码迷,mamicode.com
首页 > 其他好文 > 详细

zookeeper以及集群的搭建

时间:2017-06-23 10:14:04      阅读:144      评论:0      收藏:0      [点我收藏+]

标签:local   direct   imu   ase   count   each   stat   dmi   for   

今天我来写一写zookeeper集群的搭建流程

1.zookeeper的搭建不难,难的是对他的理解以及良好的使用.单机版的zookeeper只需要解压后直接命令 启动即可 解压zookeeper,tar -zxvf zookeeper-3.4.6.tar.g

2.集群的话,需要复制文件 把单机版的zookeeper-3.4.6拷贝到/usr/local/solrcloud下,复制三份分别并将目录名改为zookeeper1、zookeeper2、zookeeper3

3.进入zookeeper1文件夹,创建data目录。并在data目录中创建一个myid文件内容为“1”(echo 1 >> data/myid)。

4.进入conf文件夹,把zoo_sample.cfg改名为zoo.cfg

5.修改zoo.cfg。 修改: dataDir=/usr/local/solrcloud/zookeeper1/data clientPort=2181(zookeeper2中为2182、zookeeper3中为2183) 添加: server.1=192.168.25.150:2881:3881 server.2=192.168.25.150:2882:3882 server.3=192.168.25.150:2883:3883

6.接下来把剩下的两个全部按照这个方式来修改 注意:第二个的端口号和路径要改,而添加的server不变 后面端口依次改为2182和2183

# The number of milliseconds of each tick tickTime=2000 # The number of ticks that the initial # synchronization phase can take initLimit=10 # The number of ticks that can pass between # sending a request and getting an acknowledgement syncLimit=5 # the directory where the snapshot is stored. # do not use /tmp for storage, /tmp here is just # example sakes. dataDir=/usr/local/solrcloud/zookeeper1/data # the port at which the clients will connect clientPort=2181 # the maximum number of client connections. # increase this if you need to handle more clients #maxClientCnxns=60 # # Be sure to read the maintenance section of the # administrator guide before turning on autopurge. # # http://zookeeper.apache.org/doc/current/zookeeperAdmin.html#sc_maintenance # # The number of snapshots to retain in dataDir #autopurge.snapRetainCount=3 # Purge task interval in hours # Set to "0" to disable auto purge feature #autopurge.purgeInterval=1 server.1=192.168.25.150:2881:3881 server.2=192.168.25.150:2882:3882 server.3=192.168.25.150:2883:3883

7.修改完成后分别启动三个zookeeper /usr/local/solrcloud/zookeeper1/bin/zkServer.sh start /usr/local/solrcloud/zookeeper2/bin/zkServer.sh start /usr/local/solrcloud/zookeeper3/bin/zkServer.sh start

8.查看zookeeper的状态 /usr/local/solrcloud/zookeeper1/bin/zkServer.sh status /usr/local/solrcloud/zookeeper2/bin/zkServer.sh status /usr/local/solrcloud/zookeeper3/bin/zkServer.sh status

9.最后记得添加端口号,或者关闭防火墙

zookeeper以及集群的搭建

标签:local   direct   imu   ase   count   each   stat   dmi   for   

原文地址:http://www.cnblogs.com/qiaoqiaodi/p/7067927.html

(0)
(0)
   
举报
评论 一句话评论(0
登录后才能评论!
© 2014 mamicode.com 版权所有  联系我们:gaon5@hotmail.com
迷上了代码!