标签：wan who recovery sys form span fonts ring nts
You are an Oracle DBA responsible for an ASM instance. The disk controller on your system fails.
You suspect that the disk itself is okay. You know it will take 24 hours to replace the controller and you don‘t want to have to rebuild the disks from scratch. What do you do?
A. Take the whole disk group offline and wait for the controller card to be installed. Once it‘s installed,bring the disk group online again.
B. Change the ASM parameter ASM_PREFERRED_READ_FAILURE_GROUPS to indicate that you want to read from the non-failed disk. Once the disk controller is replaced, reset the parameter to its original value.
C. You have no choice but to rebuild the disk. Drop the disk from the disk group and wait for the controller to be replaced. Once the controller is replaced, add the disk back into the disk group and allow ASM to rebuild it.
D. If you are using any setting other than REDUNDANCY EXTERNAL for your disk group, you will have to recover any data on that disk from a backup. The database will be unavailable until you can correct the problem and perform recovery.
E. Change the attribute DISK_REPAIR_TIME on the disk group to a time greater than 24 hours.
The DISK_REPAIR_TIME attribute will prevent Oracle from automatically dropping the disk in
the disk gourp for a specific period of time.This gives you time to replace the controller indicated
in the question.
标签：wan who recovery sys form span fonts ring nts
原文地址：http://www.cnblogs.com/Babylon/p/7803643.html
