一、环境介绍
Centos 6.7 2.6.32-573.el6.x86_64 软件包：percona-server-5.7.18-16.tar.gz 下载地址：https://www.percona.com/downloads/Percona-Server-LATEST/
二、编译安装
1、安装依赖包 #yum install cmake gcc-c++ git ncurses ncurses-devel bison bison-devel readline readline-devel -y 2、下载boost 地址： 下载的版本是boost_1_59_0.tar.gz 至于为什么是这个版本，后面会解释！ 创建目录boost #mkdir /usr/local/boost #cp boost_1_59_0.tar.gz /usr/local/boost 注:boost是编译安装percona-server的必备软件包，否则会报错的，后面会解释。 3、开始编译 #tar xf percona-server-5.7.18-16.tar.gz #cd percona-server-5.7.18-16 #cmake ./ -DCMAKE_INSTALL_PREFIX=/opt/app/mysql5 -DDEFAULT_CHARSET=utf8 -DDEFAULT_COLLATION=utf8_general_ci -DWITH_BOOST=/usr/local/boost cmake过程中可能会出现各种奇葩的报错，根据错误信息解决问题，后面会解释！ 如果依赖包都安装上之后，cmake之后，输出的信息（部分）如下 ……………… -- Library perconaserverclient depends on OSLIBS -lpthread;/usr/lib64/libz.so;m;rt;dl -- Check size of long long -- Check size of long long - done -- Check size of long -- Check size of long - done -- Check size of int -- Check size of int - done -- Check if the system is big endian -- Searching 16 bit integer -- Using unsigned short -- Check if the system is big endian - little endian -- Googletest was not found. gtest-based unit tests will be disabled. You can run cmake . -DENABLE_DOWNLOADS=1 to automatically download and build required components from source. -- If you are inside a firewall, you may need to use an https proxy: export https_proxy=http://example.com:80 -- Performing Test HAVE_UNUSED_TYPEDEFS -- Performing Test HAVE_UNUSED_TYPEDEFS - Failed -- Performing Test HAVE_MISLEADING_INDENTATION -- Performing Test HAVE_MISLEADING_INDENTATION - Failed -- Library mysqlserver depends on OSLIBS -lpthread;/usr/lib64/libz.so;m;rt;crypt;dl -- INSTALL perconaserverclient.pc lib/pkgconfig -- Skipping deb packaging on unsupported platform . -- CMAKE_BUILD_TYPE: RelWithDebInfo -- COMPILE_DEFINITIONS: _GNU_SOURCE;_FILE_OFFSET_BITS=64;HAVE_CONFIG_H;HAVE_LIBEVENT1 -- CMAKE_C_FLAGS: -Wall -Wextra -Wformat-security -Wvla -Wwrite-strings -Wdeclaration-after-statement -- CMAKE_CXX_FLAGS: -Wall -Wextra -Wformat-security -Wvla -Woverloaded-virtual -Wno-unused-parameter -- CMAKE_C_LINK_FLAGS: -- CMAKE_CXX_LINK_FLAGS: -- CMAKE_C_FLAGS_RELWITHDEBINFO: -O3 -D_FORTIFY_SOURCE=2 -g -fabi-version=2 -fno-omit-frame-pointer -fno-strict-aliasing -DDBUG_OFF -- CMAKE_CXX_FLAGS_RELWITHDEBINFO: -O3 -D_FORTIFY_SOURCE=2 -g -fabi-version=2 -fno-omit-frame-pointer -fno-strict-aliasing -DDBUG_OFF -- Configuring done -- Generating done -- Build files have been written to: /root/percona-server-5.7.18-16 #make #make的时间会很长，耐心等待。 ……………… Linking CXX static library libsql_embedded.a [ 99%] Built target sql_embedded [ 99%] Generating mysqlserver_depends.c Scanning dependencies of target mysqlserver [ 99%] Building C object libmysqld/CMakeFiles/mysqlserver.dir/mysqlserver_depends.c.o Linking C static library libmysqld.a /usr/bin/ar: creating /root/percona-server-5.7.18-16/libmysqld/libmysqld.a [ 99%] Built target mysqlserver Scanning dependencies of target mysql_client_test_embedded [ 99%] Building C object libmysqld/examples/CMakeFiles/mysql_client_test_embedded.dir/__/__/testclients/mysql_client_test.c.o Linking CXX executable mysql_client_test_embedded [ 99%] Built target mysql_client_test_embedded Scanning dependencies of target mysql_embedded [ 99%] Building CXX object libmysqld/examples/CMakeFiles/mysql_embedded.dir/__/__/client/completion_hash.cc.o [ 99%] Building CXX object libmysqld/examples/CMakeFiles/mysql_embedded.dir/__/__/client/mysql.cc.o [ 99%] Building CXX object libmysqld/examples/CMakeFiles/mysql_embedded.dir/__/__/client/readline.cc.o Linking CXX executable mysql_embedded [ 99%] Built target mysql_embedded Scanning dependencies of target mysqltest_embedded [ 99%] Building CXX object libmysqld/examples/CMakeFiles/mysqltest_embedded.dir/__/__/client/mysqltest.cc.o Linking CXX executable mysqltest_embedded [ 99%] Built target mysqltest_embedded Scanning dependencies of target my_safe_process [100%] Building CXX object mysql-test/lib/My/SafeProcess/CMakeFiles/my_safe_process.dir/safe_process.cc.o Linking CXX executable my_safe_process [100%] Built target my_safe_process #make install #这一步也需要一些时间，不过比make 快 ……………… -- Installing: /opt/app/mysql5/mysql-test/./extra/binlog_tests/database.test -- Installing: /opt/app/mysql5/mysql-test/./extra/binlog_tests/binlog_mysqlbinlog_fill.inc -- Installing: /opt/app/mysql5/mysql-test/./extra/binlog_tests/binlog_row_kill_create_select.test -- Installing: /opt/app/mysql5/mysql-test/./extra/binlog_tests/enforce_gtid_consistency_trx_nontrx_consistent.test -- Installing: /opt/app/mysql5/mysql-test/./extra/binlog_tests/tmp_table.test -- Installing: /opt/app/mysql5/mysql-test/./extra/binlog_tests/binlog_mysqlbinlog_start_stop.inc -- Installing: /opt/app/mysql5/mysql-test/./Makefile -- Installing: /opt/app/mysql5/mysql-test/./asan.supp -- Installing: /opt/app/mysql5/mysql-test/./mtr -- Up-to-date: /opt/app/mysql5/mysql-test/mtr -- Up-to-date: /opt/app/mysql5/mysql-test/mysql-test-run -- Installing: /opt/app/mysql5/mysql-test/lib/My/SafeProcess/my_safe_process -- Up-to-date: /opt/app/mysql5/mysql-test/lib/My/SafeProcess/my_safe_process -- Installing: /opt/app/mysql5/mysql-test/lib/My/SafeProcess/Base.pm -- Installing: /opt/app/mysql5/support-files/mysqld_multi.server -- Installing: /opt/app/mysql5/support-files/mysql-log-rotate -- Installing: /opt/app/mysql5/support-files/magic -- Installing: /opt/app/mysql5/share/aclocal/mysql.m4 -- Installing: /opt/app/mysql5/support-files/mysql.server
三、编译过程中遇到的问题
1、第1个问题： boost的问题 解压之后开始编译，如下参数 #cmake ./ -DCMAKE_INSTALL_PREFIX=/opt/app/mysql5 > -DDEFAULT_CHARSET=utf8 > -DDEFAULT_COLLATION=utf8_general_ci -- Running cmake version 2.8.12.2 -- Could NOT find Git (missing: GIT_EXECUTABLE) -- Configuring with MAX_INDEXES = 64U -- The C compiler identification is GNU 4.4.7 -- The CXX compiler identification is GNU 4.4.7 -- Check for working C compiler: /usr/bin/cc -- Check for working C compiler: /usr/bin/cc -- works -- Detecting C compiler ABI info -- Detecting C compiler ABI info - done -- Check for working CXX compiler: /usr/bin/c++ -- Check for working CXX compiler: /usr/bin/c++ -- works -- Detecting CXX compiler ABI info -- Detecting CXX compiler ABI info - done -- CMAKE_GENERATOR: Unix Makefiles -- Looking for SHM_HUGETLB -- Looking for SHM_HUGETLB - found -- Looking for sys/types.h -- Looking for sys/types.h - found -- Looking for stdint.h -- Looking for stdint.h - found -- Looking for stddef.h -- Looking for stddef.h - found -- Check size of void * -- Check size of void * - done -- SIZEOF_VOIDP 8 -- Performing Test HAVE_C_SHIFT_OR_OPTIMIZATION_BUG -- Performing Test HAVE_C_SHIFT_OR_OPTIMIZATION_BUG - Failed -- Performing Test HAVE_CXX_SHIFT_OR_OPTIMIZATION_BUG -- Performing Test HAVE_CXX_SHIFT_OR_OPTIMIZATION_BUG - Failed -- Performing Test HAVE_C_FLOATING_POINT_FUSED_MADD -- Performing Test HAVE_C_FLOATING_POINT_FUSED_MADD - Failed -- Performing Test HAVE_CXX_FLOATING_POINT_FUSED_MADD -- Performing Test HAVE_CXX_FLOATING_POINT_FUSED_MADD - Failed -- Performing Test HAVE_C_FP_CONTRACT_FLAG -- Performing Test HAVE_C_FP_CONTRACT_FLAG - Failed -- Performing Test HAVE_CXX_FP_CONTRACT_FLAG -- Performing Test HAVE_CXX_FP_CONTRACT_FLAG - Failed -- MySQL 5.7.18-16 -- Packaging as: percona-server-5.7.18-16-Linux-x86_64 -- Looked for boost/version.hpp in and -- BOOST_INCLUDE_DIR BOOST_INCLUDE_DIR-NOTFOUND -- LOCAL_BOOST_DIR -- LOCAL_BOOST_ZIP -- Could not find (the correct version of) boost. -- MySQL currently requires boost_1_59_0 CMake Error at cmake/boost.cmake:81 (MESSAGE): You can download it with -DDOWNLOAD_BOOST=1 -DWITH_BOOST=<directory> This CMake script will look for boost in <directory>. If it is not there, it will download and unpack it (in that directory) for you. If you are inside a firewall, you may need to use an http proxy: export http_proxy=http://example.com:80 Call Stack (most recent call first): cmake/boost.cmake:238 (COULD_NOT_FIND_BOOST) CMakeLists.txt:465 (INCLUDE) -- Configuring incomplete, errors occurred! See also "/root/percona-server-5.7.18-16/CMakeFiles/CMakeOutput.log". See also "/root/percona-server-5.7.18-16/CMakeFiles/CMakeError.log". 于是google、百度去搜索解决办法，发现需要安装boost，其实上面的信息已经告诉我们了！于是下载 下载地址：http://www.boost.org/users/history/ 我开始下载使用的是1.65.0的版本，地址： https://dl.bintray.com/boostorg/release/1.65.0/source/ 然后解压安装： #tar xf boost_1_65_0.tar.gz #mv boost_1_65_0 /usr/local/boost #cd /usr/local/boost # ./bootstrap.sh Building Boost.Build engine with toolset gcc... tools/build/src/engine/bin.linuxx86_64/b2 Detecting Python version... 2.6 Detecting Python root... /usr Unicode/ICU support for Boost.Regex?... not found. Generating Boost.Build configuration in project-config.jam... Bootstrapping is done. To build, run: ./b2 To adjust configuration, edit ‘project-config.jam‘. Further information: - Command line help: ./b2 --help - Getting started guide: http://www.boost.org/more/getting_started/unix-variants.html - Boost.Build documentation: http://www.boost.org/build/doc/html/index.html 然后继续执行： #./b2 #需要很长一些时间 ……………… common.mkdir bin.v2/libs/wave/build/gcc-4.4.7/release/threading-multi/cpplexer/re2clex gcc.compile.c++ bin.v2/libs/wave/build/gcc-4.4.7/release/threading-multi/cpplexer/re2clex/aq.o gcc.compile.c++ bin.v2/libs/wave/build/gcc-4.4.7/release/threading-multi/cpplexer/re2clex/cpp_re.o gcc.link.dll bin.v2/libs/wave/build/gcc-4.4.7/release/threading-multi/libboost_wave.so.1.65.0 common.copy stage/lib/libboost_wave.so.1.65.0 ln-UNIX stage/lib/libboost_wave.so ...failed updating 54 targets... ...skipped 6 targets... ...updated 1107 targets... 当完成到这一步就证明已经完成了boost_1_65_0的安装，然后继续重新编译，添加了1个参数，如下： # cmake ./ -DCMAKE_INSTALL_PREFIX=/opt/app/mysql5 > -DDEFAULT_CHARSET=utf8 > -DDEFAULT_COLLATION=utf8_general_ci > -DWITH_BOOST=/usr/local/boost -- Running cmake version 2.8.12.2 -- Configuring with MAX_INDEXES = 64U -- CMAKE_GENERATOR: Unix Makefiles -- SIZEOF_VOIDP 8 -- MySQL 5.7.18-16 -- Packaging as: percona-server-5.7.18-16-Linux-x86_64 -- Local boost dir /usr/local/boost -- Found /usr/local/boost/boost/version.hpp -- BOOST_VERSION_NUMBER is #define BOOST_VERSION 106500 CMake Warning at cmake/boost.cmake:266 (MESSAGE): Boost minor version found is 65 we need 59 Call Stack (most recent call first): CMakeLists.txt:465 (INCLUDE) -- BOOST_INCLUDE_DIR /usr/local/boost -- LOCAL_BOOST_DIR /usr/local/boost -- LOCAL_BOOST_ZIP LOCAL_BOOST_ZIP-NOTFOUND -- Could not find (the correct version of) boost. -- MySQL currently requires boost_1_59_0 CMake Error at cmake/boost.cmake:81 (MESSAGE): You can download it with -DDOWNLOAD_BOOST=1 -DWITH_BOOST=<directory> This CMake script will look for boost in <directory>. If it is not there, it will download and unpack it (in that directory) for you. If you are inside a firewall, you may need to use an http proxy: export http_proxy=http://example.com:80 Call Stack (most recent call first): cmake/boost.cmake:269 (COULD_NOT_FIND_BOOST) CMakeLists.txt:465 (INCLUDE) -- Configuring incomplete, errors occurred! See also "/root/percona-server-5.7.18-16/CMakeFiles/CMakeOutput.log". See also "/root/percona-server-5.7.18-16/CMakeFiles/CMakeError.log". 但是依然继续报错……在网上又找到了另外一个解决方法于是按照此方法操作 删除boost目录下的所有文件： #rm -rf /usr/local/boost/* 再添加1个编译参数，重新cmake，如下： #cmake ./ -DCMAKE_INSTALL_PREFIX=/opt/app/mysql5 -DDEFAULT_CHARSET=utf8 -DDEFAULT_COLLATION=utf8_general_ci -DDOWNLOAD_BOOST=1 -DWITH_BOOST=/usr/local/boost 会输出如下信息： -- Running cmake version 2.8.12.2 -- Configuring with MAX_INDEXES = 64U -- CMAKE_GENERATOR: Unix Makefiles -- SIZEOF_VOIDP 8 -- MySQL 5.7.18-16 -- Packaging as: percona-server-5.7.18-16-Linux-x86_64 -- Downloading boost_1_59_0.tar.gz to /usr/local/boost 可以看到在自己下载boost_1_59_0.tar.gz，这就是为什么开始的时候我选在下载1_59版本的原因！！！ 但是会卡在这里，于是停止编译，自己在官网下载boost_1_59_0.tar.gz 放在/usr/local/boost目录 2、cmake 过程中的软件包依赖问题 然后删除percona-server-5.7.18-16目录，重新解压编译 #cmake ./ -DCMAKE_INSTALL_PREFIX=/opt/app/mysql5 > -DDEFAULT_CHARSET=utf8 > -DDEFAULT_COLLATION=utf8_general_ci > -DWITH_BOOST=/usr/local/boost -- Running cmake version 2.8.12.2 -- Configuring with MAX_INDEXES = 64U -- CMAKE_GENERATOR: Unix Makefiles -- SIZEOF_VOIDP 8 -- MySQL 5.7.18-16 -- Packaging as: percona-server-5.7.18-16-Linux-x86_64 -- Local boost zip /usr/local/boost/boost_1_59_0.tar.gz -- cd /usr/local/boost; tar xfz /usr/local/boost/boost_1_59_0.tar.gz …… -- Check size of wint_t - done -- Could NOT find Curses (missing: CURSES_LIBRARY CURSES_INCLUDE_PATH) CMake Error at cmake/readline.cmake:66 (MESSAGE): Curses library not found. Please install appropriate package, remove CMakeCache.txt and rerun cmake.On Debian/Ubuntu, package name is libncurses5-dev, on Redhat and derivates it is ncurses-devel. Call Stack (most recent call first): cmake/readline.cmake:190 (FIND_CURSES) cmake/readline.cmake:264 (FIND_SYSTEM_READLINE) CMakeLists.txt:493 (MYSQL_CHECK_EDITLINE) -- Configuring incomplete, errors occurred! See also "/root/percona-server-5.7.18-16/CMakeFiles/CMakeOutput.log". See also "/root/percona-server-5.7.18-16/CMakeFiles/CMakeError.log". 结果又报了上面提示的错误，意思是找不到CURSES_LIBRARY， 解决方法： #rm -f CMakeCache.txt 安装依赖包： #yum install ncurses ncurses-devel readline readline-devel -y 注意:所以上面第二步，才提到在cmake的时候会遇到各种奇葩问题，其实是很多依赖包没有安装，安装 之后，重新cmake就ok了。
未完待续……
本文出自 “知识体系” 博客，请务必保留此出处http://linuxg.blog.51cto.com/4410110/1969238
原文地址：http://linuxg.blog.51cto.com/4410110/1969238
