标签：x86 account project cto pac lock single des contain
centos7貌似预装了svn服务（有待确认），因此我们直接启动该服务即可
一、svn服务端配置（服务器IP假设为192.168.100.1）
步骤1：创建存放代码库目录
mkdir -p /var/svn
步骤2：启动svn服务
svnserve -d -r /var/svn
步骤3：创建代码库something
[root@model ~]# cd /var/svn [root@model svn]# [root@model svn]# [root@model svn]# svnadmin create something [root@model svn]# [root@model svn]# [root@model svn]# cd something [root@model something]# [root@model something]# [root@model something]# ls conf db format hooks locks README.txt [root@model something]# [root@model something]# [root@model something]# cd conf [root@model conf]# [root@model conf]# [root@model conf]# ls authz passwd svnserve.conf [root@model conf]# [root@model conf]#
步骤4：配置svnserve.conf文件
[root@model conf]# [root@model conf]# vi svnserve.conf ### This file controls the configuration of the svnserve daemon, if you ### use it to allow access to this repository. (If you only allow ### access through http: and/or file: URLs, then this file is ### irrelevant.) ### Visit http://subversion.apache.org/ for more information. [general] ### The anon-access and auth-access options control access to the ### repository for unauthenticated (a.k.a. anonymous) users and ### authenticated users, respectively. ### Valid values are "write", "read", and "none". ### Setting the value to "none" prohibits both reading and writing; ### "read" allows read-only access, and "write" allows complete ### read/write access to the repository. ### The sample settings below are the defaults and specify that anonymous ### users have read-only access to the repository, while authenticated ### users have read and write access to the repository. # anon-access = read # auth-access = write anon-access = none auth-access = write ### The password-db option controls the location of the password ### database file. Unless you specify a path starting with a /, ### the file‘s location is relative to the directory containing ### this configuration file. ### If SASL is enabled (see below), this file will NOT be used. ### Uncomment the line below to use the default password file. # password-db = passwd password-db = passwd ### The authz-db option controls the location of the authorization ### rules for path-based access control. Unless you specify a path ### starting with a /, the file‘s location is relative to the the ### directory containing this file. If you don‘t specify an ### authz-db, no path-based access control is done. ### Uncomment the line below to use the default authorization file. # authz-db = authz authz-db = authz ### This option specifies the authentication realm of the repository. ### If two repositories have the same authentication realm, they should ### have the same password database, and vice versa. The default realm ### is repository‘s uuid. # realm = My First Repository
#此选项指定的库的认证领域
raalm = /var/svn/something
### The force-username-case option causes svnserve to case-normalize ### usernames before comparing them against the authorization rules in the ### authz-db file configured above. Valid values are "upper" (to upper- ### case the usernames), "lower" (to lowercase the usernames), and ### "none" (to compare usernames as-is without case conversion, which ### is the default behavior). # force-username-case = none [sasl] ### This option specifies whether you want to use the Cyrus SASL ### library for authentication. Default is false. ### This section will be ignored if svnserve is not built with Cyrus ### SASL support; to check, run ‘svnserve --version‘ and look for a line ### reading ‘Cyrus SASL authentication is available.‘ # use-sasl = true ### These options specify the desired strength of the security layer ### that you want SASL to provide. 0 means no encryption, 1 means ### integrity-checking only, values larger than 1 are correlated "svnserve.conf" 71L, 3173C written
步骤5：配置passwd文件
[root@model conf]# vi passwd ### This file is an example password file for svnserve. ### Its format is similar to that of svnserve.conf. As shown in the ### example below it contains one section labelled [users]. ### The name and password for each user follow, one account per line. [users] # harry = harryssecret # sally = sallyssecret user = 123456 ~ ~ "passwd" 11L, 326C written
步骤6：配置authz文件
[root@model conf]# [root@model conf]# vi authz ### This file is an example authorization file for svnserve. ### Its format is identical to that of mod_authz_svn authorization ### files. ### As shown below each section defines authorizations for the path and ### (optional) repository specified by the section name. ### The authorizations follow. An authorization line can refer to: ### - a single user, ### - a group of users defined in a special [groups] section, ### - an alias defined in a special [aliases] section, ### - all authenticated users, using the ‘$authenticated‘ token, ### - only anonymous users, using the ‘$anonymous‘ token, ### - anyone, using the ‘*‘ wildcard. ### ### A match can be inverted by prefixing the rule with ‘~‘. Rules can ### grant read (‘r‘) access, read-write (‘rw‘) access, or no access ### (‘‘). [aliases] # joe = /C=XZ/ST=Dessert/L=Snake City/O=Snake Oil, Ltd./OU=Research Institute/CN=Joe Average [groups] # harry_and_sally = harry,sally # harry_sally_and_joe = harry,sally,&joe
admin = user
# [/foo/bar] # harry = rw # &joe = r # * =
[/]
user = rw
# [repository:/baz/fuz] # @harry_and_sally = rw # * = r
[something:/]
@admin = rw
~ ~ ~ ~ ~ ~ "authz" 35L, 1093C written
此处的意思是用户usr_0对目录[/]（代码库something的根目录）下的所有文件，具有读（r）和写（w）的权限
步骤7：关闭防火墙及防火墙开机自启动
systemctl stop firewalld.service
systemctl disable firewalld.service
至此，svn服务端配置完毕
二、svn客户端配置（客户端IP假设为192.168.100.2）
步骤1：关闭防火墙
[root@localhost svn]# [root@localhost svn]# systemctl stop firewalld.service [root@localhost svn]# [root@localhost svn]# systemctl disable firewalld.service Removed symlink /etc/systemd/system/dbus-org.fedoraproject.FirewallD1.service. Removed symlink /etc/systemd/system/basic.target.wants/firewalld.service. [root@localhost svn]#
步骤2：创建客户端svn上提取文件存放目录
[root@localhost /]# [root@localhost /]# mkdir /svn [root@localhost /]# [root@localhost /]#
步骤3：登录svn服务器并检出something库中的文件
[root@localhost svn]# [root@localhost svn]# [root@localhost svn]# svn co --username user --password 123456 svn://192.168.100.1/something ----------------------------------------------------------------------- 注意! 你的密码，对于认证域: <svn://192.168.100.1:3690> /var/svn/something 只能明文保存在磁盘上! 如果可能的话，请考虑配置你的系统，让 Subversion 可以保存加密后的密码。请参阅文档以获得详细信息。 你可以通过在“/root/.subversion/servers”中设置选项“store-plaintext-passwords”为“yes”或“no”， 来避免再次出现此警告。 ----------------------------------------------------------------------- 保存未加密的密码(yes/no)?n A something/package A something/package/apache-maven-3.5.0-bin.tar.gz A something/package/mysql-5.6.37-linux-glibc2.12-x86_64.tar.gz A something/package/jdk-8u141-linux-x64.gz A something/package/apache-tomcat-7.0.79.tar.gz 取出版本 6。 [root@localhost svn]# [root@localhost svn]# ls something [root@localhost svn]# [root@localhost svn]#
更新svn版本库
[root@localhost package]# [root@localhost package]# [root@localhost package]# svn up /svn/something 正在升级 ‘/svn/something‘: 认证领域: <svn://192.168.100.1:3690> /var/svn/something “user”的密码: ----------------------------------------------------------------------- 注意! 你的密码，对于认证域: <svn://192.168.100.1:3690> /var/svn/something 只能明文保存在磁盘上! 如果可能的话，请考虑配置你的系统，让 Subversion 可以保存加密后的密码。请参阅文档以获得详细信息。 你可以通过在“/root/.subversion/servers”中设置选项“store-plaintext-passwords”为“yes”或“no”， 来避免再次出现此警告。 ----------------------------------------------------------------------- 保存未加密的密码(yes/no)?n D jenkins.war 更新到版本 7。 [root@localhost package]# [root@localhost package]# [root@localhost package]#
标签：x86 account project cto pac lock single des contain
原文地址：http://www.cnblogs.com/simple-man/p/7259160.html
