码迷,mamicode.com
首页 > 其他好文 > 详细

华为交换机的VLAN基本配置

时间:2017-10-24 22:38:45      阅读:200      评论:0      收藏:0      [点我收藏+]

标签:dy

技术分享


配置SW1的vlan

<Huawei>

<Huawei>language-mode Chinese  //修改提示语言为中文

Changelanguage mode, confirm? [Y/N] y

提示:改变语言模式成功。

<Huawei>undo terminal monitor  //关闭终端显示信息

Info:Current terminal monitor is off.

<Huawei>system-view

Entersystem view, return user view with Ctrl+Z.

[Huawei]sysname SW1

[SW1]vlan 10

[SW1-vlan10]vlan 20

[SW1-vlan20]vlan 30

[SW1-vlan30]qu

[SW1]int e0/0/2

[SW1-Ethernet0/0/2]port link-type access

[SW1-Ethernet0/0/2]port default vlan 10

[SW1-Ethernet0/0/2]int e0/0/3

[SW1-Ethernet0/0/3]port link-type access

[SW1-Ethernet0/0/3]port default vlan 20

[SW1-Ethernet0/0/3]int e0/0/4

[SW1-Ethernet0/0/4]port link-type access

[SW1-Ethernet0/0/4]port default vlan 30

[SW1-Ethernet0/0/4]quit

[SW1]int e0/0/1

[SW1-Ethernet0/0/1]port link-type trunk

[SW1-Ethernet0/0/1]port trunk allow-pass vlan all   

[SW1-Ethernet0/0/1]quit

[SW1]interface Vlan 10

[SW1-Vlanif10]ip address 192.168.1.1 24

[SW1-Vlanif10]undo sh

[SW1-Vlanif10]int vlan 20

[SW1-Vlanif20]ip address 192.168.2.1 24

[SW1-Vlanif20]undo sh

[SW1-Vlanif20]int vlan 30

[SW1-Vlanif30]ipadd 192.168.3.1 24

[SW1-Vlanif30]undo sh

[SW1]display ip int br

*down:administratively down

^down:standby

(l):loopback

(s):spoofing

The numberof interface that is UP in Physical is 5

The numberof interface that is DOWN in Physical is 1

The numberof interface that is UP in Protocol is 4

The numberof interface that is DOWN in Protocol is 2

Interface                         IP Address/Mask      Physical  Protocol 

MEth0/0/1                         unassigned           down       down     

NULL0                             unassigned           up         up(s)    

Vlanif1                           unassigned           up         down     

Vlanif10                          192.168.1.1/24       up         up       

Vlanif20                          192.168.2.1/24       up         up       

Vlanif30                          192.168.3.1/24       up         up        

[SW1]display vlan

The totalnumber of vlans is : 4

------------------------------------------------------------------

U:Up;         D: Down;         TG: Tagged;         UT: Untagged;

MP:Vlan-mapping;               ST:Vlan-stacking;

#:ProtocolTransparent-vlan;    *:Management-vlan;

------------------------------------------------------------------

VID  Type       Ports                                                         

------------------------------------------------------------------

1    common UT: Eth0/0/1(U)     Eth0/0/5(D)     Eth0/0/6(D)                       Eth0/0/7(D)     Eth0/0/8(D)     Eth0/0/9(D)                       Eth0/0/10(D)    Eth0/0/11(D)    Eth0/0/12(D)                       Eth0/0/13(D)    Eth0/0/14(D)    Eth0/0/15(D)   

                Eth0/0/16(D)    Eth0/0/17(D)    Eth0/0/18(D)                       Eth0/0/19(D)    Eth0/0/20(D)    Eth0/0/21(D)                       Eth0/0/22(D)    GE0/0/1(D)      GE0/0/2(D)                                                     

10   common UT: Eth0/0/2(U)                                                       

            TG:Eth0/0/1(U)                                         20   common UT:Eth0/0/3(U)                                                    

            TG:Eth0/0/1(U)                                         30   common UT:Eth0/0/4(U)                                                     

            TG:Eth0/0/1(U)                                                     

 

 

VID  Status Property      MAC-LRN StatisticsDescription     

------------------------------------------------------------------

 

1    enable default       enable  disable   VLAN 0001             10   enable default       enable  disable   VLAN 0010

20   enable default       enable  disable   VLAN 0020             30   enable default       enable  disable   VLAN 0030           

配置SW2的vlan

<Huawei>

<Huawei>language-mode Chinese

Changelanguage mode, confirm? [Y/N] y

提示:改变语言模式成功。

<Huawei>undo terminal monitor

Info:Current terminal monitor is off.  

<Huawei>system-view

Entersystem view, return user view with Ctrl+Z.

[Huawei]sysname SW2

[SW2]vlan 10

[SW2-vlan10]vlan 20

[SW2-vlan20]vlan 30

[SW2-vlan30]qu

[SW2]int e0/0/2

[SW2-Ethernet0/0/2]port link-type access

[SW2-Ethernet0/0/2]port default vlan 10

[SW2-Ethernet0/0/2]int e0/0/3

[SW2-Ethernet0/0/3]port link-type access

[SW2-Ethernet0/0/3]port default vlan 20

[SW2-Ethernet0/0/3]int e0/0/4

[SW2-Ethernet0/0/4]port link-type access

[SW2-Ethernet0/0/4]port default vlan 30

[SW2-Ethernet0/0/4]qu

[SW2]int e0/0/1

[SW2-Ethernet0/0/1]port link-type trunk

[SW2-Ethernet0/0/1]port trunk allow-pass vlan all

[SW2-Ethernet0/0/1]qu

[SW2]int vlan 10

[SW2-Vlanif10]ip address 192.168.1.1 24

[SW2-Vlanif10]undo sh

[SW2-Vlanif10]int vlan 20

[SW2-Vlanif20]ip address 192.168.2.1 24

[SW2-Vlanif20]undo sh

[SW2-Vlanif20]int vlan 30

[SW2-Vlanif30]ip address 192.168.3.1 24

[SW2-Vlanif30]undo sh

[SW2-Vlanif30]qu

[SW2]display ip int br

*down:administratively down

^down:standby

(l):loopback

(s):spoofing

The numberof interface that is UP   in Physical is 5

The numberof interface that is DOWN in Physical is 1

The numberof interface that is UP   in Protocol is 4

The numberof interface that is DOWN in Protocol is 2

 

Interface                         IP Address/Mask      Physical  Protocol 

MEth0/0/1                         unassigned           down       down     

NULL0                             unassigned           up         up(s)    

Vlanif1                           unassigned           up         down     

Vlanif10                          192.168.1.1/24       up         up       

Vlanif20                          192.168.2.1/24       up         up       

Vlanif30                          192.168.3.1/24       up       up       

[SW2]display vlan

The totalnumber of vlans is : 4

------------------------------------------------------------------

U:Up;         D: Down;         TG: Tagged;         UT: Untagged;

MP:Vlan-mapping;               ST: Vlan-stacking;

#:ProtocolTransparent-vlan;    *:Management-vlan;

------------------------------------------------------------------

VID  Type   Ports                                                         

------------------------------------------------------------------

1    common UT:Eth0/0/1(U)    Eth0/0/5(D)     Eth0/0/6(D)                        Eth0/0/7(D)    Eth0/0/8(D)     Eth0/0/9(D)                        Eth0/0/10(D)   Eth0/0/11(D)    Eth0/0/12(D)                        Eth0/0/13(D)   Eth0/0/14(D)    Eth0/0/15(D)   

               Eth0/0/16(D)   Eth0/0/17(D)    Eth0/0/18(D)                        Eth0/0/19(D)   Eth0/0/20(D)    Eth0/0/21(D)                        Eth0/0/22(D)   GE0/0/1(D)      GE0/0/2(D)           10   common UT:Eth0/0/2(U)                                                     

            TG:Eth0/0/1(U)                                         20   common UT:Eth0/0/3(U)                                                    

            TG:Eth0/0/1(U)                                         30   common UT:Eth0/0/4(U)                                                    

            TG:Eth0/0/1(U)                                                    

VID  Status Property      MAC-LRN StatisticsDescription     

------------------------------------------------------------------

1    enable default       enable  disable   VLAN 0001             10   enable default       enable  disable   VLAN 0010             20   enable default       enable  disable   VLAN 0020             30   enable default       enable  disable   VLAN 0030             配置完后用PC机开始互相PING

技术分享

技术分享

几台PC机都能互相PING通。

本文出自 “DY” 博客,请务必保留此出处http://guochenyong.blog.51cto.com/11367898/1975756

华为交换机的VLAN基本配置

标签:dy

原文地址:http://guochenyong.blog.51cto.com/11367898/1975756

(0)
(0)
   
举报
评论 一句话评论(0
登录后才能评论!
© 2014 mamicode.com 版权所有  联系我们:gaon5@hotmail.com
迷上了代码!