码迷，mamicode.com
首页 > 其他好文 > 详细

ERP合同管理（二十六）

时间：2017-07-20 23:58:25      阅读：462      评论：0      收藏：0      [点我收藏+]

标签：upd   component   dtd   roc   业务流程   else   proc   w3c   back   

需要实现的基本业务：

技术分享

相关的用例图：

技术分享

相关业务的封装：

技术分享

相关的约定：

技术分享

合同信息添加业务流程：

技术分享

添加的存储过程

SET QUOTED_IDENTIFIER ON
SET ANSI_NULLS ON
GO



------------------------------------
--用途：增加一条记录 
--项目名称：
--说明：
--时间：2011/11/11 22:07:38
------------------------------------
CREATE PROCEDURE [dbo].[BioCRMContract_ADD]
@ContractID int output,
@ContractName nvarchar(200),
@CustomerID int,
@CreateTime datetime,
@ContractSum money,
@SignTime datetime,
@EffectiveTime datetime,
@EndTime datetime,
@ContractType nvarchar(100),
@UserID int,
@ExecutiveState nvarchar(50),
@ContractDesc nvarchar(4000)


 AS 
	INSERT INTO [BioCRMContract](
	[ContractName],[CustomerID],[CreateTime],[ContractSum],[SignTime],[EffectiveTime],[EndTime],[ContractType],[UserID],[ExecutiveState],[ContractDesc]
	)VALUES(
	@ContractName,@CustomerID,@CreateTime,@ContractSum,@SignTime,@EffectiveTime,@EndTime,@ContractType,@UserID,@ExecutiveState,@ContractDesc
	)
	SET @ContractID = @@IDENTITY

 添加的业务：

  /// <summary>
      /// 添加一条合同信息对象并返回当前合同编号
      /// </summary>
        /// <param name="mode">BioCRMContract</param>
      /// <returns>int</returns>
      public int BioCRMContractadd(BioCRMContract model)
      {
         SqlParameter[] parameters = {
					new SqlParameter("@ContractID", SqlDbType.Int,4),
					new SqlParameter("@ContractName", SqlDbType.NVarChar,200),
					new SqlParameter("@ContractNumber", SqlDbType.NVarChar,100),
					new SqlParameter("@CustomerID", SqlDbType.Int,4),
					new SqlParameter("@CreateTime", SqlDbType.DateTime),
					new SqlParameter("@ContractSum", SqlDbType.Money,8),
					new SqlParameter("@SignTime", SqlDbType.DateTime),
					new SqlParameter("@EffectiveTime", SqlDbType.DateTime),
					new SqlParameter("@EndTime", SqlDbType.DateTime),
					new SqlParameter("@ContractType", SqlDbType.NVarChar,100),
					new SqlParameter("@UserID", SqlDbType.Int,4),
					new SqlParameter("@ExecutiveState", SqlDbType.NVarChar,50),
					new SqlParameter("@ContractDesc", SqlDbType.NVarChar,4000),
					new SqlParameter("@AssessorID", SqlDbType.Int,4)
					};
          parameters[0].Direction = ParameterDirection.Output;
          parameters[1].Value = model.ContractName;
          parameters[2].Value = model.ContractNumber;
          parameters[3].Value = model.CustomerID;
          parameters[4].Value = model.CreateTime;
          parameters[5].Value = model.ContractSum;
          parameters[6].Value = model.SignTime;
          parameters[7].Value = model.EffectiveTime;
          parameters[8].Value = model.EndTime;
          parameters[9].Value = model.ContractType;
          parameters[10].Value = model.UserID;
          parameters[11].Value = model.ExecutiveState;
          parameters[12].Value = model.ContractDesc;
          parameters[13].Value = model.AssessorID;
         

         int count= DataBaseHelper.ExcuteSqlReturnInt("BioCRMContract_ADD", CommandType.StoredProcedure, parameters);
         if (count != 0)
         {
             return int.Parse(parameters[0].Value.ToString());
         }
         else
         {
             return 0;
         }
      }

 修改的存储过程：

CREATE PROCEDURE [dbo].[BioCRMContract_Update]
@ContractID int,
@ContractName nvarchar(200),
@CustomerID int,
@CreateTime datetime,
@ContractSum money,
@SignTime datetime,
@EffectiveTime datetime,
@EndTime datetime,
@ContractType nvarchar(100),
@UserID int,
@ExecutiveState nvarchar(50),
@ContractDesc nvarchar(4000),
@AssessorAuditing bit,
@DeleteState bit
 AS 
	UPDATE [BioCRMContract] SET 
	[ContractName] = @ContractName,[CustomerID] = @CustomerID,[CreateTime] = @CreateTime,[ContractSum] = @ContractSum,[SignTime] = @SignTime,[EffectiveTime] = @EffectiveTime,[EndTime] = @EndTime,[ContractType] = @ContractType,[UserID] = @UserID,[ExecutiveState] = @ExecutiveState,[ContractDesc] = @ContractDesc,AssessorAuditing = @AssessorAuditing,[DeleteState] = @DeleteState
	WHERE ContractID=@ContractID

 业务逻辑的代码：

 /// <summary>
      /// 修改一条合同信息对象
      /// </summary>
      /// <param name="mode">BioCRMContract</param>
      /// <returns>int</returns>
      public int BioCRMContractaUpdate(BioCRMContract model)
      {
          SqlParameter[] parameters = {
					new SqlParameter("@ContractID", SqlDbType.Int,4),
					new SqlParameter("@ContractName", SqlDbType.NVarChar,200),
					new SqlParameter("@ContractNumber", SqlDbType.NVarChar,100),
					new SqlParameter("@CustomerID", SqlDbType.Int,4),
					new SqlParameter("@CreateTime", SqlDbType.DateTime),
					new SqlParameter("@ContractSum", SqlDbType.Money,8),
					new SqlParameter("@SignTime", SqlDbType.DateTime),
					new SqlParameter("@EffectiveTime", SqlDbType.DateTime),
					new SqlParameter("@EndTime", SqlDbType.DateTime),
					new SqlParameter("@ContractType", SqlDbType.NVarChar,100),
					new SqlParameter("@UserID", SqlDbType.Int,4),
					new SqlParameter("@ExecutiveState", SqlDbType.NVarChar,50),
					new SqlParameter("@ContractDesc", SqlDbType.NVarChar,4000),
					new SqlParameter("@AssessorID", SqlDbType.Int,4),
					new SqlParameter("@DeleteState", SqlDbType.Bit,1)};
          parameters[0].Value =model.ContractID;
          parameters[1].Value = model.ContractName;
          parameters[2].Value = model.ContractNumber;
          parameters[3].Value = model.CustomerID;
          parameters[4].Value = model.CreateTime;
          parameters[5].Value = model.ContractSum;
          parameters[6].Value = model.SignTime;
          parameters[7].Value = model.EffectiveTime;
          parameters[8].Value = model.EndTime;
          parameters[9].Value = model.ContractType;
          parameters[10].Value = model.UserID;
          parameters[11].Value = model.ExecutiveState;
          parameters[12].Value = model.ContractDesc;
          parameters[13].Value = model.AssessorID;
          parameters[14].Value = model.DeleteState;

          int count = DataBaseHelper.ExcuteSqlReturnInt("BioCRMContract_Update", CommandType.StoredProcedure, parameters);
          if (count != 0)
          {
              return int.Parse(parameters[0].Value.ToString());
          }
          else
          {
              return 0;
          }
      }

 合同对象添加的存储过程：

CREATE PROCEDURE [dbo].[BioErpCRMContractDocument_ADD]
@DocumentID int,
@ContractID int
 AS 
	INSERT INTO [BioErpCRMContractDocument](
	[DocumentID],[ContractID]
	)VALUES(
	@DocumentID,@ContractID
	)

 添加的代码:

       /// <summary>
      /// 合同文档对象添加
      /// </summary>
      /// <param name="document">CRMContractDocument</param>
      /// <returns>int</returns>
      public int CRMContractDocumentADD(CRMContractDocument document)
      {
          SqlParameter[] parameters = {					
					new SqlParameter("@DocumentID", SqlDbType.Int,4),
					new SqlParameter("@ContractID", SqlDbType.Int,4)
					};
       
          parameters[0].Value = document.DocumentID;
          parameters[1].Value = document.ContractID;
          return DataBaseHelper.ExcuteSqlReturnInt("BioErpCRMContractDocument_ADD", CommandType.StoredProcedure, parameters);
      }

文档修改的记录：

CREATE PROCEDURE BioErpCRMContractDocument_Update
@AccessoryID int,
@DocumentID int,
@ContractID int,
@DeleteState bit
 AS 
	UPDATE [BioErpCRMContractDocument] SET 
	[DocumentID] = @DocumentID,[ContractID] = @ContractID,[DeleteState] = @DeleteState
	WHERE AccessoryID=@AccessoryID

 业务逻辑：

   /// <summary>
      /// 合同文档对象修改
      /// </summary>
      /// <param name="document">CRMContractDocument</param>
      /// <returns>int</returns>
      public int CRMContractDocumentUpdate(CRMContractDocument model)
      {
          SqlParameter[] parameters = {
					new SqlParameter("@AccessoryID", SqlDbType.Int,4),
					new SqlParameter("@DocumentID", SqlDbType.Int,4),
					new SqlParameter("@ContractID", SqlDbType.Int,4),
					new SqlParameter("@DeleteState", SqlDbType.Bit,1)};
          parameters[0].Value = model.AccessoryID;
          parameters[1].Value = model.DocumentID;
          parameters[2].Value = model.ContractID;
          parameters[3].Value = model.DeleteState;
          return DataBaseHelper.ExcuteSqlReturnInt("BioErpCRMContractDocument_Update", CommandType.StoredProcedure, parameters);
      }

 任务流程表中添加的存储过程：

CREATE PROCEDURE TaskListRecord_ADD
@Subject nvarchar(100),
@TaskID int,
@TaskTableID int,
@Transmitter int,
@Accepter int,
@Pass int,
@AuditingSate int,
@Mind nvarchar(500),
@FirstSumitTime datetime,
@FirstTransmitter int,
@FirstAccepter int,
@DepartMentId int,
@SumitTime datetime

 AS 
	INSERT INTO [TaskListRecord](
	[Subject],[TaskID],[TaskTableID],[Transmitter],[Accepter],[Pass],[AuditingSate],[Mind],[FirstSumitTime],[FirstTransmitter],[FirstAccepter],[DepartMentId],[SumitTime]
	)VALUES(
	@Subject,@TaskID,@TaskTableID,@Transmitter,@Accepter,@Pass,@AuditingSate,@Mind,@FirstSumitTime,@FirstTransmitter,@FirstAccepter,@DepartMentId,@SumitTime
	)

 写在共用类中的业务：

 /// <summary>
        /// 向任务流程表添加一条记录
        /// </summary>
        /// <param name="record">TaskListRecord</param>
        /// <returns>int</returns>
        public int TaskListRecordAdd(TaskListRecord model)
        {
            SqlParameter[] parameters = {
					new SqlParameter("@Subject", SqlDbType.NVarChar,100),
					new SqlParameter("@TaskID", SqlDbType.Int,4),
					new SqlParameter("@TaskTableID", SqlDbType.Int,4),
					new SqlParameter("@Transmitter", SqlDbType.Int,4),
					new SqlParameter("@Accepter", SqlDbType.Int,4),
					new SqlParameter("@Pass", SqlDbType.Int,4),
					new SqlParameter("@AuditingSate", SqlDbType.Int,4),
					new SqlParameter("@Mind", SqlDbType.NVarChar,500),
					new SqlParameter("@FirstSumitTime", SqlDbType.DateTime),
					new SqlParameter("@FirstTransmitter", SqlDbType.Int,4),
					new SqlParameter("@FirstAccepter", SqlDbType.Int,4),
					new SqlParameter("@DepartMentId", SqlDbType.Int,4),
					new SqlParameter("@SumitTime", SqlDbType.DateTime)};
         
            parameters[0].Value = model.Subject;
            parameters[1].Value = model.TaskID;
            parameters[2].Value = model.TaskTableID;
            parameters[3].Value = model.Transmitter;
            parameters[4].Value = model.Accepter;
            parameters[5].Value = model.Pass;
            parameters[6].Value = model.AuditingSate;
            parameters[7].Value = model.Mind;
            parameters[8].Value = model.FirstSumitTime;
            parameters[9].Value = model.FirstTransmitter;
            parameters[10].Value = model.FirstAccepter;
            parameters[11].Value = model.DepartMentId;
            parameters[12].Value = model.SumitTime;

            return DataBaseHelper.ExcuteSqlReturnInt("TaskListRecord_ADD", CommandType.StoredProcedure, parameters);

        }

 前端页面用到的CSS样式：

.Inupttable{ width:100%; border:solid 1px; border-collapse:collapse; }
.Inupttable td{ border:solid 1px ;  height:30px;}
.Inupttable input{ width:80px; border:none; border-bottom:solid #000 1px;  background-color:transparent;}
.Inupttable textarea{border:none; border-bottom:solid #000 1px;  background-color:transparent;}
.Inupttable select{border:none; border-bottom:solid #000 1px;  background-color:#eee;}
.Inupttable option{ background-color:#eee;}
.Inupttable .btnchoose{background-color:#FFAA00; width:50px;}

 部门下拉的列表：

<%@ Page Language="C#" AutoEventWireup="true" CodeBehind="DepartMentListSelect.aspx.cs" Inherits="BioErpWeb.PersonList.DepartMentListSelect" %>

<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">

<html xmlns="http://www.w3.org/1999/xhtml">
<head runat="server">
    <title></title>
    
</head>
<body>
    <form id="form1" runat="server">
    <div>
    <select multiple="multiple" id="sltUserList" style=" width:80px; height:270px; margin:0px;">
     <%=this.GetUserList%>
    </select>
    </div>
    </form>
</body>
</html>

显示的后台：

   public string GetUserList
        {
            get {
                string strHtml = "";
                if (Request.QueryString["DepartmentName"] == null)
                {
                    DataSet ds = SqlComm.GetDataByCondition("Department", "top 10 DepartmentId,DepartmentName", " 1=1 order by DisplayOrder");
                    foreach (DataRow dr in ds.Tables[0].Rows)
                    {
                        strHtml += "<option value=‘" + dr["DepartmentId"] + "‘>" + dr["DepartmentName"] + "</option>";
                    }

                }
                else
                {
                    DataSet ds = SqlComm.GetDataByCondition("Department", "top 10  DepartmentId,DepartmentName", " DepartmentName like ‘" + Request.QueryString["DepartmentName"].ToString() + "%‘ order by DisplayOrder");
                    foreach (DataRow dr in ds.Tables[0].Rows)
                    {
                        strHtml += "<option value=‘" + dr["DepartmentId"] + "‘>" + dr["DepartmentName"] + "</option>";
                    }
                }

                return strHtml;
            }
        }

部门显示的前端：

<%@ Page Language="C#" AutoEventWireup="true" CodeBehind="DepartMentList.aspx.cs" Inherits="BioErpWeb.PersonList.DepartMentList" %>

<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">

<html xmlns="http://www.w3.org/1999/xhtml">
<head runat="server">
    <title></title>
    <script type="text/javascript">
        function search() {
            if (document.getElementById("txtSearchName").value == "") {
                alert("请输入员工姓名");
                return;
            }
            document.getElementById("PersonIframeList").src = "DepartMentListSelect.aspx?DepartmentName=" + encodeURIComponent(document.getElementById("txtSearchName").value);

        }
        
        function choose() {
            window.returnValue = PersonIframeList.document.getElementById("sltUserList").value;
            window.close();
        }
    </script>
    <style type="text/css">
        .style1
        {
            width: 157px;
        }
    </style>
</head>
<body>
    <form id="form1" runat="server">
    <div>
     <table style=" width:310px; ">
         <tr>
             <td class="style1">部门名称
             </td>
             <td>
                <input id="txtSearchName" name="txtSearchName" type="text" size="10"  maxlength="10"/> <input type="button" value="查询" onclick="search()" />
             </td>
         </tr>
         <tr>
             <td class="style1">
             <iframe width="120px" id="PersonIframeList" frameborder=0 src="DepartMentListSelect.aspx" height="310px" >
             
             </iframe>
             </td>
             <td style=" vertical-align:bottom; padding-bottom:20px;">
             <input type="button"  value="选择" onclick="choose()"/>
             </td>
         </tr>
     </table>
    </div>
    </form>
</body>
</html>

 客户选择的js：

//客户选择对话框 
function showCustomerDialog3() {
    var re = showModalDialog("../../PersonList/CustomerList.aspx", "", "dialogWidth=320px;dialogHeight=350px");
    var obj = window.event.srcElement;
    var td = obj.parentNode;
    var txts = td.getElementsByTagName(‘input‘);
    if (re == null || re == "") {

        if (txts[0].value == "" || txts[0].value == null) {
            txts[0].value = "请选择";
        }
    }
    else {
        txts[0].value = re;
    }
}

 

ERP合同管理（二十六）

标签：upd   component   dtd   roc   业务流程   else   proc   w3c   back   

原文地址：http://www.cnblogs.com/sunliyuan/p/7215206.html
踩
(0)
赞
(0)
   
举报
评论 一句话评论（0）
登录后才能评论！
分享档案
更多>
2021年07月29日 (22)
2021年07月28日 (40)
2021年07月27日 (32)
2021年07月26日 (79)
2021年07月23日 (29)
2021年07月22日 (30)
2021年07月21日 (42)
2021年07月20日 (16)
2021年07月19日 (90)
2021年07月16日 (35)
周排行
mamicode.com排行更多图片
更多
友情链接
兰亭集智   国之画   百度统计   站长统计   阿里云   chrome插件   新版天听网
关于我们 - 联系我们 - 留言反馈
© 2014 mamicode.com 版权所有  联系我们:gaon5@hotmail.com
迷上了代码！