标签：进程 __user struct 字符设备驱动程序 handle nis sync head 动作
当应用程序调用poll时，会相应的调用内核空间的sys_poll
sys_poll
do_sys_poll
poll_initwait(&table)
void poll_initwait(struct poll_wqueues *pwq)
init_poll_funcptr(&pwq->pt, __pollwait);//下面这个函数为该函数的具体实现
static inline void init_poll_funcptr(poll_table *pt, poll_queue_proc qproc)
{
pt->qproc = qproc;//此时就相当于：pt->qproc = __pollwait，所以指针
//qproc就指向了函数__pollwait
}
//接下来看一下__pollwait的具体实现：
static void __pollwait(struct file *filp, wait_queue_head_t *wait_address,poll_table *p)
{
struct poll_table_entry *entry = poll_get_entry(p);
if (!entry)
return;
get_file(filp);
entry->filp = filp;
entry->wait_address = wait_address;
init_waitqueue_entry(&entry->wait, current);
add_wait_queue(wait_address, &entry->wait);
}
从上面的分析可知，poll_initwait(&table)函数只实现了将当前进程加入到wait_address队列中
do_poll(nfds, head, &table, timeout)，会进入一个死循环，在死循环里调用了do_pollfd(pfd, pt）
do_pollfd(pfd, pt）
mask = file->f_op->poll(file, pwait);//unsigned int (*poll) (struct file *, struct poll_table_struct *);
在驱动程序中的file_operations结构体中，定义了.poll=fifth_drv_poll, 从而使得poll指针指向了函数fifth_drv_poll,
所以在执行poll函数时，实际上是调用了驱动程序中的fifth_drv_poll这个函数。在fifth_drv_poll这个函数中，会
调用poll_wait(file, &button_waitq, wait),看一下该函数的具体实现：
void poll_wait(struct file * filp, wait_queue_head_t * wait_address, poll_table *p)
{
if (p && wait_address)
p->qproc(filp, wait_address, p);//在上面已经分析过，p->qproc指向函数__pollwait。
因此这条语句相当于执行__pollwait(filp, wait_address, p)，从上面的分析可以看出，将当前进程加入到
wait_address等待队列中。
}
注意：在我们的驱动程序中会有一个返回值，假设为mask1.那么此时mask=mask1,而mask又将返回给do_pollfd(pfd, pt）这个函数。内核中有这样一段程序：
for(;;)
{
if (do_pollfd(pfd, pt)) {
count++;
pt = NULL;
}如果mask非零，count++，表示按键按下。
/*若count不为0或者超时或者有事件发生则会跳出死循环*/
if (count || !*timeout || signal_pending(current))
break;
/*若count为0且未超时且无事件发生则会休眠__timeout时间*/
schedule_timeout(__timeout);当休眠到timeout这段时间之后，还是没有任何事件发生，会再次进入循环中
，当到达if (count || !*timeout || signal_pending(current))时，会跳出循环。
}
应用程序：
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <stdio.h>
#include <poll.h>
#include <signal.h>
#include <sys/types.h>
#include <unistd.h>
#include <fcntl.h>
int fd;
void my_signal_fun(int signum)
{
unsigned char key_val;
read(fd, &key_val, 1);
printf("key_val: 0x%x\n", key_val);
}
int main(int argc, char **argv)
{
unsigned char key_val;
int ret;
int Oflags;
signal(SIGIO, my_signal_fun);
fd = open("/dev/buttons", O_RDWR);
if (fd < 0)
{
printf("can‘t open!\n");
}
fcntl(fd, F_SETOWN, getpid());
Oflags = fcntl(fd, F_GETFL);
fcntl(fd, F_SETFL, Oflags | FASYNC);
while (1)
{
sleep(1000);
}
return 0;
}
驱动程序：
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/fs.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/irq.h>
#include <asm/uaccess.h>
#include <asm/irq.h>
#include <asm/io.h>
#include <asm/arch/regs-gpio.h>
#include <asm/hardware.h>
#include <linux/poll.h>
static struct class *fifthdrv_class;
static struct class_device *fifthdrv_class_dev;
volatile unsigned long *gpfcon;
volatile unsigned long *gpfdat;
volatile unsigned long *gpgcon;
volatile unsigned long *gpgdat;
static DECLARE_WAIT_QUEUE_HEAD(button_waitq);
/* 中断事件标志, 中断服务程序将它置1，fifth_drv_read将它清0 */
static volatile int ev_press = 0;
static struct fasync_struct *button_async;
struct pin_desc{
unsigned int pin;
unsigned int key_val;
};
/* 键值: 按下时, 0x01, 0x02, 0x03, 0x04 */
/* 键值: 松开时, 0x81, 0x82, 0x83, 0x84 */
static unsigned char key_val;
struct pin_desc pins_desc[4] = {
{S3C2410_GPF0, 0x01},
{S3C2410_GPF2, 0x02},
{S3C2410_GPG3, 0x03},
{S3C2410_GPG11, 0x04},
};
/*
* 确定按键值
*/
static irqreturn_t buttons_irq(int irq, void *dev_id)
{
struct pin_desc * pindesc = (struct pin_desc *)dev_id;
unsigned int pinval;
pinval = s3c2410_gpio_getpin(pindesc->pin);
if (pinval)
{
/* 松开 */
key_val = 0x80 | pindesc->key_val;
}
else
{
/* 按下 */
key_val = pindesc->key_val;
}
ev_press = 1; /* 表示中断发生了 */
wake_up_interruptible(&button_waitq); /* 唤醒休眠的进程 */
kill_fasync (&button_async, SIGIO, POLL_IN);
return IRQ_RETVAL(IRQ_HANDLED);
}
static int fifth_drv_open(struct inode *inode, struct file *file)
{
/* 配置GPF0,2为输入引脚 */
/* 配置GPG3,11为输入引脚 */
request_irq(IRQ_EINT0, buttons_irq, IRQT_BOTHEDGE, "S2", &pins_desc[0]);
request_irq(IRQ_EINT2, buttons_irq, IRQT_BOTHEDGE, "S3", &pins_desc[1]);
request_irq(IRQ_EINT11, buttons_irq, IRQT_BOTHEDGE, "S4", &pins_desc[2]);
request_irq(IRQ_EINT19, buttons_irq, IRQT_BOTHEDGE, "S5", &pins_desc[3]);
return 0;
}
ssize_t fifth_drv_read(struct file *file, char __user *buf, size_t size, loff_t *ppos)
{
if (size != 1)
return -EINVAL;
/* 如果没有按键动作, 休眠 */
wait_event_interruptible(button_waitq, ev_press);
/* 如果有按键动作, 返回键值 */
copy_to_user(buf, &key_val, 1);
ev_press = 0;
return 1;
}
int fifth_drv_close(struct inode *inode, struct file *file)
{
free_irq(IRQ_EINT0, &pins_desc[0]);
free_irq(IRQ_EINT2, &pins_desc[1]);
free_irq(IRQ_EINT11, &pins_desc[2]);
free_irq(IRQ_EINT19, &pins_desc[3]);
return 0;
}
static unsigned fifth_drv_poll(struct file *file, poll_table *wait)
{
unsigned int mask = 0;
poll_wait(file, &button_waitq, wait); // 不会立即休眠
if (ev_press)
mask |= POLLIN | POLLRDNORM;
return mask;
}
static int fifth_drv_fasync (int fd, struct file *filp, int on)
{
printk("driver: fifth_drv_fasync\n");
return fasync_helper (fd, filp, on, &button_async);
}
static struct file_operations sencod_drv_fops = {
.owner = THIS_MODULE, /* 这是一个宏，推向编译模块时自动创建的__this_module变量 */
.open = fifth_drv_open,
.read = fifth_drv_read,
.release = fifth_drv_close,
.poll = fifth_drv_poll,
.fasync = fifth_drv_fasync,
};
int major;
static int fifth_drv_init(void)
{
major = register_chrdev(0, "fifth_drv", &sencod_drv_fops);
fifthdrv_class = class_create(THIS_MODULE, "fifth_drv");
fifthdrv_class_dev = class_device_create(fifthdrv_class, NULL, MKDEV(major, 0), NULL, "buttons"); /* /dev/buttons */
gpfcon = (volatile unsigned long *)ioremap(0x56000050, 16);
gpfdat = gpfcon + 1;
gpgcon = (volatile unsigned long *)ioremap(0x56000060, 16);
gpgdat = gpgcon + 1;
return 0;
}
static void fifth_drv_exit(void)
{
unregister_chrdev(major, "fifth_drv");
class_device_unregister(fifthdrv_class_dev);
class_destroy(fifthdrv_class);
iounmap(gpfcon);
iounmap(gpgcon);
return 0;
}
module_init(fifth_drv_init);
module_exit(fifth_drv_exit);
MODULE_LICENSE("GPL");
标签：进程 __user struct 字符设备驱动程序 handle nis sync head 动作
原文地址：http://www.cnblogs.com/-glb/p/7077019.html
