标签：out tween erro ini gis middle mil 线程池 rds
由于tomcat6的配置文件如下：
<Connector port="80" protocol="org.apache.coyote.http11.Http11NioProtocol" connectionTimeout="20000" URIEncoding="UTF-8" useBodyEncodingForURI="true" enableLookups="false" redirectPort="8443" />
所以在StandardService类中执行如下代码启动Connector时，其中的connector为Http11NioProtocol实现类。
synchronized (connectors) {
for (int i = 0; i < connectors.length; i++) {
try {
((Lifecycle) connectors[i]).start();
} catch (Exception e) {
log.error(sm.getString("standardService.connector.startFailed",connectors[i]), e);
}
}
}
Connector类中调用org.apache.coyote.http11.Http11NioProtocol的start()方法。在Http11NioProtocol类中又调用了org.apache.tomcat.util.net.NioEndpoint的start()方法。
public void start()throws Exception {
// Initialize socket if not done before
if (!initialized) {
init();
}
if (!running) {
running = true;
paused = false;
// Create worker collection
if (getUseExecutor()) {
if ( executor == null ) {
TaskQueue taskqueue = new TaskQueue();
TaskThreadFactory tf = new TaskThreadFactory(getName() + "-exec-",this);
/*
corePoolSize the number of threads to keep in the pool, even if they are idle, unless allowCoreThreadTimeOut is set
maximumPoolSize the maximum number of threads to allow in the pool
keepAliveTime when the number of threads is greater than the core, this is the maximum time that excess idle threads will wait for new tasks before terminating.
unit the time unit for the keepAliveTime argument
workQueue the queue to use for holding tasks before they are executed. This queue will hold only the Runnable tasks submitted by the execute method.
threadFactory the factory to use when the executor creates a new thread
*/
executor = new ThreadPoolExecutor(
getMinSpareThreads(),
getMaxThreads(),
60,
TimeUnit.SECONDS,
taskqueue,
tf);
taskqueue.setParent( (ThreadPoolExecutor) executor, this);
}
} else if ( executor == null ) {//avoid two thread pools being created
workers = new WorkerStack(maxThreads,this);
}
// Poller线程，由于Acceptor委托线程为客户端Socket注册了READ事件，当READ准备好时，就会进入Poller线程的循环，Poller线程也是委托线程池去做，
// 线程池将NioChannel加入到ConcurrentLinkedQueue<NioChannel>队列中。该线程数目可配置，默认为1个
// Start poller threads
pollers = new Poller[getPollerThreadCount()];
for (int i=0; i<pollers.length; i++) {
pollers[i] = new Poller(this);
Thread pollerThread = new Thread(pollers[i], getName() + "-ClientPoller-"+i);
pollerThread.setPriority(threadPriority);
pollerThread.setDaemon(true);
pollerThread.start();
}
// Start acceptor threads
for (int i = 0; i < acceptorThreadCount; i++) {
Thread acceptorThread = new Thread(new Acceptor(this), getName() + "-Acceptor-" + i);
acceptorThread.setPriority(threadPriority);
acceptorThread.setDaemon(daemon);
acceptorThread.start();
}
}
}
默认情况下会启动一个Acceptor线程与4个Poller线程。
注意：本作者为了方便代码的阅读，将NioEndpoint类重新进行了整理，也就是为NioEndpoint中的所有内部类都新建为了public类。由于内部类需要用到NioEndpoint的一些变量，所以在new一个public为在的时候需要为这个类传递this，也就是当前的NioEndpoint对象。
看一下Acceptor线程的run()方法是怎么运行接收请求的。
// Accept the next incoming connection from the server socket
SocketChannel socket = endpoint.serverSock.accept(); // this is clientSocket
// Hand this socket off to an appropriate processor
//TODO FIXME - this is currently a blocking call, meaning we will be blocking
//further accepts until there is a thread available.
if ( endpoint.running && (!endpoint.paused) && socket != null ) {
//processSocket(socket);
if (!endpoint.setSocketOptions(socket)) {
try {
socket.socket().close();
socket.close();
} catch (IOException ix) {
// if (log.isDebugEnabled())
// log.debug("", ix);
}
}
}
这个线程主要调用了setSocketOptions()方法，源代码如下：
public boolean setSocketOptions(SocketChannel socket) {
// Process the connection
try {
//disable blocking, APR style, we are gonna be polling it
socket.configureBlocking(false);
Socket sock = socket.socket();
socketProperties.setProperties(sock);
NioChannel channel = nioChannels.poll();
if ( channel == null ) {
// SSL setup
if (sslContext != null) {
SSLEngine engine = createSSLEngine();
int appbufsize = engine.getSession().getApplicationBufferSize();
NioBufferHandler bufhandler = new NioBufferHandler(Math.max(appbufsize,socketProperties.getAppReadBufSize()),
Math.max(appbufsize,socketProperties.getAppWriteBufSize()),
socketProperties.getDirectBuffer());
channel = new SecureNioChannel(socket, engine, bufhandler, selectorPool);
} else {
// normal tcp setup
NioBufferHandler bufhandler = new NioBufferHandler(socketProperties.getAppReadBufSize(),
socketProperties.getAppWriteBufSize(),
socketProperties.getDirectBuffer());
channel = new NioChannel(socket, bufhandler);
}
} else {
channel.setIOChannel(socket);
if ( channel instanceof SecureNioChannel ) {
SSLEngine engine = createSSLEngine();
((SecureNioChannel)channel).reset(engine);
} else {
channel.reset();
}
}
getPoller0().register(channel); // 初始化为4个Poller
} catch (Throwable t) {
try {
log.error("",t);
}catch ( Throwable tt){}
// Tell to close the socket
return false;
}
return true;
}
getPoller0()方法通过循环均匀获取channel来register各个channel。看下一Poller线程的register()方法：
public void register(final NioChannel socket) {
socket.setPoller(this);
KeyAttachment key = endpoint.keyCache.poll();
final KeyAttachment ka = key != null ? key : new KeyAttachment();
ka.reset(this, socket, endpoint.getSocketProperties().getSoTimeout());
ka.interestOps(SelectionKey.OP_READ);// this is what OP_REGISTER turns into.
PollerEvent r = endpoint.eventCache.poll();
// 有PollerEvent对象就重复利用，没有就新建一个
if (r == null)
r = new PollerEvent(socket, ka, endpoint.OP_REGISTER, endpoint);
else
r.reset(socket, ka, endpoint.OP_REGISTER);
addEvent(r);
}
最后调用addEvent()方法向Poller类中的如下变量添加了这个PollerEvent对象
protected ConcurrentLinkedQueue<Runnable> events = new ConcurrentLinkedQueue<Runnable>();
在Poller的run()方法中有一句代码如下：
hasEvents = (hasEvents | events());
调用了events()方法，如下：
public boolean events() {
boolean result = false;
Runnable r = null;
result = (events.size() > 0);
while ( (r = (Runnable)events.poll()) != null ) {
try {
r.run();
if ( r instanceof PollerEvent ) {
((PollerEvent)r).reset();
endpoint.eventCache.offer((PollerEvent)r);
}
} catch ( Throwable x ) {
// log.error("",x);
}
}
return result;
}
这个events中如果有PollEvent对象，那么调用t.run()方法运行，然后将这个对象存入eventCache()中。看一下PollEvent对象的run()方法，如下：
protected NioChannel socket;
protected int interestOps; // 感兴趣的集合
protected KeyAttachment key;
public void run() {
if ( interestOps == endpoint.OP_REGISTER ) { // 是注册事件
try {
socket.getIOChannel().register(socket.getPoller().getSelector(), SelectionKey.OP_READ, key);
} catch (Exception x) {
// log.error("", x);
}
} else {
final SelectionKey key = socket.getIOChannel().keyFor(socket.getPoller().getSelector());
try {
boolean cancel = false;
if (key != null) {
final KeyAttachment att = (KeyAttachment) key.attachment();
if ( att!=null ) {
//handle callback flag
if (att.getComet() && (interestOps & endpoint.OP_CALLBACK) == endpoint.OP_CALLBACK ) {
att.setCometNotify(true);
} else {
att.setCometNotify(false);
}
interestOps = (interestOps & (~endpoint.OP_CALLBACK));//remove the callback flag
att.access();//to prevent timeout
//we are registering the key to start with, reset the fairness counter.
int ops = key.interestOps() | interestOps;
att.interestOps(ops);
key.interestOps(ops);
att.setCometOps(ops);
} else {
cancel = true;
}
} else {
cancel = true;
}
if ( cancel )
socket.getPoller().cancelledKey(key,SocketStatus.ERROR,false);
}catch (CancelledKeyException ckx) {
try {
socket.getPoller().cancelledKey(key,SocketStatus.DISCONNECT,true);
}catch (Exception ignore) {}
}
}//end if
}//run
最主要的功能就是为NioChannel注册感兴趣的事件。这样我们就可以回到Poller的run()方法中看具体的操作了。
Iterator iterator = keyCount > 0 ? selector.selectedKeys().iterator() : null;
// Walk through the collection of ready keys and dispatch
// any active event.
while (iterator != null && iterator.hasNext()) {
SelectionKey sk = (SelectionKey) iterator.next();
KeyAttachment attachment = (KeyAttachment)sk.attachment();
// Attachment may be null if another thread has called
// cancelledKey()
if (attachment == null) {
iterator.remove();
} else {
attachment.access();
iterator.remove();
processKey(sk, attachment);
}
}//while
如果有感兴趣的事件发生，那么进入while循环后调用processKey()方法进行处理：
if ( close ) {
cancelledKey(sk, SocketStatus.STOP, false);
} else if ( sk.isValid() && attachment != null ) {
attachment.access();//make sure we don‘t time out valid sockets
sk.attach(attachment);//cant remember why this is here
NioChannel channel = attachment.getChannel();
if (sk.isReadable() || sk.isWritable() ) {
if ( attachment.getSendfileData() != null ) {
processSendfile(sk,attachment,true, false);
} else if ( attachment.getComet() ) {
//check if thread is available
if ( endpoint.isWorkerAvailable() ) {
//set interest ops to 0 so we don‘t get multiple
//invokations for both read and write on separate threads
reg(sk, attachment, 0);
//read goes before write
if (sk.isReadable()) {
//read notification
if (!endpoint.processSocket(channel, SocketStatus.OPEN))
endpoint.processSocket(channel, SocketStatus.DISCONNECT);
} else {
//future placement of a WRITE notif
if (!endpoint.processSocket(channel, SocketStatus.OPEN))
endpoint.processSocket(channel, SocketStatus.DISCONNECT);
}
} else {
result = false;
}
} else {
//later on, improve latch behavior
if ( endpoint.isWorkerAvailable() ) {
unreg(sk, attachment,sk.readyOps());
boolean close = (!endpoint.processSocket(channel));
if (close) {
cancelledKey(sk,SocketStatus.DISCONNECT,false);
}
} else {
result = false;
}
}
}
} else {
//invalid key
cancelledKey(sk, SocketStatus.ERROR,false);
}
进入后调用了NioEndpoint的processSocket()方法，如下：
public boolean processSocket(NioChannel socket, SocketStatus status) {
return processSocket(socket,status,true);
}
public boolean processSocket(NioChannel socket, SocketStatus status, boolean dispatch) {
try {
KeyAttachment attachment = (KeyAttachment)socket.getAttachment(false);
attachment.setCometNotify(false); //will get reset upon next reg
if (executor == null) {
getWorkerThread().assign(socket, status);
} else {
SocketProcessor sc = processorCache.poll();
if (sc == null ){
sc = new SocketProcessor(socket,status,this);
}else{
sc.reset(socket,status);
}
if ( dispatch ) executor.execute(sc);
else sc.run();
}
} catch (Throwable t) {
// This means we got an OOM or similar creating a thread, or that
// the pool and its queue are full
log.error(sm.getString("endpoint.process.fail"), t);
return false;
}
return true;
}
如果sc为空则新建，否则从processorCache中取出重置后重复利用。使用线程池或者直接调用run()方法执行，SocketProcesser类的run()方法有如下代码：
boolean closed = (status == null) ? (nioEndpoint.getHandler().process(socket) == Handler.SocketState.CLOSED) : (nioEndpoint.getHandler().event(socket, status) == Handler.SocketState.CLOSED);
获取Http11ConnectionHandler的process()对socket进行处理，如下：
public SocketState process(NioChannel socket) {
Http11NioProcessor processor = null;
try {
processor = connections.remove(socket);
if (processor == null) {
processor = recycledProcessors.poll();
}
if (processor == null) {
processor = createProcessor();
}
if (processor instanceof ActionHook) {
((ActionHook) processor).action(ActionCode.ACTION_START, null);
}
if (proto.ep.isSSLEnabled() && (proto.sslImplementation != null)) {
if (socket instanceof SecureNioChannel) {
SecureNioChannel ch = (SecureNioChannel)socket;
processor.setSslSupport(proto.sslImplementation.getSSLSupport(ch.getSslEngine().getSession()));
}else processor.setSslSupport(null);
} else {
processor.setSslSupport(null);
}
SocketState state = processor.process(socket);
if (state == SocketState.LONG) {
// In the middle of processing a request/response. Keep the
// socket associated with the processor.
connections.put(socket, processor);
socket.getPoller().add(socket);
} else if (state == SocketState.OPEN) {
// In keep-alive but between requests. OK to recycle
// processor. Continue to poll for the next request.
release(socket, processor);
socket.getPoller().add(socket);
} else {
// Connection closed. OK to recycle the processor.
release(socket, processor);
}
return state;
} catch (Exception e) {
e.printStackTrace();
}
release(socket, processor);
return SocketState.CLOSED;
}
剑指架构师系列-tomcat6通过IO复用实现connector
标签：out tween erro ini gis middle mil 线程池 rds
原文地址：http://www.cnblogs.com/mazhimazhi/p/7499393.html
