centos7搭建svn服务器及客户端设置

mkdir -p /var/svn

svnserve -d -r /var/svn

[root@model ~]# cd /var/svn[root@model svn]#  [root@model svn]# [root@model svn]# svnadmin create something[root@model svn]# [root@model svn]# [root@model svn]# cd something[root@model something]# [root@model something]# [root@model something]# lsconf  db  format  hooks  locks  README.txt[root@model something]# [root@model something]# [root@model something]# cd conf[root@model conf]# [root@model conf]# [root@model conf]# lsauthz  passwd  svnserve.conf[root@model conf]# [root@model conf]# 

[root@model conf]# [root@model conf]# vi svnserve.conf### This file controls the configuration of the svnserve daemon, if you### use it to allow access to this repository.  (If you only allow### access through http: and/or file: URLs, then this file is### irrelevant.)### Visit http://subversion.apache.org/ for more information.[general]### The anon-access and auth-access options control access to the### repository for unauthenticated (a.k.a. anonymous) users and### authenticated users, respectively.### Valid values are "write", "read", and "none".### Setting the value to "none" prohibits both reading and writing;### "read" allows read-only access, and "write" allows complete### read/write access to the repository.### The sample settings below are the defaults and specify that anonymous### users have read-only access to the repository, while authenticated### users have read and write access to the repository.# anon-access = read# auth-access = writeanon-access = noneauth-access = write### The password-db option controls the location of the password### database file.  Unless you specify a path starting with a /,### the file‘s location is relative to the directory containing### this configuration file.### If SASL is enabled (see below), this file will NOT be used.### Uncomment the line below to use the default password file.# password-db = passwdpassword-db = passwd### The authz-db option controls the location of the authorization### rules for path-based access control.  Unless you specify a path### starting with a /, the file‘s location is relative to the the### directory containing this file.  If you don‘t specify an### authz-db, no path-based access control is done.### Uncomment the line below to use the default authorization file.# authz-db = authzauthz-db = authz### This option specifies the authentication realm of the repository.### If two repositories have the same authentication realm, they should### have the same password database, and vice versa.  The default realm### is repository‘s uuid.# realm = My First Repository

#此选项指定的库的认证领域
raalm = /var/svn/something
### The force-username-case option causes svnserve to case-normalize### usernames before comparing them against the authorization rules in the### authz-db file configured above.  Valid values are "upper" (to upper-### case the usernames), "lower" (to lowercase the usernames), and### "none" (to compare usernames as-is without case conversion, which### is the default behavior).# force-username-case = none[sasl]### This option specifies whether you want to use the Cyrus SASL### library for authentication. Default is false.### This section will be ignored if svnserve is not built with Cyrus### SASL support; to check, run ‘svnserve --version‘ and look for a line### reading ‘Cyrus SASL authentication is available.‘# use-sasl = true### These options specify the desired strength of the security layer### that you want SASL to provide. 0 means no encryption, 1 means### integrity-checking only, values larger than 1 are correlated"svnserve.conf" 71L, 3173C written

[root@model conf]# vi passwd### This file is an example password file for svnserve.### Its format is similar to that of svnserve.conf. As shown in the### example below it contains one section labelled [users].### The name and password for each user follow, one account per line.[users]# harry = harryssecret# sally = sallyssecretuser = 123456~~"passwd" 11L, 326C written

[root@model conf]# [root@model conf]# vi authz### This file is an example authorization file for svnserve.### Its format is identical to that of mod_authz_svn authorization### files.### As shown below each section defines authorizations for the path and### (optional) repository specified by the section name.### The authorizations follow. An authorization line can refer to:###  - a single user,###  - a group of users defined in a special [groups] section,###  - an alias defined in a special [aliases] section,###  - all authenticated users, using the ‘$authenticated‘ token,###  - only anonymous users, using the ‘$anonymous‘ token,###  - anyone, using the ‘*‘ wildcard.###### A match can be inverted by prefixing the rule with ‘~‘. Rules can### grant read (‘r‘) access, read-write (‘rw‘) access, or no access### (‘‘).[aliases]# joe = /C=XZ/ST=Dessert/L=Snake City/O=Snake Oil, Ltd./OU=Research Institute/CN=Joe Average[groups]# harry_and_sally = harry,sally# harry_sally_and_joe = harry,sally,&joe
admin = user
# [/foo/bar]# harry = rw# &joe = r# * =

[/]
user = rw

# [repository:/baz/fuz]# @harry_and_sally = rw# * = r
[something:/]
@admin = rw
~~~~~~"authz" 35L, 1093C written

systemctl stop firewalld.service

systemctl disable firewalld.service

[root@localhost svn]# [root@localhost svn]# systemctl stop firewalld.service[root@localhost svn]# [root@localhost svn]# systemctl disable firewalld.serviceRemoved symlink /etc/systemd/system/dbus-org.fedoraproject.FirewallD1.service.Removed symlink /etc/systemd/system/basic.target.wants/firewalld.service.[root@localhost svn]# 

[root@localhost /]# [root@localhost /]# mkdir /svn[root@localhost /]# [root@localhost /]# 

[root@localhost svn]# [root@localhost svn]# [root@localhost svn]# svn co --username user --password 123456 svn://192.168.100.1/something-----------------------------------------------------------------------注意!  你的密码，对于认证域:   <svn://192.168.100.1:3690> /var/svn/something只能明文保存在磁盘上!  如果可能的话，请考虑配置你的系统，让 Subversion可以保存加密后的密码。请参阅文档以获得详细信息。你可以通过在“/root/.subversion/servers”中设置选项“store-plaintext-passwords”为“yes”或“no”，来避免再次出现此警告。-----------------------------------------------------------------------保存未加密的密码(yes/no)?nA    something/packageA    something/package/apache-maven-3.5.0-bin.tar.gzA    something/package/mysql-5.6.37-linux-glibc2.12-x86_64.tar.gzA    something/package/jdk-8u141-linux-x64.gzA    something/package/apache-tomcat-7.0.79.tar.gz取出版本 6。[root@localhost svn]# [root@localhost svn]# lssomething[root@localhost svn]# [root@localhost svn]# 

[root@localhost package]# [root@localhost package]# [root@localhost package]# svn up /svn/something正在升级 ‘/svn/something‘:认证领域: <svn://192.168.100.1:3690> /var/svn/something“user”的密码: -----------------------------------------------------------------------注意!  你的密码，对于认证域:   <svn://192.168.100.1:3690> /var/svn/something只能明文保存在磁盘上!  如果可能的话，请考虑配置你的系统，让 Subversion可以保存加密后的密码。请参阅文档以获得详细信息。你可以通过在“/root/.subversion/servers”中设置选项“store-plaintext-passwords”为“yes”或“no”，来避免再次出现此警告。-----------------------------------------------------------------------保存未加密的密码(yes/no)?nD    jenkins.war更新到版本 7。[root@localhost package]# [root@localhost package]# [root@localhost package]#