powercli 批量配置vmhost 初始信息

标签：set   powercli   vmhost   

#add distributed switch  to datacenter
 New-VDSwitch -Name vds-vmotion -Location Dtarget
 New-VDSwitch -Name vds-prd -Location Dtarget
 New-VDSwitch -Name vds-storage -Location Dtarget
#add portgroup to distributed switch
 Get-VDSwitch vds-prd  | New-VDPortgroup -Name 192.168.10.0 -VlanId 10
 Get-VDSwitch vds-vmotion  | New-VDPortgroup -Name 192.168.2.0 -VlanId 2
 Get-VDSwitch vds-storage  | New-VDPortgroup -Name 192.168.100.0 -VlanId 100


 $vmhostlist = import-csv E:\vmhostlist.csv

 foreach ($vmhost in $vmhostlist){
        
        #config dns,domainname,ntpserver to vmhost
         Get-VMHostNetwork -VMHost $vmhost.ip | Set-VMHostNetwork -DnsFromDhcp $false -DnsAddress 192.168.1.254 -DomainName test.org
         Add-VMHostNtpServer -VMHost $vmhost.ip -NtpServer 192.168.1.254                                                                                                                                                                                                                                                                                                      
         Get-VMHostService -VMHost $vmhost.ip | where {$_.Key -eq "ntpd"} | Start-VMHostService                                                                                                               
         Get-VMHostService -VMHost $vmhost.ip | where {$_.Key -eq "ntpd"} | Set-VMHostService -Policy Automatic
          
         #add vmhost to distributed switch
         Get-VDSwitch -Name vds-* | Add-VDSwitchVMHost -VMHost $vmhost.ip

         #add physicol adapter to standard switch up link
         $myVMHostNetworkAdapter = Get-VMhost $vmhost.ip | Get-VMHostNetworkAdapter -Physical -Name vmnic1
         Get-VirtualSwitch -VMHost $vmhost.ip -Name "vSwitch0" | Add-VirtualSwitchPhysicalNetworkAdapter -VMHostPhysicalNic $myVMHostNetworkAdapter -Confirm:$false 
          
          #add physicol adapter to distributed switch up link
         $nic = Get-VMhost $vmhost.ip| Get-VMHostNetworkAdapter -Physical -Name vmnic2,vmnic3
         Get-VDSwitch -VMHost $vmhost.ip -Name vds-prd | Add-VDSwitchPhysicalNetworkAdapter -VMHostPhysicalNic $nic -Confirm:$false
         $nic = Get-VMhost $vmhost.ip| Get-VMHostNetworkAdapter -Physical -Name vmnic4,vmnic5
         Get-VDSwitch -VMHost $vmhost.ip -Name vds-vmotion | Add-VDSwitchPhysicalNetworkAdapter -VMHostPhysicalNic $nic -Confirm:$false 
         $nic = Get-VMhost $vmhost.ip | Get-VMHostNetworkAdapter -Physical -Name vmnic6,vmnic7
         Get-VDSwitch -VMHost $vmhost.ip -Name vds-storage | Add-VDSwitchPhysicalNetworkAdapter -VMHostPhysicalNic $nic -Confirm:$false 
         
         #add vmkernel vMotion adn vsan traffic 
         New-VMHostNetworkAdapter -VMHost $vmhost.ip -VirtualSwitch vds-vmotion -PortGroup 192.168.2.0 -IP $vmhost.vmotionip -SubnetMask 255.255.255.0 -VMotionEnabled $true
         New-VMHostNetworkAdapter -VMHost $vmhost.ip -VirtualSwitch vds-storage -PortGroup 192.168.100.0 -IP $vmhost.storageip -SubnetMask 255.255.255.0 -VsanTrafficEnabled $true
 
 }

本文出自 “汜水流年_” 博客，请务必保留此出处http://timefiles.blog.51cto.com/8475652/1967853

powercli 批量配置vmhost 初始信息

标签：set   powercli   vmhost   

原文地址：http://timefiles.blog.51cto.com/8475652/1967853