码迷,mamicode.com
首页 > 其他好文 > 详细

printf占位符

时间:2017-09-29 22:47:30      阅读:241      评论:0      收藏:0      [点我收藏+]

标签:result   cas   published   read   red   reg   until   scan   expect   

function
<cstdio>

printf

int printf ( const char * format, ... );
Print formatted data to stdout
Writes the C string pointed by format to the standard output (stdout). If format includes format specifiers (subsequences beginning with %), the additional arguments following format are formatted and inserted in the resulting string replacing their respective specifiers.

Parameters

format
C string that contains the text to be written to stdout.
It can optionally contain embedded format specifiers that are replaced by the values specified in subsequent additional arguments and formatted as requested.

A format specifier follows this prototype: [see compatibility note below]
%[flags][width][.precision][length]specifier

Where the specifier character at the end is the most significant component, since it defines the type and the interpretation of its corresponding argument:
specifierOutputExample
d or i Signed decimal integer 392
u Unsigned decimal integer 7235
o Unsigned octal 610
x Unsigned hexadecimal integer 7fa
X Unsigned hexadecimal integer (uppercase) 7FA
f Decimal floating point, lowercase 392.65
F Decimal floating point, uppercase 392.65
e Scientific notation (mantissa/exponent), lowercase 3.9265e+2
E Scientific notation (mantissa/exponent), uppercase 3.9265E+2
g Use the shortest representation: %e or %f 392.65
G Use the shortest representation: %E or %F 392.65
a Hexadecimal floating point, lowercase -0xc.90fep-2
A Hexadecimal floating point, uppercase -0XC.90FEP-2
c Character a
s String of characters sample
p Pointer address b8000000
n Nothing printed.
The corresponding argument must be a pointer to a signed int.
The number of characters written so far is stored in the pointed location.
 
% A % followed by another % character will write a single % to the stream. %

The format specifier can also contain sub-specifiers: flags, width, .precision and modifiers (in that order), which are optional and follow these specifications:

flagsdescription
- Left-justify within the given field width; Right justification is the default (see width sub-specifier).
+ Forces to preceed the result with a plus or minus sign (+ or -) even for positive numbers. By default, only negative numbers are preceded with a - sign.
(space) If no sign is going to be written, a blank space is inserted before the value.
# Used with o, x or X specifiers the value is preceeded with 0, 0x or 0X respectively for values different than zero.
Used with a, A, e, E, f, F, g or G it forces the written output to contain a decimal point even if no more digits follow. By default, if no digits follow, no decimal point is written.
0 Left-pads the number with zeroes (0) instead of spaces when padding is specified (see width sub-specifier).

widthdescription
(number) Minimum number of characters to be printed. If the value to be printed is shorter than this number, the result is padded with blank spaces. The value is not truncated even if the result is larger.
* The width is not specified in the format string, but as an additional integer value argument preceding the argument that has to be formatted.

.precisiondescription
.number For integer specifiers (d, i, o, u, x, X): precision specifies the minimum number of digits to be written. If the value to be written is shorter than this number, the result is padded with leading zeros. The value is not truncated even if the result is longer. A precision of 0 means that no character is written for the value 0.
For a, A, e, E, f and F specifiers: this is the number of digits to be printed after the decimal point (by default, this is 6).
For g and G specifiers: This is the maximum number of significant digits to be printed.
For s: this is the maximum number of characters to be printed. By default all characters are printed until the ending null character is encountered.
If the period is specified without an explicit value for precision, 0 is assumed.
.* The precision is not specified in the format string, but as an additional integer value argument preceding the argument that has to be formatted.

The length sub-specifier modifies the length of the data type. This is a chart showing the types used to interpret the corresponding arguments with and without length specifier (if a different type is used, the proper type promotion or conversion is performed, if allowed):
 specifiers
lengthd iu o x Xf F e E g G a Acspn
(none) int unsigned int double int char* void* int*
hh signed char unsigned char         signed char*
h short int unsigned short int         short int*
l long int unsigned long int   wint_t wchar_t*   long int*
ll long long int unsigned long long int         long long int*
j intmax_t uintmax_t         intmax_t*
z size_t size_t         size_t*
t ptrdiff_t ptrdiff_t         ptrdiff_t*
L     long double        
Note regarding the c specifier: it takes an int (or wint_t) as argument, but performs the proper conversion to a char value (or a wchar_t) before formatting it for output.

Note: Yellow rows indicate specifiers and sub-specifiers introduced by C99. See<cinttypes> for the specifiers for extended types.
... (additional arguments)
Depending on the format string, the function may expect a sequence of additional arguments, each containing a value to be used to replace a format specifier in the format string (or a pointer to a storage location, for n).
There should be at least as many of these arguments as the number of values specified in the format specifiers. Additional arguments are ignored by the function.

Return Value

On success, the total number of characters written is returned.

If a writing error occurs, the error indicator (ferror) is set and a negative number is returned.

If a multibyte character encoding error occurs while writing wide characters, errno is set to EILSEQ and a negative number is returned.

Example

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
/* printf example */
#include <stdio.h>

int main()
{
   printf ("Characters: %c %c \n", ‘a‘, 65);
   printf ("Decimals: %d %ld\n", 1977, 650000L);
   printf ("Preceding with blanks: %10d \n", 1977);
   printf ("Preceding with zeros: %010d \n", 1977);
   printf ("Some different radices: %d %x %o %#x %#o \n", 100, 100, 100, 100, 100);
   printf ("floats: %4.2f %+.0e %E \n", 3.1416, 3.1416, 3.1416);
   printf ("Width trick: %*d \n", 5, 10);
   printf ("%s \n", "A string");
   return 0;
}


Output:

Characters: a A
Decimals: 1977 650000
Preceding with blanks:       1977
Preceding with zeros: 0000001977
Some different radices: 100 64 144 0x64 0144
floats: 3.14 +3e+000 3.141600E+000
Width trick:    10
A string

Compatibility

Particular library implementations may support additional specifiers and sub-specifiers.
Those listed here are supported by the latest C and C++ standards (both published in 2011), but those in yellow were introduced in C99 (only required for C++ implementations since C++11), and may not be supported by libraries that comply with older standards.

See also

printf占位符

标签:result   cas   published   read   red   reg   until   scan   expect   

原文地址:http://www.cnblogs.com/merlindu/p/7612642.html

(0)
(0)
   
举报
评论 一句话评论(0
登录后才能评论!
© 2014 mamicode.com 版权所有  联系我们:gaon5@hotmail.com
迷上了代码!