标签：tar man altered roc stop writing cgroup etc 故障
建立raid5 创建raid5 添加新1G热背盘，模拟磁盘故障，自动顶替 移除故障盘 停止阵列，重新激活阵列 再加新的1G热备盘，扩展阵列容量，从3个磁盘扩展到4个 环境：sde1，sde2，sde3，sde4，sde5，sde6 每个1G 创建六个分区，从第四个开始用扩展分区 [root@ZQ ~]# fdisk /dev/sde Welcome to fdisk (util-linux 2.23.2). Changes will remain in memory only, until you decide to write them. Be careful before using the write command. Device does not contain a recognized partition table Building a new DOS disklabel with disk identifier 0x8800cb6a. Command (m for help): p Disk /dev/sde: 10.7 GB, 10737418240 bytes, 20971520 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk label type: dos Disk identifier: 0x8800cb6a Device Boot Start End Blocks Id System Command (m for help): n Partition type: p primary (0 primary, 0 extended, 4 free) e extended Select (default p): p Partition number (1-4, default 1): 1 First sector (2048-20971519, default 2048): Using default value 2048 Last sector, +sectors or +size{K,M,G} (2048-20971519, default 20971519): +1G Partition 1 of type Linux and of size 1 GiB is set Command (m for help): n Partition type: p primary (1 primary, 0 extended, 3 free) e extended Select (default p): p Partition number (2-4, default 2): 2 First sector (2099200-20971519, default 2099200): Using default value 2099200 Last sector, +sectors or +size{K,M,G} (2099200-20971519, default 20971519): +1G Partition 2 of type Linux and of size 1 GiB is set Command (m for help): n Partition type: p primary (2 primary, 0 extended, 2 free) e extended Select (default p): p Partition number (3,4, default 3): 3 First sector (4196352-20971519, default 4196352): Using default value 4196352 Last sector, +sectors or +size{K,M,G} (4196352-20971519, default 20971519): +1G Partition 3 of type Linux and of size 1 GiB is set Command (m for help): n Partition type: p primary (3 primary, 0 extended, 1 free) e extended Select (default e): e Selected partition 4 First sector (6293504-20971519, default 6293504): Using default value 6293504 Last sector, +sectors or +size{K,M,G} (6293504-20971519, default 20971519): Using default value 20971519 Partition 4 of type Extended and of size 7 GiB is set Command (m for help): p Disk /dev/sde: 10.7 GB, 10737418240 bytes, 20971520 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk label type: dos Disk identifier: 0x8800cb6a Device Boot Start End Blocks Id System /dev/sde1 2048 2099199 1048576 83 Linux /dev/sde2 2099200 4196351 1048576 83 Linux /dev/sde3 4196352 6293503 1048576 83 Linux /dev/sde4 6293504 20971519 7339008 5 Extended Command (m for help): n All primary partitions are in use Adding logical partition 5 First sector (6295552-20971519, default 6295552): Using default value 6295552 Last sector, +sectors or +size{K,M,G} (6295552-20971519, default 20971519): +1G Partition 5 of type Linux and of size 1 GiB is set Command (m for help): n All primary partitions are in use Adding logical partition 6 First sector (8394752-20971519, default 8394752): Using default value 8394752 Last sector, +sectors or +size{K,M,G} (8394752-20971519, default 20971519): +1G Partition 6 of type Linux and of size 1 GiB is set Command (m for help): p Disk /dev/sde: 10.7 GB, 10737418240 bytes, 20971520 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk label type: dos Disk identifier: 0x8800cb6a Device Boot Start End Blocks Id System /dev/sde1 2048 2099199 1048576 83 Linux /dev/sde2 2099200 4196351 1048576 83 Linux /dev/sde3 4196352 6293503 1048576 83 Linux /dev/sde4 6293504 20971519 7339008 5 Extended /dev/sde5 6295552 8392703 1048576 83 Linux /dev/sde6 8394752 10491903 1048576 83 Linux Command (m for help): w The partition table has been altered! Calling ioctl() to re-read partition table. Syncing disks. [root@ZQ ~]# ll /dev/sde* brw-rw----. 1 root disk 8, 64 Jun 4 21:45 /dev/sde brw-rw----. 1 root disk 8, 65 Jun 4 21:45 /dev/sde1 brw-rw----. 1 root disk 8, 66 Jun 4 21:45 /dev/sde2 brw-rw----. 1 root disk 8, 67 Jun 4 21:45 /dev/sde3 brw-rw----. 1 root disk 8, 68 Jun 4 21:45 /dev/sde4 brw-rw----. 1 root disk 8, 69 Jun 4 21:45 /dev/sde5 brw-rw----. 1 root disk 8, 70 Jun 4 21:45 /dev/sde6 创建raid5 [root@ZQ ~]# mdadm -C -v /dev/md5 -l 5 -n 3 -c 32 -x 1 /dev/sde{1,2,3,4} mdadm: layout defaults to left-symmetric mdadm: layout defaults to left-symmetric mdadm: /dev/sde4 is not suitable for this array. #这里报错，因为第四个分区是扩展分区开始的 mdadm: create aborted [root@ZQ ~]# mdadm -C -v /dev/md5 -l 5 -n 3 -c 32 -x 1 /dev/sde{1,2,3,5} mdadm: layout defaults to left-symmetric mdadm: layout defaults to left-symmetric mdadm: size set to 1047552K mdadm: Defaulting to version 1.2 metadata mdadm: array /dev/md5 started. [root@ZQ ~]# cat /proc/mdstat Personalities : [raid0] [raid1] [raid6] [raid5] [raid4] md5 : active raid5 sde3[4] sde5[3](S) sde2[1] sde1[0] 2095104 blocks super 1.2 level 5, 32k chunk, algorithm 2 [3/3] [UUU] md1 : active raid1 sdc3[2] sdc2[1] 1047552 blocks super 1.2 [2/2] [UU] md0 : active raid0 sdb2[1] sdb1[0] 2095104 blocks super 1.2 512k chunks unused devices: <none> [root@ZQ ~]# mdadm -Ds ARRAY /dev/md0 metadata=1.2 name=ZQ:0 UUID=00d9284f:6fd6b3b0:afc571c6:c5441608 ARRAY /dev/md1 metadata=1.2 name=ZQ:1 UUID=137b8247:e0ced5a2:625805ac:e9b31692 ARRAY /dev/md5 metadata=1.2 spares=1 name=ZQ:5 UUID=32056d5a:35cf0716:fd761180:cc7b848b 停止md5 [root@ZQ ~]# mdadm -Ds ARRAY /dev/md0 metadata=1.2 name=ZQ:0 UUID=00d9284f:6fd6b3b0:afc571c6:c5441608 ARRAY /dev/md1 metadata=1.2 name=ZQ:1 UUID=137b8247:e0ced5a2:625805ac:e9b31692 ARRAY /dev/md5 metadata=1.2 spares=1 name=ZQ:5 UUID=32056d5a:35cf0716:fd761180:cc7b848b [root@ZQ ~]# mdadm -Ds > /etc/mdadm.conf [root@ZQ ~]# cat !$ cat /etc/mdadm.conf ARRAY /dev/md0 metadata=1.2 name=ZQ:0 UUID=00d9284f:6fd6b3b0:afc571c6:c5441608 ARRAY /dev/md1 metadata=1.2 name=ZQ:1 UUID=137b8247:e0ced5a2:625805ac:e9b31692 ARRAY /dev/md5 metadata=1.2 spares=1 name=ZQ:5 UUID=32056d5a:35cf0716:fd761180:cc7b848b [root@ZQ ~]# mdadm -S /dev/md5 mdadm: stopped /dev/md5 [root@ZQ ~]# cat /proc/mdstat Personalities : [raid0] [raid1] [raid6] [raid5] [raid4] md1 : active raid1 sdc3[2] sdc2[1] 1047552 blocks super 1.2 [2/2] [UU] md0 : active raid0 sdb2[1] sdb1[0] 2095104 blocks super 1.2 512k chunks unused devices: <none> 激活 [root@ZQ ~]# mdadm -As mdadm: Found some drive for an array that is already active: /dev/md1 mdadm: giving up. mdadm: /dev/md5 has been started with 3 drives and 1 spare. mdadm: Found some drive for an array that is already active: /dev/md1 mdadm: giving up. 扩展 [root@ZQ ~]# fdisk /dev/md5 Welcome to fdisk (util-linux 2.23.2). Changes will remain in memory only, until you decide to write them. Be careful before using the write command. Device does not contain a recognized partition table Building a new DOS disklabel with disk identifier 0xb42dd723. Command (m for help): n Partition type: p primary (0 primary, 0 extended, 4 free) e extended Select (default p): p Partition number (1-4, default 1): 1 First sector (2048-4190207, default 2048): Using default value 2048 Last sector, +sectors or +size{K,M,G} (2048-4190207, default 4190207): Using default value 4190207 Partition 1 of type Linux and of size 2 GiB is set Command (m for help): w The partition table has been altered! Calling ioctl() to re-read partition table. Syncing disks. [root@ZQ ~]# mkfs.ext4 /dev/md md0 md0p1 md1 md1p1 md5 md5p1 [root@ZQ ~]# mkfs.ext4 /dev/md5p1 mke2fs 1.42.9 (28-Dec-2013) Filesystem label= OS type: Linux Block size=4096 (log=2) Fragment size=4096 (log=2) Stride=8 blocks, Stripe width=16 blocks 131072 inodes, 523520 blocks 26176 blocks (5.00%) reserved for the super user First data block=0 Maximum filesystem blocks=536870912 16 block groups 32768 blocks per group, 32768 fragments per group 8192 inodes per group Superblock backups stored on blocks: 32768, 98304, 163840, 229376, 294912 Allocating group tables: done Writing inode tables: done Creating journal (8192 blocks): done Writing superblocks and filesystem accounting information: done [root@ZQ ~]# mkdir /raid5 [root@ZQ ~]# mount /dev/md5p1 /raid5 [root@ZQ ~]# df -h Filesystem Size Used Avail Use% Mounted on /dev/sda3 15G 3.6G 12G 24% / devtmpfs 474M 0 474M 0% /dev tmpfs 489M 156K 489M 1% /dev/shm tmpfs 489M 7.0M 482M 2% /run tmpfs 489M 0 489M 0% /sys/fs/cgroup /dev/sda1 197M 131M 67M 67% /boot tmpfs 98M 12K 98M 1% /run/user/1000 /dev/sr0 4.1G 4.1G 0 100% /run/media/zq/CentOS 7 x86_64 /dev/md0p1 2.0G 6.1M 1.9G 1% /raid0 /dev/md1p1 990M 2.6M 921M 1% /raid1 /dev/md5p1 2.0G 6.0M 1.9G 1% /raid5 [root@ZQ ~]# umount /raid5 [root@ZQ ~]# mdadm -a /dev/md5 /dev/sde6 mdadm: added /dev/sde6 [root@ZQ ~]# cat /proc/mdstat Personalities : [raid0] [raid1] [raid6] [raid5] [raid4] md5 : active raid5 sde6[5](S) sde1[0] sde5[3](S) sde3[4] sde2[1] 2095104 blocks super 1.2 level 5, 32k chunk, algorithm 2 [3/3] [UUU] md1 : active raid1 sdc3[2] sdc2[1] 1047552 blocks super 1.2 [2/2] [UU] md0 : active raid0 sdb2[1] sdb1[0] 2095104 blocks super 1.2 512k chunks unused devices: <none> [root@ZQ ~]# mdadm -G /dev/md5 -n 4 [root@ZQ ~]# cat /proc/mdstat Personalities : [raid0] [raid1] [raid6] [raid5] [raid4] md5 : active raid5 sde6[5] sde1[0] sde5[3](S) sde3[4] sde2[1] 3142656 blocks super 1.2 level 5, 32k chunk, algorithm 2 [4/4] [UUUU] md1 : active raid1 sdc3[2] sdc2[1] 1047552 blocks super 1.2 [2/2] [UU] md0 : active raid0 sdb2[1] sdb1[0] 2095104 blocks super 1.2 512k chunks unused devices: <none> [root@ZQ ~]# cat /etc/mdadm.conf ARRAY /dev/md0 metadata=1.2 name=ZQ:0 UUID=00d9284f:6fd6b3b0:afc571c6:c5441608 ARRAY /dev/md1 metadata=1.2 name=ZQ:1 UUID=137b8247:e0ced5a2:625805ac:e9b31692 ARRAY /dev/md5 metadata=1.2 spares=1 name=ZQ:5 UUID=32056d5a:35cf0716:fd761180:cc7b848b
标签：tar man altered roc stop writing cgroup etc 故障
原文地址：http://www.cnblogs.com/zq6041/p/6942438.html
