标签:adc ios ifcfg recovery nal 网卡名称 esc multicast init
1.ifconfig查看网卡名称为ens33
[root@localhost ~]# ifconfig ens33: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 192.168.137.2 netmask 255.255.255.0 broadcast 192.168.137.255 inet6 fe80::20c:29ff:fe8b:bbbe prefixlen 64 scopeid 0x20<link> ether 00:0c:29:8b:bb:be txqueuelen 1000 (Ethernet) RX packets 62 bytes 7151 (6.9 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 91 bytes 12163 (11.8 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10<host> loop txqueuelen 1 (Local Loopback) RX packets 336 bytes 28600 (27.9 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 336 bytes 28600 (27.9 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
2.编辑网卡的配置文件 vi /etc/sysconfig/network-scripts/ifcfg-ens33 将里面的NAME和DEVICE项修改为eth0
[root@localhost ~]# vi /etc/sysconfig/network-scripts/ifcfg-ens33
TYPE=Ethernet BOOTPROTO=static IPADDR=192.168.137.2 NETMASK=255.255.255.0 GATEWAY=192.168.137.1 DNS1=114.114.114.114 DNS2=8.8.8.8 DEFROUTE=yes PEERDNS=yes PEERROUTES=yes IPV4_FAILURE_FATAL=no IPV6INIT=yes IPV6_AUTOCONF=yes IPV6_DEFROUTE=yes IPV6_PEERDNS=yes IPV6_PEERROUTES=yes IPV6_FAILURE_FATAL=no IPV6_ADDR_GEN_MODE=stable-privacy NAME=eth0 UUID=972a1eb3-049f-4db2-80f5-7d8fd28ef76f DEVICE=eth0 ONBOOT=yes
3.重命名网卡配置文件ifcfg-ens33为ifcfg-eth0
[root@localhost ~]# cd /etc/sysconfig/network-scripts/ [root@localhost network-scripts]# mv ifcfg-ens33 ifcfg-eth0
4.编辑/etc/default/grub并加入“net.ifnames=0 biosdevname=0 ”到GRUBCMDLINELINUX变量
[root@localhost network-scripts]# vi /etc/default/grub
GRUB_TIMEOUT=5 GRUB_DISTRIBUTOR="$(sed ‘s, release .*$,,g‘ /etc/system-release)" GRUB_DEFAULT=saved GRUB_DISABLE_SUBMENU=true GRUB_TERMINAL_OUTPUT="console" GRUB_CMDLINE_LINUX="crashkernel=auto net.ifnames=0 biosdevname=0 rhgb quiet" GRUB_DISABLE_RECOVERY="true"
5.运行命令grub2-mkconfig -o /boot/grub2/grub.cfg 来重新生成GRUB配置并更新内核参数。
[root@localhost network-scripts]# grub2-mkconfig -o /boot/grub2/grub.cfg Generating grub configuration file ... Found linux image: /boot/vmlinuz-3.10.0-514.el7.x86_64 Found initrd image: /boot/initramfs-3.10.0-514.el7.x86_64.img Found linux image: /boot/vmlinuz-0-rescue-b7f83ca165964a47b8b283907b126140 Found initrd image: /boot/initramfs-0-rescue-b7f83ca165964a47b8b283907b126140.img done
6.重启系统
[root@localhost network-scripts]# reboot
7.验证
[root@localhost ~]# ifconfig eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 192.168.137.2 netmask 255.255.255.0 broadcast 192.168.137.255 inet6 fe80::e677:ea95:d090:ba39 prefixlen 64 scopeid 0x20<link> ether 00:0c:29:8b:bb:be txqueuelen 1000 (Ethernet) RX packets 104 bytes 13136 (12.8 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 107 bytes 12773 (12.4 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10<host> loop txqueuelen 1 (Local Loopback) RX packets 72 bytes 6252 (6.1 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 72 bytes 6252 (6.1 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
标签:adc ios ifcfg recovery nal 网卡名称 esc multicast init
原文地址:http://www.cnblogs.com/wyyalt/p/6860519.html