标签：drbd.not configured corosync packmaker crm pcs
系统：Centos 7.2 内核3.10.0-327.el7.x86_64 # 内核需要高于2.6.32
Drbd : 192.168.8.111：node1/dev/drdb0 /mydeta
192.168.8.112 : node2
Mysql_vip: 192.168.8.200 #下章实现
# 需要的软件包：
mariadb-5.5.53-linux-i686.tar.gz
drbd84-utils-8.9.1-1.el7.elrepo.x86_64.rpm
kmod-drbd84-8.4.6-1.el7.elrepo.x86_64.rpm
yum 需要安装的软件 pcs, ansible, crmsh, libxslt
# drbd是基于主机名通信的在/etc/hosts中增加
# 以本地ip地址如192.168.8.111 node1这样的方式添加一个地址一行、 127.0.0.1 不要填uname -n的名称
# 安装crmsh yum源如下 [root@node1 ~]# vim /etc/yum.repos.d/ha.repo
[network_ha-clustering_Stable]
name=Stable High Availability/Clustering packages (CentOS_CentOS-7)
type=rpm-md
baseurl=http://download.opensuse.org/repositories/network:/ha-clustering:/Stable/CentOS_CentOS-7/
gpgcheck=1
gpgkey=http://download.opensuse.org/repositories/network:/ha-clustering:/Stable/CentOS_CentOS-7//repodata/repomd.xml.key
enabled=1
# 安装crmsh 单台主机安装就行
yum -y install crmsh libxslt ansible pcs
# 主机互信
[root@node1 ~]# ssh-keygen
[root@node1 ~]# cat .ssh/id_rsa.pub > .ssh/authorized_keys
[root@node1 ~]# chmod go= .ssh/authorized_keys
[root@node1 ~]# scp -p .ssh/id_rsa.pub .ssh/authorized_keys 192.168.8.112:/root/.ssh/
# 出现以下错误
scp: /root/.ssh/: No such file or directory
# 解决方案
连接node2创建.ssh mkdir /root/.ssh
# drbd配置段
# 安装drbd前先准备两块硬盘 node1 跟node2 同样配置
rpm -ivh http://elrepo.reloumirrors.net/elrepo/el7/x86_64/RPMS/drbd84-utils-8.9.1-1.el7.elrepo.x86_64.rpm
yum -y install http://elrepo.reloumirrors.net/elrepo/el7/x86_64/RPMS/kmod-drbd84-8.4.6-1.el7.elrepo.x86_64.rpm
[root@node1 drbd-8.4.8-1]# modprobe drbd
[root@node1 drbd-8.4.8-1]# lsmod | grep drbd
drbd 405537 0
libcrc32c 12644 2 xfs,drbd
# 将新建的磁盘分区
[root@node1 sbin]# fdisk /dev/sdb# 自己新建就成、两边大小保持一致跟raid1一样
# 配置drbd
[root@node1 sbin]#
# drbd配置: http://502245466.blog.51cto.com/7559397/1298945
# drbd常见错误: http://www.j3j5.com/post-128.html
[root@node1 drbd.d]# vim global_common.conf
global {
usage-count no;
}
common {
protocol C;
handlers {
pri-on-incon-degr "/usr/lib/drbd/notify-pri-on-incon-degr.sh; /usr/lib/drbd/notify-emergency-reboot.sh; echo b > /proc/sysrq-trigger ; reboot -f";
pri-lost-after-sb "/usr/lib/drbd/notify-pri-lost-after-sb.sh; /usr/lib/drbd/notify-emergency-reboot.sh; echo b > /proc/sysrq-trigger ; reboot -f";
local-io-error "/usr/lib/drbd/notify-io-error.sh; /usr/lib/drbd/notify-emergency-shutdown.sh; echo o > /proc/sysrq-trigger ; halt -f";
}
startup {
}
options {
}
disk {
on-io-error detach;
}
net {
cram-hmac-alg "sha1";
shared-secret "xiong123";
}
syncer {
rate 1024M;
}
}
[root@node1 drbd.d]# vim mydrbd.res
resource mydrbd {
device /dev/drbd0;
disk /dev/sdb1;
meta-disk internal;
on node1{on为开启，node1为节点名称
address 192.168.8.111:7789;
}
on node2{
address 192.168.8.112:7789;
}
}
[root@node1 drbd.d]# scp mydrbd.res global_common.conf node2:/usr/local/drbd/etc/drbd.d/
############测试drbd是否成功######
[root@node1 drbd.d]# drbdadm create-md mydrbd
initializing activity log
NOT initializing bitmap
Writing meta data...
New drbd meta data block successfully created
# 配置启动否则corosync ocf无法直接定义drbd启动
[root@node1 sbin]# systemctl enable drbd.service
# 此处为测试drbd是否完整 两边都得同时启动
[root@node1 sbin]# systemctl start drbd.service
[root@node1 drbd.d]# drbdadm primary --force mydrbd # 将主机强制成为主节点
[root@node73 drbd.d]# drbd-overview
0:mydrbd/0 Connected Primary/Secondary UpToDate/UpToDate# Primary/Secondary 主从，另一端是Secondary/Primary
#格式磁盘
[root@node1 drbd.d]# mkfs.ext4 /dev/drbd0
# 挂载 两个节点都需要创建 /mydata/
[root@node1 drbd.d]# mount /dev/drbd0 /mydata/
[root@node1 drbd.d]# df -Th
/dev/drbd0 ext4 4.8G 20M 4.6G 1% /mydata
复制一个文件至/mydata目录中，并将主drbd设置为从
[root@node1 ~]# umount /mydata/
[root@node1 ~]# drbdadm secondary mydrbd
[root@node1 ~]# drbd-overview
0:mydrbd/0 Connected Secondary/Secondary UpToDate/Diskless
# 节点2操作配置 无需格式化/dev/drbd0
[root@node2 drbd.d]# drbdadm primary mydrbd
[root@node2 drbd.d]# mkdir /mydata
[root@node2 drbd.d]# mount /dev/drbd0 /mydata/
[root@node2 drbd.d]# cd /mydata/
[root@node2 mydata]# ls
issue lost+found
# 最后将drbd服务都停止
[root@node1 /]# umount /mydata/
[root@node1 /]# systemctl stop drbd
[root@node2 /]# systemctl stop drbd
############################测试结束########################################
# pcs配置drbd高可用
# 安装
# 安装pcs软件如果报/sbin/xxx命令的名字将crmsh.repo先改成crmsh.repo.bak 再安装
[root@node1 sbin]# ansible ha -m yum -a "name=pcs state=installed"
# pcs认证需要
[root@node1 sbin]# ansible ha -m shell -a ‘echo "xiong" | passwd --stdin hacluster‘
# 启动pcs服务
[root@node1 sbin]# ansible ha -m service -a "name=pcsd state=started enabled=yes"
# 认证集群服务
[root@node1 sbin]# pcs cluster auth node1 node2
Username: hacluster
Password:
node1: Authorized
node2: Authorized
# 添加一个集群名为myha 并设置组播地址为235.35.32.24
[root@node1 sbin]# pcs cluster setup --name myha node1 node2 --mcast0 235.35.32.24
# 检查集群服务是否正常
[root@node1 sbin]# corosync-cmapctl | grep mem
runtime.totem.pg.mrp.srp.memb_commit_token_rx (u64) = 4
runtime.totem.pg.mrp.srp.memb_commit_token_tx (u64) = 4
runtime.totem.pg.mrp.srp.memb_join_rx (u64) = 5
runtime.totem.pg.mrp.srp.memb_join_tx (u64) = 3
runtime.totem.pg.mrp.srp.memb_merge_detect_rx (u64) = 332
runtime.totem.pg.mrp.srp.memb_merge_detect_tx (u64) = 332
runtime.totem.pg.mrp.srp.members.1.config_version (u64) = 0
runtime.totem.pg.mrp.srp.members.1.ip (str) = r(0) ip(192.168.8.111)
runtime.totem.pg.mrp.srp.members.1.join_count (u32) = 1
runtime.totem.pg.mrp.srp.members.1.status (str) = joined
runtime.totem.pg.mrp.srp.members.2.config_version (u64) = 0
runtime.totem.pg.mrp.srp.members.2.ip (str) = r(0) ip(192.168.8.112)
runtime.totem.pg.mrp.srp.members.2.join_count (u32) = 1
runtime.totem.pg.mrp.srp.members.2.status (str) = joined
# 检查状态
[root@node1 sbin]# pcs status
Cluster name: myha
WARNING: no stonith devices and stonith-enabled is not false
Stack: corosync
Current DC: node1 (version 1.1.13-10.el7-44eb2dd) - partition with quorum
2 nodes and 0 resources configured
Online: [ node1 node2 ]
# 配置高可用
crm(live)configure# primitive mydrbd ocf:linbit:drbd params drbd_resource="mystore" op monitor role="Master" interval=30s timeout=30s op monitor role="Slave" timeout=30s op start timeout=240s op stop timeout=100s
####################正确模板##########################################
primitive mydatas ocf:linbit:drbd \
params drbd_resource=mystore \
op monitor role=Master interval=10s timeout=20s \
op monitor role=Slave interval=20s timeout=20s \
op start timeout=240s interval=0 \
op stop timeout=100s interval=0
######################################################################
crm(live)configure# ms mydrbd_master mydrbd meta clone-max=2 clone-node-max=1 master-max=1 master-node-max=1
crm(live)configure# verify #检查是否成功
crm(live)# status
Online: [ node73 node74 ]
Master/Slave Set: ms_mydatas [mydatas]
Masters: [ node73 ]
Slaves: [ node74 ]
# 配置文件挂载目录
crm(live)configure# primitive mount ocf:heartbeat:Filesystem params device="/dev/drbd0" directory="/mydata" fstype="ext4" op start timeout=60s op stop timeout=60s
# 定义排序约束 让mount一直跟着ms_mydatas的主
crm(live)configure# colocation mount_with_ms_mydatas inf: mount ms_mydatas:Master
# 检查是否成功
[root@node73 ~]# df -Th
/dev/drbd0 ext4 16G 45M 15G 1% /mydata
[root@node73 ~]# drbd-overview
0:mystore/0 Connected Primary/Secondary UpToDate/UpToDate /mydata ext4 16G 45M 15G 1%
####################### drbd主从配置文件###############################
primitive mount Filesystem \
params device="/dev/drbd0" directory="/mydata" fstype=ext4 \
op start timeout=60s interval=0 \
op stop timeout=60s interval=0
primitive mydatas ocf:linbit:drbd \
params drbd_resource=mystore \
op monitor role=Master interval=10s timeout=20s \
op monitor role=Slave interval=20s timeout=20s \
op start timeout=240s interval=0 \
op stop timeout=100s interval=0
ms ms_mydatas mydatas \
meta clone-max=2 clone-node-max=1 master-max=1 master-node-max=1 notify=true
colocation mount_with_ms_mydatas inf: mount ms_mydatas:Master
#########################################################################
# 错误整理
1、ERROR: error: unpack_resources:Resource start-up disabled since no STONITH resources have been defined
error: unpack_resources:Either configure some or disable STONITH with the stonith-enabled option
error: unpack_resources:NOTE: Clusters with shared data need STONITH to ensure data integrity
解决：crm(live)configure# property stonith-enabled=false
# 错误
[root@node1 drbd.d]# drbdadm primary mystore
0: State change failed: (-2) Need access to UpToDate data
Command ‘drbdsetup-84 primary 0‘ terminated with exit code 17
# 解决方案
[root@node1 drbd.d]# drbdadm primary mystore --force
# 错误
[root@node1 drbd.d]# pcs status
Error: cluster is not currently running on this node
# 解决方案
[root@node1 drbd.d]# pcs cluster start --all
# 启动主从失败
Failed Actions:
* mydrbd_stop_0 on node74 ‘not configured‘ (6): call=8, status=complete, exitreason=‘none‘,
last-rc-change=‘Wed May 24 15:27:42 2017‘, queued=0ms, exec=138ms
* mydrbd_stop_0 on node73 ‘not configured‘ (6): call=8, status=complete, exitreason=‘none‘,
last-rc-change=‘Wed May 24 15:27:41 2017‘, queued=0ms, exec=134ms
# 解决方案
设置各种超时时长都加上"s" primitive mydrbd ocf:linbit:drbd params drbd_resource="mystore" op monitor role="Master" interval=30s timeout=30s op monitor role="Slave" timeout=30s op start timeout=240s op stop timeout=100s
drbd yum包下载地址：http://elrepo.reloumirrors.net/elrepo/el7/x86_64/RPMS/
配置参阅链接： http://blog.csdn.net/qq_21127313/article/details/68210977
本文出自 “xiong” 博客，请务必保留此出处http://xiong51.blog.51cto.com/5239058/1929054
corosync+pacemaker+crm实现drbd高可用
标签：drbd.not configured corosync packmaker crm pcs
原文地址：http://xiong51.blog.51cto.com/5239058/1929054
