码迷,mamicode.com
首页 > 其他好文 > 详细

053-531

时间:2017-11-07 14:32:39      阅读:171      评论:0      收藏:0      [点我收藏+]

标签:restart   been   ges   bsp   ups   attach   info   reference   over   

When starting up your ASM instance, you receive the following error:

技术分享
What is the cause of the error?
A. The ASM_DISKGROUPS parameter is configured for three disk groups: DGROUP1, DGROUP2, and
DGROUP3.
The underlying disks for these disk groups have apparently been lost.
B. The format of the ASM_DISKGROUPS parameter is incorrect. It should reference the disk group
numbers, not the names of the disk groups
C. The ASM_POWER_LIMIT parameter is incorrectly set to 1. It should be set to the number of disk
groups being attached to the ASM instance.
D. The ASM_DISKSTRING parameter is not set; therefore disk discovery is not possible.
E. There is insufficient information to solve this problem.

  The ASM_DISKSTRING parameter is not set correctly.When the ASM instance is started,it will 
use the ASM_DISKSTRING to do ASM disk discovery.Correct the ASM_DISKSTRING parameter,and 
restart the instance to correct the problem.

053-531

标签:restart   been   ges   bsp   ups   attach   info   reference   over   

原文地址:http://www.cnblogs.com/Babylon/p/7798572.html

(0)
(0)
   
举报
评论 一句话评论(0
登录后才能评论!
© 2014 mamicode.com 版权所有  联系我们:gaon5@hotmail.com
迷上了代码!