码迷,mamicode.com
首页 > 其他好文 > 详细

练习1 循环拟合与AUC

时间:2017-07-18 01:32:45      阅读:662      评论:0      收藏:0      [点我收藏+]

标签:max   cti   with   contain   xpl   eth   跳过   ogr   cut   

R需要包:mice包;AUC包或pROC包

需要知识:logistic回归;SVM;GAM;缺失值多重插补法;拟合效果ROC、AUC

 

In cancer studies, a question of critical interest is the progression of cancer. Here we consider a study on cancer progression.

The dataset contains the following variables:

Response: cancer development, which is a binary variable indicating whether there is any new cancer development;

Covariates: we have six covariates: size, stage, age, treatment type, dose I, dose II. Among them, stage and treatment type are categorical; the reminders are continuous.

Our question: in clinical practice, whether it is possible to predict cancer development using the six covariates we measure.

数据示例如下

技术分享

 

Cancer development: Yes (coded as 1) or No (coded as 0)

size: tumor size (which is measured with the diameter of tumor)

stage: tumor stage (categorial)

age: age (continuous)

treatment type: different type of treatment

Dose I: dose of drug A

Dose II: dose of drug B

".": missing measurements. You can assume MAR.

 

  • 读取数据

cancer <- read.csv("cancer-pred.csv", stringsAsFactors = FALSE)
cancer <- cancer[ , 1:7]
str(cancer)

查看数据结构,200个观测值和7个变量,并且存在缺失值。

由于数据集中缺失值由点号代替,故读取后变量为字符型,需将其转化为数值型。

无法通过设置read.csv中参数na.strings="."实现跳过转化步骤,因为最后两个变量含有小数点。

cancer <- sapply(cancer, as.numeric)     #警告信息是由于点号转化为NA值
cancer <- as.data.frame(cancer)          #转化为数据框更适用于建模
colnames(cancer) <- c("develop", "size", "stage", "age", "type",  "Dose.I", "Dose.II")
  • 探索性分析

变量箱线图、柱状图、连续变量相关图,图片仅展示柱状图

old.par <- par(mfrow=c(3, 3))
apply(cancer, 2, boxplot)             
par(old.par)

par(mfrow=c(3, 3), mar=c(4, 4, 2, 0.5))
for (j in 1:ncol(cancer)) {
  hist(cancer[ , j], xlab=colnames(cancer)[j],
       main=paste("Histogram of", colnames(cancer)[j]),
       col="lightblue", breaks=20)
}
par(mfrow=c(1, 1))

pairs(~size+age+Dose.I+Dose.II, data=cancer)

技术分享

  •  补全缺失值

对于缺失值的处理方法有几种,参考《R语言实战》

此处处理方法有三种:删除缺失值,平均值众数替代法,多重插补法。

# #缺失值删除法
# cancer <- na.omit(cancer)
# #平均数众数替代法
# cancer.mean <- sapply(cancer[c(2, 4, 6, 7)], mean, na.rm=TRUE)
# cancer.table <- sapply(cancer[ , c(1, 3, 5)], table)
# cancer[which(is.na(cancer[ , 2])), 2] <- round(cancer.mean[1], 3)
# cancer[which(is.na(cancer[ , 4])), 4] <- round(cancer.mean[2], 1)
# cancer[which(is.na(cancer[ , 6])), 6] <- round(cancer.mean[3], 3)
# cancer[which(is.na(cancer[ , 7])), 7] <- round(cancer.mean[4], 3)
# for(i in c(1, 3, 5)){
#   cancer[which(is.na(cancer[ , i])), i] <- 
#     as.numeric(rownames(cancer.table)[which.max(cancer.table[1])])
# }
# #多重插补法
imp <- mice(cancer, seed=1)
fit <- with(imp,glm(develop~., family=binomial, data = cancer))
pooled <- pool(fit)
cancer <- complete(imp,action=3)

cancer[ , c(3, 5)] <- sapply(cancer[ , c(3, 5)], as.factor)   #部分变量转化为因子
  • 抽样拟合计算AUC

1. logistic回归

将数据分为训练集(150个样本)和测试集(50个样本),用训练集拟合logistic模型,用得到的模型对测试集的因变量进行预测

将预测值与真实值比较得到错判矩阵、tpr、fpr,针对不同的cutoffs得到roc曲线并计算AUC值。

将以上步骤循环3000次处理,对3000个AUC取平均并进行t检验。

cancer.auc <- c(length=3000)    #生成空向量以填充
for (i in 1:3000){
  set.seed(i)
  sample.i <- sample(1:nrow(cancer), 3/4*nrow(cancer))
  cancer1  <- cancer[sample.i, ]; cancer2 <- cancer[-sample.i, ]
  glm.can  <- glm(develop~., data=cancer1)
# glm.new  <- step(glm.can, trace=0)   #trace=0不返回结果
  cancer.pred   <- predict(glm.can, family=binomial, 
                           newdata = cancer2, type = "response")
  cancer.roc    <- roc(cancer.pred, as.factor(cancer2$develop))
  cancer.auc[i] <- auc(cancer.roc)
}

mean(cancer.auc)            #3000次AUC均值
t.test(cancer.auc, alternative = "greater", mu=0.5)

hist(cancer.auc, freq = F, breaks = 40) 
lines(density(cancer.auc, bw=0.05), col="red", lwd=2)

  技术分享

 

 技术分享

因变量为是否型,虽然t检验通过,但是预测效果并不好

 

2. 支持向量机(SVM)

下面使用支持向量机的方法

#SVM
cancer.auc <- c(length=3000)
for (i in 1:3000){
  set.seed(i)
  sample.i <- sample(1:nrow(cancer), 3/4*nrow(cancer))
  cancer1  <- cancer[sample.i, ]; cancer2 <- cancer[-sample.i, ]
  cancer.svm <- svm(develop~., data=cancer1kernel= "linear")
  cancer.pred   <- predict(cancer.svm, newdata = cancer2, 
                           type="response")
  cancer.roc    <- roc(cancer.pred, as.factor(cancer2$develop))
  cancer.auc[i] <- auc(cancer.roc)
}
mean(cancer.auc)
t.test(cancer.auc, alternative = "greater", mu=0.5)

尝试SVM四种核方法,即kernel参数“linear”、“polynomial”、“radial”、“sigmoid”

最后线性方法得到AUC均值最大,但也只有0.5837262,与logistic模型相比并不具有显著优势

 

3. 广义加性模型(GAM)

#GAM
cancer.auc <- c(length=300)
for (i in 1:300){
  set.seed(10*i)
  # set.seed(3)
  sample.i <- sample(1:nrow(cancer), 3/4*nrow(cancer))
  cancer1  <- cancer[sample.i, ]; cancer2 <- cancer[-sample.i, ]
  cancer.gam <- gam(develop ~ s(size, bs="cr") + stage + 
                      s(age, bs="cr") + type + s(Dose.I, bs="cr") +
                      s(Dose.II, bs="cr"), family = binomial, 
                    data=cancer1, trace=TRUE)
  cancer.pred   <- predict(cancer.gam, newdata = cancer2, 
                           type="response")
  cancer.roc    <- roc(cancer.pred, as.factor(cancer2$develop))
  # auc(cancer.roc)
  cancer.auc[i] <- auc(cancer.roc)
}
mean(cancer.auc)
t.test(cancer.auc, alternative = "greater", mu=0.5)

  GAM函数得到300次AUC均值为0.5694343,且GAM循环3000次较GLM运算速度相比很慢

 

 

Tips:

问题一:随机抽样,以下得到的试验集与测试集不是互补关系,会导致AUC上升。

   set.seed(1)

   cancer1  <-  cancer[sample(1:nrow(cancer),  3/4*nrow(cancer)),  ]

   cancer2  <-  cancer[-sample(1:nrow(cancer),  3/4*nrow(cancer)),  ]

问题二:三种处理缺失值方法(缺失值剔除法、均值众数替代法、多重插补法)结果相差不大,差距在0.01左右。

问题三:DoseII数据出现小于0的值如果当作异常值处理删去结果为0.5770816,不处理结果为0.5873808,AUC降低了0.01,故放弃。

问题四:循环中使用step函数筛选不显著变量,AUC降低0.3左右,故放弃。

问题五:计算AUC值有两个包“AUC”和“pROC”,两个包roc函数参数输入方式不同。设立了随机数种子,但是二者得到结果测试集差0.01,试验集到小数点后20位才不一致,未确定是用AUC计算方式不同解释还是测试集出现问题解释。

 

若需原始数据试验可回复联系

练习1 循环拟合与AUC

标签:max   cti   with   contain   xpl   eth   跳过   ogr   cut   

原文地址:http://www.cnblogs.com/lj0019/p/7197498.html

(0)
(0)
   
举报
评论 一句话评论(0
登录后才能评论!
© 2014 mamicode.com 版权所有  联系我们:gaon5@hotmail.com
迷上了代码!