技术分享This is guide, howto install nVidia proprietary drivers on Fedora 25/24/23/22/21 and disable Nouveau driver. This guide works with GeForce 6/7/8/9/200/300/400/500/600/700/800/900/10 series cards.

  • GeForce 400/500/600/700/800/900/10 series cards works with 375.xx and 381.xx nVidia drivers
  • GeForce 8/9/200/300 series cards works with 340.xx nVidia drivers
  • GeForce 6/7 series cards works with 304.xx nVidia drivers

This is totally different guide than my earlier guides, like Fedora 20 nVidia driver install. This guide uses nVidia drivers directly from nVidia site and dkms to help on kernel updates. Have to say that I have had and heard strange problems with different repos (like RPMFusion) nVidia drivers. So that’s why I decided go back to old school (and bit ugly) method and install nVidia drivers “manually”. I have tested this guide with 304.xx (patched), 340.xx (patched), 375.xx and 381.xx drivers/cards.

With DKMS, you could just update your kernel and your nVidia drivers are compiled automatically. If you want upgrade nVidia drivers, then you have to download new package from nVidia site or use nvidia-installer --update option (this works only with latest drivers). If you try –update method with 304.xx or 340.xx versions, then you get latest drivers.

Table of Contents

1. Before nVidia drivers installation (Fedora 25/24/23/22/21)

2. Install nVidia proprietary drivers on Fedora 25/24/23/22/21 and disable the nouveau driver

3. Some Screenshots Using Different nVidia Cards and Drivers

4. Restore/Change/Update Plymouth After nVidia Drivers Installation (BIOS/UEFI Users)

5. Fedora 25/24/23/22/21 Uninstall nVidia drivers and Enable Nouveau

6. Fedora 25/24/23/22/21 nVidia FAQ

Let me know, if you have some problems?

Or if you succeed, you could post output of following commands:

Bash

nvidia-installer -v |grep version

uname -a

lspci |grep -i VGA

Backup first important files before you start installation. And this is of course at your own risk, because graphic cards, components and monitors are different and some combinations might cause totally unexpected results.

1. Before nVidia drivers installation

1.1 Check is your nVidia card supported

Bash

lspci |grep -E "VGA|3D"

## Example outputs ##
01:00.0 VGA compatible controller: NVIDIA Corporation GF119 [GeForce GT 610] (rev a1)

List of Supported NVIDIA GPU Products, if your card found before 340.xx section, then use 375.xx drivers and if between 340.xx and 304.xx sections, then use 340.xx drivers and if after 304.xx section, then use 304.xx drivers.

If you see multiple VGA controllers, then check next step and sometimes you might see example Intel VGA controller which have nothing to do with Optimus, normally you can go to BIOS and simply disable it.

1.2 NVIDIA Optimus Technology

If your lspci |grep -E “VGA|3D” output looks like following:

Bash

00:02.0 VGA compatible controller: Intel Corporation 2n Generation Core Processor Family Integrated Graphics Controller (rev 09)
01:00.0 VGA compatible controller: nVidia Corporation GF106 [GeForce GT 555M SDDR3] (rev a1)

Or

Bash

00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06)
01:00.0 3D controller: NVIDIA Corporation GK107M [GeForce GT 750M] (rev a1)

Or you know that your computer have NVIDIA Optimus Technology, and it is impossible to turn Intel Graphics / NVIDIA Optimus off in the BIOS then this guide might not work for you and it’s not tested. You should check Bumblebee Project.

 

2. Install nVidia proprietary drivers on Fedora 25/24/23/22/21 and disable the nouveau driver

2.1 Download nVidia Installer Package

Go to http://www.nvidia.com/Download/Find.aspx?lang=en-us and find latest version of installer package. When you use browser this is normally downloaded /home/<username>/Downloads/NVIDIA-Linux-xxxx.run location.

Tested versions:

Fedora 25Fedora 24Fedora 23Fedora 22/21
381.22 (May 9, 2017) 381.22 (May 9, 2017) 381.22 (May 9, 2017) 381.22 (May 9, 2017)
375.66 (May 4, 2017) 375.66 (May 4, 2017) 375.66 (May 4, 2017) 375.66 (May 4, 2017)
340.102 (February 14, 2017) 340.102 (February 14, 2017) 340.102 (February 14, 2017) 340.102 (February 14, 2017)
304.135 (February 14, 2017) 304.135 (February 14, 2017) 304.135 (February 14, 2017) 304.135 (February 14, 2017)

Note 340.102 users: 340.102 on Fedora 25 Kernel 4.11/4.10/4.9 needs a patched version (Download NVIDIA-Linux-x86_64-340.102 + Kernel 4.11/4.10/4.9 patch)

Note 304.135 users: 304.135 on Fedora 25/24/23 – installs and boot, but doesn’t work with Gnome 3.22/3.20/3.18. Other DEs/WMs should work normally. Kernel 4.11/4.10/4.9/4.8/4.7/4.6/4.5/4.4/4.3 needs a patched version (Download NVIDIA-Linux-x86_64-304.135 + Kernel 4.11/4.10/4.9/4.8/4.7/4.6/4.5/4.4/4.3 patch)

2.2 Make nVidia installer executable

Bash

chmod +x /path/to/NVIDIA-Linux-*.run

2.3 Change root user

Bash

su -
## OR ##
sudo -i

2.4 Make sure that you system is up-to-date and you are running latest kernel

If you have exclude=xorg-x11* row in your /etc/dnf/dnf.conf, then you can remove it now and update xorg too.

Bash

## Fedora 25/24/23/22 ##
dnf update

## Fedora 21 ##
yum update

After update reboot your system and boot using latest kernel:

Bash

reboot

2.5 Install needed dependencies

Bash

## Fedora 25/24/23/22 ##
dnf install kernel-devel kernel-headers gcc dkms acpid

## Fedora 21 ##
yum install kernel-devel kernel-headers gcc dkms acpid

2.6 Disable nouveau

2.6.1 Create or edit /etc/modprobe.d/blacklist.conf

Append ‘blacklist nouveau’

Bash

echo "blacklist nouveau" >> /etc/modprobe.d/blacklist.conf

2.6.2 Edit /etc/sysconfig/grub

Append ‘rd.driver.blacklist=nouveau’ to end of ‘GRUB_CMDLINE_LINUX=”…”‘

Bash

## Example row ##
GRUB_CMDLINE_LINUX="rd.lvm.lv=fedora/swap rd.lvm.lv=fedora/root rhgb quiet rd.driver.blacklist=nouveau"

2.6.3 Update grub2 conf

Bash

## BIOS ##
grub2-mkconfig -o /boot/grub2/grub.cfg

## UEFI ##
grub2-mkconfig -o /boot/efi/EFI/fedora/grub.cfg

2.6.4 Remove xorg-x11-drv-nouveua

Bash

## Fedora 25/24/23/22 ##
dnf remove xorg-x11-drv-nouveau

## Fedora 21 ##
yum remove xorg-x11-drv-nouveau

If you have following row on /etc/dnf/dnf.conf file, then you can remove it:

Bash

exclude=xorg-x11*

2.6.5 Generate initramfs

Bash

## Backup old initramfs nouveau image ##
mv /boot/initramfs-$(uname -r).img /boot/initramfs-$(uname -r)-nouveau.img
 
## Create new initramfs image ##
dracut /boot/initramfs-$(uname -r).img $(uname -r)

2.7 Reboot to runlevel 3

Note: You don’t have Desktop/GUI on runlevel 3. Make sure that you have some access to end of guide. (Print it, use lynx/links/w3m, save it to text file).

Bash

systemctl set-default multi-user.target

reboot
 

2.8 Install nVidia proprietary drivers for GeForce 6/7 & GeForce 8/9/200/300 & GeForce 400/500/600/700/800/900/10 series cards

2.8.1 Log in as root user

Or alternatively change root user (you shouldn’t have nouveua and xorg loaded)

Bash

su -
## OR ##
sudo -i

2.8.2 Run NVIDIA Binary

Following command executes driver install routine. Use full file name command if you have multiple binaries on same directory.

Bash

./NVIDIA-Linux-*.run

## OR full path / full file name ##

./NVIDIA-Linux-x86_64-375.66.run

/path/to/NVIDIA-Linux-x86_64-381.22.run

/path/to/NVIDIA-Linux-x86_64-340.102-patched.run

/home/<username>/Downdloads/NVIDIA-Linux-x86_64-304.135-patched.run

2.8.3 nVidia Installer Accept License

技术分享

2.8.4 nVidia Installer Register the Kernel Source Modules with DKMS

技术分享

2.8.5 nVidia Installer 32-bit Compatibility Libraries

技术分享

2.8.6 nVidia Installer Installing Drivers

技术分享

Note: Just ignore following errors:

Bash

Cannot create symlink /usr/lib/libGL.so.1 (File exists)
Cannot create symlink /usr/libGL.so (File exists)
Cannot create symlink /usr/libGLX-nvidia.so.0 (File exists)

This is bug and maybe fixed on next release. For more information check this.

2.8.7 nVidia Installer Xorg Backup

技术分享

2.8.8 nVidia Drivers Installation Complete

技术分享

2.9 All Is Done and Then Reboot Back to Runlevel 5

Bash

systemctl set-default graphical.target

reboot

2.10 VDPAU/VAAPI support

To enable video acceleration support for your player (Note: you need Geforce 8 or later).

Bash

## Fedora 25/24/23/22 ##
dnf install vdpauinfo libva-vdpau-driver libva-utils

## Fedora 21 ##
yum install vdpauinfo libva-vdpau-driver libva-utils

3. Some Screenshots Using Different Cards and Drivers

3.1 nVidia 381.22 drivers on Fedora 25 Gnome 3.22.2 with Kernel 4.11

技术分享

3.2 nVidia 375.66 drivers on Fedora 25 Gnome 3.22.2 Kernel 4.11

技术分享

3.3 nVidia 340.102 drivers on Fedora 25 Gnome 3.22.2 with Kernel 4.9.11

技术分享

3.4 nVidia 304.135 drivers on Fedora 25 LXDE with Kernel 4.9.11

技术分享

Let me know, if you have problems?

Or if you succeed, you could post output of following commands:

Bash

nvidia-installer -v |grep version

uname -a

lspci |grep -i VGA

Table of Contents

Table of Contents

1. Before nVidia drivers installation (Fedora 25/24/23/22/21)

2. Install nVidia proprietary drivers on Fedora 25/24/23/22/21 and disable the nouveau driver

3. Some Screenshots Using Different nVidia Cards and Drivers

4. Restore/Change/Update Plymouth After nVidia Drivers Installation (BIOS/UEFI Users)

5. Fedora 25/24/23/22/21 Uninstall nVidia drivers and Enable Nouveau

6. Fedora 25/24/23/22/21 nVidia FAQ