NodeManagers.</description>
    </property> 
    -->
    
    <!--Configurations for NodeManager:-->
    <!--
    <property>  
        <name>yarn.nodemanager.resource.memory-mb</name>  
        <value>Resource i.e. available physical memory, in MB, for given NodeManager</value>  
        <description>Defines total available resources on the NodeManager to be made available to running containers</description>
    </property>     
    <property>  
        <name>yarn.nodemanager.vmem-pmem-ratio</name>  
        <value>Maximum ratio by which virtual memory usage of tasks may exceed physical memory</value>  
        <description>The virtual memory usage of each task may exceed its physical memory limit by this ratio. The total amount of virtual memory used by tasks on the NodeManager may exceed its physical memory usage by this ratio.</description>
    </property> 
    <property>  
        <name>yarn.nodemanager.local-dirs</name>  
        <value>Comma-separated list of paths on the local filesystem where intermediate data is written.</value>  
        <description>Multiple paths help spread disk i/o.</description>
    </property> 
    <property>  
        <name>yarn.nodemanager.log-dirs</name>  
        <value>Comma-separated list of paths on the local filesystem where logs are written.</value>  
        <description>Multiple paths help spread disk i/o.</description>
    </property> 
    <property>  
        <name>yarn.nodemanager.log.retain-seconds</name>  
        <value>10800</value>  
        <description>Default time (in seconds) to retain log files on the NodeManager Only applicable if log-aggregation is disabled.</description>
    </property> 
    <property>  
        <name>yarn.nodemanager.remote-app-log-dir</name>  
        <value>/logs</value>  
        <description>HDFS directory where the application logs are moved on application completion. Need to set appropriate permissions. Only applicable if log-aggregation is enabled.</description>
    </property> 
    <property>  
        <name>yarn.nodemanager.remote-app-log-dir-suffix</name>  
        <value>logs</value>  
        <description>Suffix appended to the remote log dir. Logs will be aggregated to ${yarn.nodemanager.remote-app-log-dir}/${user}/${thisParam} Only applicable if log-aggregation is enabled.</description>
    </property>     
    -->
    <property>  
        <name>yarn.nodemanager.aux-services</name>  
        <value>mapreduce_shuffle</value>  
        <description>Shuffle service that needs to be set for Map Reduce applications.    </description>
    </property> 
    
    <property>  
        <name>yarn.log-aggregation-enable</name>  
        <value>true</value>  
        <description></description>
    </property>     
    <property>  
        <name>yarn.log.server.url</name>  
        <value>http://node2:19888/jobhistory/logs</value>  
        <description></description>
    </property>

View Code

注意：实际配置文件中尽量不要有中文

此配置仅供参考，使用时，去掉注释即可，也可根据自己情况增删配置

4、启动集群

（1）格式化NameNode

hadoop namenode -format  #{HADOOP_HOME}/bin

（2）启动、关闭集群

几个常用启动命令

# ls -l | awk ‘{print $9}‘
start-all.sh/stop-all.sh #启动、关闭所有进程
start-dfs.sh/stop-dfs.sh #启动、关闭hdfs
start-yarn.sh/stop-yarn.sh #启动、关闭yarn
mr-jobhistory-daemon.sh #作业查看
hadoop-daemon.sh / hadoop-daemons.sh 
yarn-daemon.sh / yarn-daemons.sh
start-balancer.sh/stop-balancer.sh #更新datanode的文件块分布情况

View Code

三种启动方式：

三种启动方式：
方式一：逐一启动（实际生产环境中的启动方式）
hadoop-daemon.sh start|stop namenode|datanode| journalnode
yarn-daemon.sh start |stop resourcemanager|nodemanager
方式二：分开启动
start-dfs.sh
start-yarn.sh
方式三：一起启动
start-all.sh
作业查看服务：    
mr-jobhistory-daemon.sh start historyserver

View Code

个人Hadoop集群部署

标签：tran enable x64 rar closed 故障数据存储脚本中文

原文地址：http://www.cnblogs.com/chinas/p/6684423.html

踩

(0)

评论一句话评论（0）

分享档案

更多>

2021年07月29日 (22)
2021年07月28日 (40)
2021年07月27日 (32)
2021年07月26日 (79)
2021年07月23日 (29)
2021年07月22日 (30)
2021年07月21日 (42)
2021年07月20日 (16)
2021年07月19日 (90)
2021年07月16日 (35)

周排行

个人Hadoop集群部署

环境准备：

1、安装必要工具

2、使用163的yum源：

3、 关闭图形界面init 3:

4、设置静态IP、修改主机名、hosts、

5、关闭防火墙

6、建立普通用户

7、设置ssh免密码登录

集群规划与安装

1、节点规划

2、安装jdk、Hadoop

4、启动集群

3、关闭图形界面init 3: