码迷,mamicode.com
首页 > 其他好文 > 详细

VGA时序驱动模块

时间:2014-08-24 11:36:22      阅读:263      评论:0      收藏:0      [点我收藏+]

标签:os   ar   amp   sp   on   ef   c   ca   bs   

`timescale 1ns/1ps

module VGA_Driver #(parameter   IMAGE_X = 1056,             

                  IMAGE_Y = 628,               

                  H_FRONT = 40,             

                  H_BACK  = 88,             

                  HSYNC_L = 128,             

                  V_FRONT = 1,            

                  V_BACK  = 23,             

                  VSYNC_L = 4,                          

                  DATAWIDTH = 8,             

                  OUTPUT_REG = 0             

                   )        

 (

  input          clk,  

  input          rst_n,    

  input[DATAWIDTH-1:0]     Rin,  

  input[DATAWIDTH-1:0]     Gin,  

  input[DATAWIDTH-1:0]     Bin,    

  output reg         data_req,  

  output reg         vsync,  

  output reg         hsync,  

  output reg         de,  

  output reg[DATAWIDTH-1:0]    Rout,  

  output reg[DATAWIDTH-1:0]    Gout,  

  output reg[DATAWIDTH-1:0]    Bout  

);  

 

reg[12:0] hcnt; reg[12:0] vcnt;

always@(posedge clk or negedge rst_n)

begin

if(~rst_n)  

  hcnt <= 13‘d0;

else if(hcnt==IMAGE_X-1)  

  hcnt <= 13‘d0;

else  

  hcnt <= hcnt + 13‘d1;

end

always@(posedge clk or negedge rst_n)

begin

if(~rst_n)  

  vcnt <= 12‘d0;

else if(hcnt==IMAGE_X-1)  

  begin  

  if(vcnt==IMAGE_Y-1)   

    vcnt <= 12‘d0;  

  else   

    vcnt <= vcnt + 12‘d1;  

  end

end

always@(posedge clk or negedge rst_n)

begin

if(~rst_n)  

  hsync <= 1‘b0;

else if((hcnt>=H_FRONT-1)&&(hcnt<H_FRONT+HSYNC_L-1))  

  hsync <= 1‘b1;

else  

  hsync <= 1‘b0;

end

always@(posedge clk or negedge rst_n)

begin

if(~rst_n)  

  vsync <= 1‘b0;

else if(hcnt==IMAGE_X-1)  

  begin  

  if((vcnt>=V_FRONT-1) && (vcnt< V_FRONT+VSYNC_L-1))   

    vsync <= 1‘b1;  

  else   vsync <= 1‘b0;  

  end

end

always@(posedge clk or negedge rst_n)

begin

if(~rst_n)  

  de <= 1‘b0;

else if(vcnt<V_FRONT+VSYNC_L+V_BACK)  

  de <= 1‘b0;

else if((hcnt>=H_FRONT+HSYNC_L+H_BACK-1)&&(hcnt<IMAGE_X-1))  

  de <= 1‘b1;

else  

  de <= 1‘b0;

end

always@(posedge clk or negedge rst_n)

begin

if(~rst_n)  

  data_req <= 1‘b0;

else if(vcnt<V_FRONT+VSYNC_L+V_BACK)

   data_req <= 1‘b0;

else if((hcnt>=H_FRONT+HSYNC_L+H_BACK-OUTPUT_REG-2)&& (hcnt<IMAGE_X-2-OUTPUT_REG))  

  data_req <= 1‘b1;

else  data_req <= 1‘b0;

end

always@(posedge clk or negedge rst_n)

begin

if(~rst_n)  

  Rout <= 10‘d0;

else  

  Rout <= Rin;

end

always@(posedge clk or negedge rst_n)

begin

if(~rst_n)  

  Gout <= 10‘d0;

else  

  Gout <= Gin;

end

always@(posedge clk or negedge rst_n)

begin

if(~rst_n)  

  Bout <= 10‘d0;

else  

  Bout <= Bin;

end

 

endmodule

VGA时序驱动模块

标签:os   ar   amp   sp   on   ef   c   ca   bs   

原文地址:http://www.cnblogs.com/wuqingjianke/p/3932613.html

(0)
(0)
   
举报
评论 一句话评论(0
登录后才能评论!
© 2014 mamicode.com 版权所有  联系我们:gaon5@hotmail.com
迷上了代码!