Load "D:
![技术分享]()
\\CMC5401C-G\\Project\\Objects\\CMC5401C-G.axf"
Set JLink Project File to "D:\CMC5401C-G\Project\JLinkSettings.ini"
* JLink Info: Device "STM32F103VE" selected.
JLink info:
------------
DLL: V5.00i, compiled Jul 10 2015 18:28:14
Firmware: J-Link V9 compiled Jun 23 2015 10:00:59
Hardware: V9.40
S/N : 59404809
Feature(s) : RDI, GDB, FlashDL, FlashBP, JFlash
* JLink Info: Found SWD-DP with ID 0x1BA01477
* JLink Info: Found SWD-DP with ID 0x1BA01477
* JLink Info: Found Cortex-M3 r1p1, Little endian.
* JLink Info: FPUnit: 6 code (BP) slots and 2 literal slots
* JLink Info: CoreSight components:
* JLink Info: ROMTbl 0 @ E00FF000
* JLink Info: ROMTbl 0 [0]: FFF0F000, CID: B105E00D, PID: 001BB000 SCS
* JLink Info: ROMTbl 0 [1]: FFF02000, CID: B105E00D, PID: 001BB002 DWT
* JLink Info: ROMTbl 0 [2]: FFF03000, CID: B105E00D, PID: 000BB003 FPB
* JLink Info: ROMTbl 0 [3]: FFF01000, CID: B105E00D, PID: 001BB001 ITM
* JLink Info: ROMTbl 0 [4]: FFF41000, CID: B105900D, PID: 001BB923 TPIU-Lite
* JLink Info: ROMTbl 0 [5]: FFF42000, CID: B105900D, PID: 101BB924 ETM-M3
ROMTableAddr = 0xE00FF003
Target info:
------------
Device: STM32F103VE
VTarget = 3.101V
State of Pins:
TCK: 0, TDI: 1, TDO: 0, TMS: 1, TRES: 1, TRST: 1
Hardware-Breakpoints: 6
Software-Breakpoints: 8192
Watchpoints: 4
JTAG speed: 6000 kHz
Full Chip Erase Done.
Programming Done.
Verify OK.
**JLink Warning: Mis-aligned memory write: Address: 0x20000000, NumBytes: 2, Alignment: 2 (Halfword-aligned)
Application running ...
Flash Load finished at 09:47:16
